DALI Expander Unit 89453847

€169.06*

Prices incl. VAT plus shipping costs

Version

Product number: 559-89453847

Product information "DALI Expander Unit 89453847"

DALI Expander Unit 89453847 for DALI System Expansion with Integrated Bus Supply

The DALI expander can be used to set up your own DALI sub-circuit and supply it with energy and information. In this way, additional DALI operating devices in the DALI sub-circuit can be broadcast controlled via the address of the DALI expander. Alternatively, the DALI Expander can also control the DALI devices in the sub-circuit directly via its switch & dim button input. It has an integrated DALI bus supply (200mA) for 90 DALI devices in the sub-circuit. In addition to increasing the number of electronic ballasts in a DALI circuit, the expander can also be used to extend the cable length of usually up to 300m.

Product Properties / Features:

DALI expander unit for expanding a DALI circuit and controlling several DALI devices via one DALI address
For the higher-level DALI circuit, the DALI expander behaves like a DALI ECG (DALI IN) with a DALI address
Broadcast forwarding of the DALI commands received at the input (DALI IN) to the output (DALI OUT)
Output (DALI OUT) with DALI power supply (200mA) for supplying DALI ECGs and DALI control devices
Alternative control option for the DALI output circuit via the switch & dim input (broadcast)
Galvanic separation between the DALI circuits
Available as
- DIN rail module (for installation in protection class II devices)
- Independent control gear (for ceiling installation or luminaire installation)

Technical data:

Type	DALI Expander
Article number	89453847	89453847-S	89453847-HS
Entrance: L, N
Type of input	Supply, mains voltage
Identification of terminals	L, N
Input voltage range	100Vac ... 240Vac		110Vac ... 230Vac
Input current max.	40mA (@ 120Vac), 20mA (@ 240Vac)
Frequency	50Hz / 60Hz
Power consumption max.	5,3W
Switch-on ramp-up time	250ms
Input: DA, DA
Type of input	DALI control input
Identification of terminals	DA, DA
Input voltage range	9.5V ... 22.5V
Current consumption DALI	2mA
Entrance: L ', N
Type of input	SwitchDim control input		-
Identification of terminals	L ‘, N		-
Input voltage range	230Vac		-
Frequency input voltage	50Hz / 60Hz		-
Control pulse length min.	40ms		-
Control pulse length long key press	500ms		-
Output: DA +, DA-
Type of output	DALI bus supply
Identification of terminals	DA +, DA-
Output voltage range	12Vdc ... 20.5Vdc
Guaranteed DALI output current	200mA
Idle proof	Yes
Short-circuit proof	Yes
Environmental conditions:
Transport and storage temperature	- 20 ° C ... + 75 ° C
Operating temperature	- 20 ° C ... + 60 ° C
Rel. Humidity	15% ... 90% rH, non-condensing
General data:
Assembly	False ceiling installation		DIN rail
Max. Rated temperature	70 ° C		75 ° C
Expected lifetime	50,000 h
Protection class	II
Degree of protection (housing / terminals)	IP40 / IP20
Dimensions (LxWxH)	120 x 41 x 22 mm	120 x 30 x 22 mm	98 x 17.5 x 56 mm

For more information, please refer to the data sheet in the download tab.

Application/IP-Code:	IP20 - IP44 (Indoor)
Dimmable/Control:	DALI
Lamp shape:	DIN Rail, Recessed ceiling, Throw-in ceiling
Power range:	5 - 20 W

