Accessories for K3-Writer outdoor wall light For the K-3 Writer wall exterior light, there is a wide range of accessories, with which it is possible to adjust the lighting individually to your own wishes and ideas. Overview of the accessories: Lense for 1 blade Lense for 5 blades Leaf shape 30° shape Colour filter in the colours green, blue, red, orange Further information on the respective accessories can be found in the data sheets in the Download tab.

LED Wall Light with IP65 protection for special light effects A small lighting cube containing the magic effects of the last generation power leds. he best efficiency and its 50.000 hour life permit K3 Miniled to be the winning match wherever energy saving and non-invasive look are required. For outdoor as usual but for indoor as well when the light is the main feature. The combination of the light beam sis veratile. K3 MiniLed includes 3 lights, either just one opening, or two opposite openings, or four openings. There are two different beam angles: 30 and 70 °. The construction is in primary aluminium - three colors. K3 Miniled is IP65 absolutely waterproof and can be oriented everywhere - towards down, up or 45°. Suitable to be installed in any surface - wall floor and ceiling. General features: Light emission with clear marking of the light Ceiling and wall mounting, in the garden also floor mounting Rear cable entry Wall light with IP65 protection LED with 50,000 h lifetime and max. Lumen drop of 30% Built-in driver Manufactured in compliance with European standards EN 60598-1:2015 Version with 3000K or 4000K, 1 to 4 light emissions, different beam angles Technical data: Light up with LED LED LED Quantity lamps 1 2 4 System power 3 W 6 W 12 W Beam angle 30° / 70° 30°- 30° / 70°- 70° / 30°- 70° 4x30° / 4x70° Operating current 700 mA Connection voltage 230V Colour rendering index CRI > 85 Mechanical load IK08 Energy efficacy A++ - A Protection type IP65 Protection class II Dimensions L=100*W=102*H=100 mm For further information please refer to the data sheet in the Download-tab.

LED Outdoor wall light Wash42 The milled opal glass screens create a soft, comfortable light. To prevent water build-up on the surface of the wall light, the glass shade is flush mounted with the frame. The latest-generation LED light sources ensure high luminous efficacy and a long durability. General features: Opal glass and linear LED module Marine die-cast aluminium alloy housing Rear cable entry Protection type: IP65 Protection class I Housing colours white, graphite grey and metal grey Colour temperature 3000K and 4000K Built-in electronic power supply Technical: Light up with Linear LED module Quantity lamps 1 2 System power 11W Colour temperature 3000K / 4000K 3000K / 4000K Operating current 700mA Luminous flux 640 lm 1280 lm System efficacy 58 lm/W Colour rendering index CRI >80 Energy efficacy A++ - A Mechanical load IK08 Protection type IP65 Protection class I Lifespan L80 B20; 60.000 h Dimensions L=421*W=71*H=70 mm Weight 2,024 kg For further information please refer to the data sheet in the Download-tab.

LED exterior wall light K3-Power for optimal light outputK3 Power comes with a wide range of parabolic reflectors designed on the base of a dedicated optical project and produces interesting light efficiency, until 69%. Three housings with one, two or four openings and two different light beams (20 ° and 50 °) enable the design of attractive lighting effects.The aluminum housing is available in three different colours, the discs are flush mounted with the frame. Suitable to any installation surface – wall, floor and ceiling – is absolutely waterproof and can be oriented in any direction – up, down, 45°. General features: Structure: diffuser in tempered glass, ultrawhite. Housing made of die-cast aluminum with reduced copper content or AISI 316L stainless steel. Colour-matched hexagon screws Internal optics made of polished Al 98.8 to emphasize the light beam With the additional equipment A-K3 Power the lamp is adjustable Ceiling and wall mounting, in the garden also floor mounting Rear cable entry LED with 50,000 h lifetime and max. Lumen drop of 30% Built-in driver Manufactured in compliance with European standards EN 60598-1:2015 Version with 3000K or 4000K, different housing colours and light emissions Light up with LED LED Quantity lamps 1 2 Beam angle 20° / 50° 20°-20° / 50°-50° / 20°-50° System power 9,5W 2 x 9,5W Operating current 500mA Connection voltage 230V Colour rendering index CRI > 85 Mechanical load IK08 Energy efficacy A++ - A Protection type IP65 Protection class II Dimensions L=160*W=182*H=160 mmFor further information please refer to the data sheet in the Download-tab.On request:Furthermore, it is possible to extend the wall external light K3-Power with the following accessories.  Description Article number Articulated bracket Z-BK3POWER Spike S-K3POWER Anti-dazzling flanged louvers Z-AK3POWER Stainless steel plate A-K3POWER

