LED driver with Casambi inside - TCI Professional Casambi

Casambi Xpress | Universal and elegant wall switch and Bluetooth transmitter his wireless control unit brings maximum flexibility in terms of design and function. Without any wiring, you can control your Casambi mesh network and thus the luminaires connected to it from anywhere in the room. The four buttons of the Casambi Xpress wall switch can be configured as desired using the Casambi app. Entire DALI groups can be assigned accordingly and thus dimmed or switched. The principle is familiar. Short tap on "Up" --> associated luminaire or luminaire group is switched on, or switched off when tapping on "Down". If the respective button is held, the light can be dimmed up or down. In connection with Tuneable White control of e.g. a 2-channel Casambi module with matching luminaire, the color temperature can also be changed slowly or by longer holding in 25Kelvin steps. Depending on the programming, you can thus conveniently control separate and indirect lighting with the Casambi Xpress wall switch. Figure 2 shows corresponding assignment options that can be programmed with the Casambi App e.g. for IOS or also Casmbi for Android. Functions of the Xpress as a wall switch or universal remote control in overview: Control of individual lights Control of groups Overall control of all connected lights Call of scenes Call of animations Smooth dimming Changing the color temperature Changing the ratio of direct to indirect light The respective implementation depends on programming and the configuration used on luminaires and Casambi receiver modules (e.g. DALI, or 1-10V, or phase dimming). Mounting Casambi Xpress According to Figure 3, there is a wall mounting plate with built-in magnet. This allows the switch module to be used as a wall-mounted control unit or also as a mobile remote control. Technical data: Dimensions: 90 x 90 x 12mm Battery: CR2430 Lithium-Ion (operating time approx. 2-5 years, depending on usage) Range: up to 60m (without obstacles) Available in white or black Here you can download the app for free: Casambi App in Appstore Casambi App for Android

Casambi Push Button Interface for flush boxThis Casambi push button interface can be easily installed behind any push button to send Bluetooth signal to the Casambi network. As known from the Casambi Xpress the Casambi push button interface can be setup by Casambi app and controls according the programmed buttons (1-4) the whole network.After installation, just start the app and the Casambi Push Button interface pops up in the app and can be configured very simple. In case the details are described in manual.Everybody who disliked the controlling by switching sequences or wants to have unique design for wallswitches, this Casambi switching interface is the ultimate solution.  Technical Data of Casambi Push Button Interface SC-TI-CAS Power supply 230VAC, 50Hz Power consumption max. 10mA Cable length of button connections max. 30cm Ambient temperature 0 - 55°C Applied standards DIN EN 60669-2-1ETSI EN 301 489-1 v.1.9.2ETSI EN 301 489-17 v.2.2.1ETSI EN 300 328 v.1.8.1NOTE!The connected pushbuttons and their wiring must be insulated for the maximum supply voltage of the push button interface and ensure the appropriate contact protection after proper installation.   Dimensions Ø 53mm x 21mm

TCI Professional Casambi (#127630 / #127631) TCI PROFESSIONALE is the new generation of LED drivers by manufacturer TCI. These are characterized by: Elongated, small design Emergency power very small ripple of <3% 16 different current levels adjustable via dip-switch (from 300mA up to 1050mA) High performance and very good efficiency (> 90%) Opposite input and output terminals Available in IP20 housing or as built-in version Protection against overheating, voltage peaks and overload High tcof 80°C Active Power Factor Correction (PF = 0.95) Large voltage range (for approx. 3 - 16 LEDs) Thus, this driver series is the right choice for many LED applications up to 38W (current dependent). The special feature of this constant current driver: In addition to the integrated CASAMBI radio receiver, this EVG has amplitude tuning and enjoys absolutely flicker-free light. (No PWM). The dimming range is between 1% - 100%. TCI Professionale Casambi (127630) IP20 housing 146.5 x 44 x 30mm (L x W x H) Protection class II Independent driver for the interior Strain relief on primary and secondary circuits for cables with a diameter of 2-9mm TCI Professionale Casambi (127631) Built-in version (open terminal block) 97 x 43 x 30mm (L x W x H) Suitable for lighting equipment/ luminaires. protection class I and II.   Dip-SW Power Voltage sec Current sec Position 1 16 W 10..54V 300mA const. Position 2 18,5 W 10..54V 350mA const. Position 3 21,5 W 10..54V 400mA const. Position 4 24 W 10..54V 450mA const. Position 5 27 W 10..54V 500mA const. Position 6 29,5 W 10..54V 550mA const. Position 7 32 W 10..54V 600mA const. Position 8 35 W 10..54V 650mA const. Position 9 38 W 10..51V 700mA const. Position 10 38 W 10..50V 750mA const. Position 11 38 W 10..47V 800mA const. Position 12 38 W 10..44V 850mA const. Position 13 38 W 10..42V 900mA const. Position 14 38 W 10..40V 950mA const. Position 15 38 W 10..38V 1A const. Position 16 38 W 10..36V 1,05A const. For further details for the products TCI 127630 or TCI 127631 please see the manufacturer data sheet (download tab) .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} Professionale Casambi BI - Driver BI TCI + Casambi   Video of the TCI Professionale Casambi BI - Driver BI