DALI-2 4 inch Display

Lunatone 7 inch DALI-2 Operator 86456840 The capacitive 7" Display with 24 bit color depth enables installing as well as control and operation of a DALI System. The display can be individually designed using numerous widgets. For example, dimming and switching of groups and individual addresses, RGB color light management, color temperature control are available. DALI, USBmini and WLAN are available as interfaces. It is also possible to measure: Temperature Moisture Air pressure Air quality Possible thanks to integrated sensors. The DALI-2 Operator is used for installing (version display 7 plus) and control of DALI systems. The digital DALI protocol, IEC62386 standard, is used to control lighting equipment. All luminaires, groups and individual luminaires can be controlled and scenes can be called up via the display interface. The user interface can be designed individually, both background images, colors as well as the function, position and Button size. Version display 7" The plus version also allows the following functions: Addressing and commissioning a DALI system Circadian daylight gradients (Human Centric Lighting) - coming soon Weekday-controlled processes (Schedules) - coming soon sequences - coming soon Automation & ndash; coming soon Blind control - coming soon Version for emergency light monitoring & ndash; coming soon With the standard version, this is possible independently via DALI-USB-Interface and the software DALI-Cockpit. Specifications: Technical data   Ambient temperature -10 ° C to + 50 ° C Protection class IP20 Connection wires cross-section max. 1.5mm2 assembly to installation box     function   Device type Control device Multimaster capable Yes Interfaces DALI     Electrical data   Supply voltage display 24-56V DC Energy demand display 3.5W Resolution display 1024 x 600 px Colors display 24 bit     Housing and dimensions   Length 178mm Width 8mm Height 111mm color white (black and special colors on request) Housing color metal gray Installation of the Lunatone: The DALI-2 display is connected directly to the DALI bus. A DALI bus voltage supply is required. The device requires an additional 24V supply, which is connected to the terminals provided for this. The connection to the DALI terminals can be made regardless of polarity. The bus input is protected against overvoltages (mains voltage). The wiring should be carried out as a permanent installation in a dry and clean environment. The installation may only be carried out when the system is de-energized and by qualified specialists. National regulations for the installation of electrical systems must be observed. The DALI lines can be implemented with standard low-voltage installation material. No special cables are required. Only 1 conductor may be connected to each terminal. When using double wire end sleeves, the connection capability of the terminal must be observed.

DALI-2 touch panel 24035410 Lunatone Multifunctional DALI-2 control module with flexible button layout. The DALI-2 touch panel serves as a universal module for controlling DALI-compatible lights. An overview of the different user interfaces available can be found here. Properties Multifunctional operating device for DALI and DALI-2 systems Application Controller: Direct control of DALI devices Multimaster capable. Several modules can be installed in a DALI circuit and / or a DALI group. In addition to the standard DALI commands, the application controller also enables DALI DT8 TC and RGB (W) control and macros. Capacitive touch control surface Instance mode: Simple integration through 16 DALI-2 pushbutton instances and 5 DALI-2 analog instances (slider) Up to 16 configurable keys. Standard layouts and factory settings for easy installation without configuration Easy installation: mounting on a flush-mounted box Flexible layout - individual design & ndash; Layout exchange on site, additional printed layout glasses available as accessories The module is supplied by the DALI circuit, no additional supply necessary Version with integrated Dali Power Supply available Simple configuration via LUNATONE DALI USB interface and DALI cockpit software tool. DALI-2 control unit according to IEC62386-103. Control surface made of glass Frame material made of plastic (RAL 9016). Aluminum frames or customer-specific frame colors on request. Integrated DALI-2 application controller Specifications of the DALI-2 touch panel Type of output DALI, DALI-2, multimaster, supply Voltage range 9.5V? 22,5Vdc according to IEC62386 typ. Current consumption DALI (at 16.5V) 2 mA Operating temperature -20 ° C? + 45 ° C Dimensions 87.7mm x 87.7mm x 16.5mm Assembly Installation installation box Installation in protection class II devices Expected lifetime 100,000h Manufacturer-specific operating modes Application Controller, DALI-2 Instancemode Take further data from the download tab. The "Extra Glass" variant requires an order using the Lunatone configurator Various ready-made designs can also be loaded in the configurator or created individually online. The configuration of an individual frame color is also possible using the configurator. Please note: Additional costs may be due here, as well as the acceptance of a minimum order quantity. If you are interested in an individual design, please feel free to contact us.