LED Wall Light K3-Writer for unlimited creativity The new K3 Writer has been created to allow the maximum creative freedom. Three casings, each with a 70 ° light distribution, one opening in all directions adjustable, or two opposite openings 45 ° up / down and right / left adjustable, or with 4 openings. Combinable with 2 converging lenses, 2 thin masks (gobos) and 4 different coloured filters ,which allow allow innumerable light and color effects to accentuate architectural details on buildings. Special attention is paid to the construction of aluminium or stainless steel  AISI 316L, the milled tempered glass in line with the frame border and on installation and adjustment friendly handling. With protection class II and IP65 the luminaires are suitable to to orient the fixture to any direction and install on any type of surface (wall, ceiling, floor) . To increase the wallwasher effect, the LED can be adjusted by 10 ° to the wall. General features: Optical lenses and shaping discs for every light emission to create special effects Ceiling and wall mounting, in the garden also floor mounting Rear cable entry LED with 50,000 h lifetime and max. Lumen drop of 30% Built-in driver Manufactured in compliance with European standards EN 60598-1:2015 Version with 3000K or 4000K Technical Data: Light up with LED LED LED Quantity lamps 1 2 4 System power 6,4 W 12,8 W 25,6 W Beam angle 70° 70°- 70° 4x70° Operating current 500 mA Connection voltage 230V Colour rendering index CRI > 85 Mechanical load IK08 Energy efficacy A++ - A Protection type IP65 Protection class II Dimensions L=160*B=182*H=160 mm For further information please refer to the data sheet in the Download-tab.

LED wall light for architectural lighting design The version with transparent ultra-white glass shades and adjustable asymmetrical parabolic reflectors emits a direct, sharp and incisive light. It is quite simple to adjust the reflector: adjustment can be made even if the light is on. Unscrew, lift the reflector, turn 180° and screw. This allows the light to be applied to the wall, with the wall-washer effect accentuated, or outwards e.g. be directed to the illumination of sidewalks. General features: Opal glass and linear LED module Clear glass and Power LED Rear cable entry Surface treatment of aluminium: pickling+ phosphorus chromate + epoxy coating + varnish with UV-stabilized epoxy powde Housing colours white, graphite grey and metal grey Protection type: IP65 Protection class: I Built-in electronic power supply Technical data: Light up with Linear LED module Power-LED Quantity lamps 1 2 1 2 System power 9,3 W 9,5 W Colour temperature 3000K / 4000K 3000K / 4000K Operating current 500mA 350mA Luminous flux 513 lm 1026 lm 930 lm 1860 lm Connection voltage 230 V Colour rendering index CRI >80 System efficacy 55 lm/W 98 lm/W Energy efficacy A++ - A Mechanical load IK08 Protection type IP65 Protection class I Dimensions L=222*W=116*H=100 mm Weight 2,148 kg For further information please refer to the data sheet in the Download-tab.

LED wall light for architectural lighting design The version with transparent ultra-white glass shades and adjustable asymmetrical parabolic reflectors emits a direct, sharp and incisive light. It is quite simple to adjust the reflector: adjustment can be made even if the light is on. Unscrew, lift the reflector, turn 180° and screw. This allows the light to be applied to the wall, with the wall-washer effect accentuated, or outwards e.g. be directed to the illumination of sidewalks. General features: Opal glass and linear LED module Clear glass and Power LED Rear cable entry Surface treatment of aluminium: pickling+ phosphorus chromate + epoxy coating + varnish with UV-stabilized epoxy powder Housing colours white, graphite grey and metal grey Protection type: IP65 Protection class: I Built-in electronic power supply Technical data: Light up with Linear LED module Power-LED Quantity lamps 1 2 1 2 System power 9,3 W 9,5 W Colour temperature 3000K / 4000K 3000K / 4000K Operating current 500mA 350mA Luminous flux 513 lm 1394 lm 930 lm 1860 lm Connection voltage 230 V Colour rendering index CRI >80 System efficacy 55 lm/W 75 lm/W 98 lm/W Energy efficacy A++ - A Mechanical load IK08 Protection type IP65 Protection class I Dimensions L=222*W=116*H=100 mm Weight 2,02 kg For further information please refer to the data sheet in the Download-tab.

LED Outdoor wall light Wash52 curved The milled opal glass screens create a soft, comfortable light. To prevent water build-up on the surface of the wall light, the glass shade is flush mounted with the frame. The latest-generation LED light sources ensure high luminous efficacy and a long durability General features: Opal glass and linear LED module Marine die-cast aluminium alloy housing Rear cable entry Protection type: IP65 Protection class I Housing colours white, graphite grey and metal grey Colour temperature 3000K and 4000K Built-in electronic power supply Technical data: Light up with Lineares LED-Modul Quantity lamps 1 2 System power 11W Colour temperature 3000K / 4000K 3000K / 4000K Operating current 700mA Luminous flux 698 lm 1394 lm System efficacy 63 lm/W Colour rendering index CRI >80 Energiy efficacy A++ - A Mechanical load IK08 Protection type IP65 Protection class I Lifespan L80 B20; 60.000 h Dimensions L=530*B=81*H=70 mm Weight 2,272 kg For further information please refer to the data sheet in the Download-tab.