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

sw_similar

DALI repeater unit for expansion 86458401

DALI repeater Unit for extending the DALI line length The DALI Repeater 86458401 is used to extend the DALI bus. The DALI line from usually a maximum of 300m can thus be extended to a maximum of 600m. A DALI PS with up to 250mA supply current can be installed on both sides to supply the bus devices on both galvanically isolated sides. The DALI repeater operates bidirectionally and can therefore also be installed anywhere in multi-master systems. Product characteristics Galvanic isolation between the DALI circuits The maximum number of DALI devices in the entire network is 64, the devices can be distributed to the subnets as required gain and forwarding of the DALI signal Restricted cascading (series connection) of several repeaters in multi-master operation Any structure of star-shaped and cascaded networks in single master operation Unit for extending the length of the DALI control line from up to 300m to 600m The module is suitable for DIN rail mounting A separate power supply is required for each DALI subcircuit (DALI PS) Technical Data: Supply: from DALI bus Typical current consumption of main control circuit: 6 mA Typical current consumption of sub-control circuit: 4 mA Input/Output: DALI / DALI Assembly: DIN rail Dimensions (L x W x T): 90 mm x 17 mm x 58 mm Operating temperature: 0 °C - 50 °C Storage temperature: -20 °C - 70 °C Protection type: IP20 Protection class: SK2

€195.18*

DALI GC/GC-A group control module

DALI GC/GC-A group control module Module for the control of two predefined DALI groups with a conventional light buttonThe DALI GC and GC-A are control units for the control of 2 DALI groups. With help of this compact module, light switches or buttons can send dimming and switching commands to two DALI groups.A rotary switch on the housing DALI GC/GC-A offers the possibility to preselect the DALI resp. luminaire group. The modules are installed in the flush-mounted box behind the light switches and get their supply directly from the DALI-Bus. Product specifications The DALI GC offers in contrast to the DALI GC-A the possibility, to address luminaires and add them to groups resp. delete them. Compact control module to generate switching or dimming commands for two DALI groups With help of a rotary switch on the module housing the selection of the DALI groups that are addressed happens. The inputs can be controlled with standard buttons Multiple modules can be installed within a DALI circuit The module can be installed in a flush-mounted box or directly behind the light button The supply of the module happens directly through the DALI line and doesn't have to be connected to the grid The buttons are connected directly to the module (make potential-free contact) Technical data: Supply: via DALI bus Current consumption: 6 mA Inputs: 2 buttons single/double Outputs: DALI (broadcast) Groups: 2 of 16 (broadcast) Group selection: rotary switch Temperature: 0 °C - 50 °C Protection type: IP20 Connected wires: 0.75 mm2 Connected length: 250 mm

Variants from €56.87*

€54.16*

Details

DALI Expander 3 Unit

DALI Expander Unit for extending a DALI circuit (with integrated bus power supply for 3 DALI sub-circuits) With the DALI Expander 3, three new DALI sub-lines can be created and supplied with power and information. Further DALI operating devices in the DALI subcircuits can be controlled via one DALI address each (Broadcast). Alternatively the DALI sub-lines can be controlled directly with Switch&Dim inputs. The DALI Expander 3 has an integrated DALI bus supply (200mA) for up to max. 3 times 25 DALI devices. The amount of DALI units as well as the line length (up to 300m) can be increased using the DALI Expander 3 Overview: Device for DALI-line expansion Control of several DALI-devices via 3 DALI-addresses 3 DALI outputs (DALI A,B,C) with integrated DALI power supply (50mA each) for powering control gear and control devices For the superordinate DALI circuit the DALI expander acts like 3 separate DALI control gear – 3 DALI addresses, one for each subnet (A, B, C) Forwarding commands received at the input (DALI IN) to the corresponding output (DALI A, B, C) broadcast Alternative control options of the DALI-output circuits via Switch&Dim-inputs (Broadcast). Group commands are passed from one to the other output circuits (cross function) Galvanic isolation between DALI-input and DALI-outputs Independent control gear for remote ceiling an integration in luminaires Type DALI Expander-3 Electrical data Supply 100V-240V AC Max. output current 3 x 50mA (DALI) Current consumption DALI (DALI IN) 2mA Input/Output DALI / DALI Technical data Ambient temperature -20°C bto +60°C Protection class IP20 Expected life time @tc 50.000 h Mounting Remote ceiling integration in class II devices Dimensions (L x W x H) 120mm x 41mm x 22mm For further information, please refer to the data sheet in the download tab.

€242.83*