Elegant wall mounted luminaire with IP65With this outdoor wall mounted luminaire, the beam angle can be adjusted individually between 15 ° and 120 °. The housing is made of die-cast aluminium.  Further features: 2 light emissions directed upwards and downwards Protection type: IP65 Protection class: 1 Built-in electronic power supply Technical data: System power 10 W Luminous flux 499 lm Colour temperature 3000K Colour rendering index CRI >80 Beam angle 15°-120° System efficacy 50 lm/W Operating current 230 V Energy efficacy A++ - A Weight 0,649 kg Dimensions L=120*W=97*H=100 mmFor further information please refer to the data sheet in the Download tab.

Dimmable LED wall mounted luminaire METOO 14W 3000K - aluminium housing, IP65 This elegant wall-mounted luminaire convinces with its high degree of protection and its flexibility due to the possibility of trailing edge dimming. It has a sturdy housing made of die-cast aluminum and can be operated with a supply voltage of 220V to 240V. The warm white LED light is available with matching electronic power supply in three variations - with aluminum grey, anthracite and beige case colour. Overview: LED wall mounted luminaire with die-cast aluminum housing Light emission is directed on both sides, optimal illumination Dimmable via trailing edge dimming Good colour rendering index (CRI > 80) Protection type: IP65 and protection class:1 Incl. electronic power supply   Technical data:  Housing colour Aluminium grey Anthracite Beige Article number MET-14WW7 MET-14WW6 MET-14WW08 Light up with LED System power 14 W Luminous flux 652 lm Colour temperature 3000 K Colour rendering index (CRI) > 80 Connection voltage 220-240 V System efficacy 47 lm/W Energy efficacy A++ - A Protection class 1 Test certificates CE Colour metallized grey graphite Ibiza Sand Material  die-cast aluminium Version Light emission directed on both sides Protection type IP65 Dimensions L=220*W=100*H=50 mm For further information, please refer to the data sheet in the download tab.

Waterproof LED Outdoor light 3/6W with 1 or 2 light emissions - primary aluminium, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker. In addition, it is possible to choose between different colour temperatures and housing colorus. Overview: LED Marker light from primary aluminium Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Large-area illumination (possibly by two light emissions) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: Versionen: 1 Light emission: 3W System power, 215lm luminous flux 2 Light emissions: 6W System power, 430lm luminous flux Colour temperature 3000 K 4000 K Housing colour Graphitgrau Metallgrau Graphitgrau Metallgrau Article number (Version 1 light emission) STAMP1-3WW6 STAMP1-3WW7 STAMP1-3NW6 STAMP1-3NW7 Article number (Version 2 light emissions) STAMP2-6WW6 STAMP2-6WW7 STAMP2-6NW6 STAMP2-6NW7 Light up with LED System power 3 W per light emission Luminous flux 215 lm per light emission Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V System efficacy 72 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechanical load IK10 Material Primary aluminium Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=120*W=120*H=25,5 mm For further information please refer to the data sheet in the download tab.

Universal LED outdoor light 4,5W/10W as mounted module - adjustable optics, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board).The function of STAMP as a marker light is underlined by the possibility to adjust the inclination of the optics (+ 13° or + 18°). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker This LED outdoor light is available in a version with 4.5W and 10W and in different colour temperatures and housing colours. The 10W module can also be operated with 500mA constant current. On request, a dimming function by an external button is possible. Overview: LED Marker light from primary aluminium Adjustable optics by 13° / 18° integrated Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: System power 4,50 W 10 W Colour temperature 3000 K 3000 K 4000 K 4000 K Housing colour Graphite Metallized grey Graphite Metallized grey Article number STAMPE-4WW6 STAMPE-4WW7 STAMPE-10WW6 STAMPE-10WW7 STAMPE-4NW6 STAMPE-4NW7 STAMPE-10NW6 STAMPE-10NW7 Light up with LED Luminous flux 300 lm 800 lm Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V Operating current / 500 mA System efficacy 67 lm/W 80 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechnical load IK10 Material Primary aluminium Version adjustable optics +13° adjustable optics +18° Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=110*W=110*H=25 mm L=175*W=175*H=30 mm For further information please refer to the data sheet in the download tab.

Flexible LED outdoor light 4,5W/10W as mounted module - adjustable optics, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board).The function of STAMP as a marker light is underlined by the possibility to adjust the inclination of the optics (+ 13° or + 18°). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker This LED outdoor light is available in a version with 4.5W and 10W and in different color temperatures and housing colors. The 10W module can also be operated with 500mA constant current. On request, a dimming function by an external button is possible. Overview: LED Marker light from primary aluminium Adjustable optics by 13° / 18° integrated Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: System power 4,50 W 10 W Colour temperature 3000 K 3000 K 4000 K 4000 K Housing colour Graphite Metallized grey Graphite Metallized grey Article number STAMPA-4WW6 STAMPA-4WW7 STAMPA-10WW6 STAMPA-10WW7 STAMPA-4NW6 STAMPA-4NW7 STAMPA-10NW6 STAMPA-10NW7 Light up with LED Luminous flux 300 lm 800 lm Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V Operating current / 500 mA System efficacy 67 lm/W 80 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechnical load IK10 Material Primary aluminium Version adjustable optics +13° adjustable optics +18° Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=110*W=110*H=25 mm L=175*W=175*H=30 mm For further information please refer to the data sheet in the download tab.