Linea DS-A 195 Adjustable
Product information "Linea DS-A 195 Adjustable"
Illuxtron Linea DS-A 195 Downlight
The latest generation of high performance "Chip-on-Board" (COB) LEDs.
TE Connectivity
The patented COB-LED connector ensures optimum heat dissipation through the heat sink during its entire service life.
Front protection glass
It has been proven that corrosion, smoke and dust deposits on the mirror of an LED luminaire can cause a loss of up to 50% of the light output over time. Illuxtron COB-LEDs are equipped with a front protection glass that reliably protects the LED and the reflector mirror from environmental influences and guarantees a lifetime of high performance.
3-Phase-Adapter
The Odion and Linea Track spots are equipped with a 3-phase adapter from Nordic Aluminium. The additional retaining clip on the mounting device holds the light firmly in place on the track and even allows vertical wall mounting.
Special features and characteristics
- Attractive price-performance ratio
- Various light colours, beam angles and CRI options
- Excellent thermal conductivity over the entire service life
- Latest generation of high-power „Chip on Board“ (COB)-LEDs
- Front glass protects the reflector against dust and smoke deposits
- Maximum temperature of the body under 70°C; C
- power supplies ENEC/EMC compliant
- Active power factor correction (PFC)
- Electronic components in A-brand quality
The most important technical details of the Linea DS-A 195 series:
| Housing colour |
matt white RAL 9016 (XX=MW) |
| Material | Housing: Die-cast aluminium Reflector glass: Polycarbonate |
| Dimensions | ø 140 mm |
| Required installation depth | > 109 mm |
| Ceiling cut-out |
195 mm: For soft mineral fibre ceilings we recommend the use of a wooden board or a ceiling ring on the back of the board |
| Useage | Indoors |
| Beam angle (FWHM) | 18° / 37° / 60° |
| CRI / Ra (typ.) | 80 / 97 |
| Colour Consistency (MacAdam) | SDCM3 |
| IP Code | IP20 / IP44 |
| IK Code | IK03 |
| Operating temperature (Ta) | -20°C / +45°C |
| Lifetime | at 25°C |
| L70B50 | 165.000 h |
| L80B50 | 105.000 h |
| L90B50 | 51.000 h |
| Safety signs | EN60598 / EN62031 / EN62471 |
| EMC Directive | EN55015 |
| Guarantee | 7 Jahre |
| Energy class | A+ |
Linea Linea DS-A 195
The driver is already available for this downlight.
For further information on Linea DS-A 195 downlights, please refer to the respective data sheet.
| Dimmbarkeit |
No (*Note) | |||||
| Artikelnummer | 130603XXCA02 | 130603XXCR02 | 130603XXCG02 | 130603XXFD02 | 130603XXCD02 | 130603XXCU02 |
| Farbtemperatur | 3000 K | 4000 K | ||||
| UGR | 17,9 | 17,7 | 17,3 | 15,7 | 18,1 | 17,2 |
| Lichtstrom | 3000 lm | 5000 lm | 2500 lm | 3750 lm | 3400 lm | 5700 lm |
| Lm/W (mit EVG) | 108 | 100 | 90 | 75 | 122 | 114 |
| Typ | Inkl. PSU | |||||
| Leistung | 32,1 W | 27,0 W | 57,2 W | 50,5 W | 27,0 W | 50,5 W |
| Schutzklasse | II | |||||
| Pf | 0,95 | 0,98 | 0,95 | 0,98 | 0,95 | 0,98 |
*Note: This table shows only the switchable version with the 18° beam angle. This downlight is also available as dimmable version as DALI and 1-10V&Push, as well as different mounting options and with a beam angle of 37° or 60°.
For data sheets of the downlights Linea DS-A 195 series, see Download Tab:
Note:
The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on capacity utilisation.
| Application/IP-Code: | IP20 - IP44 (Indoor) |
|---|---|
| Color Temperature/Color: | 3000K, 4000K |
| Dimmable/Control: | 1..10V, DALI |
| Hole diameter: | 195mm |
Login
sw_similar
Fluxe 185
€123.76*
Illuxtron Fluxe 185 DownlightThese recessed spotlights are available in 3000K and 4000K. The output is between 27.0 W and 57.2 W depending on the selection. These downlights can be connected directly to 220-240V.The Fluxe downlights are among the first luminaires from Illuxtron. The series has been expanded over the years and grew with new technologies and now consists of five luminaires with different hole sizes and specifications.What makes these LED downlights so special are the reflectors with microfacets. These microfacettes of the sensor series provide perfect illumination of objects and rooms. The microfacettes were developed by the leading Bartenbach Institute for Illuxtron and result in the following remarkable benefits:
Special features of these so-called Dark Light - Reflectors
High luminous efficacy due to very good efficiency thanks to the very good reflectivity of microfacet technology
low glare values (UGR index) by avoiding unnecessary stray light
Ideal light mixing of LED light spectra for very good colour rendering The most important technical details of the Fluxe 185 Series:
Casing color
matt white RAL 9016 (XX=MW)matt black RAL 9005 (XX=BL)
Material
housing: die-cast aluminium Reflector glass: Polycarbonate
Dimensions
230 mm x 85 mm
Required installation depth
> 90 mm
Application
Inside area
Emitted beam angle (FWHM)
80°
CRI / Ra (typ.)
80 / 97(depends on version)
Colour consistency (MacAdam)
SDCM3
IP Code
IP20 / IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime
at 25°C
L70B50
189,000 h / 80,000 h (MLM)
L80B50
116,000 h / 70,000 h (MLM)
L90B50
87,000 h / 60,000 h (MLM)
Safety sign
EN60598 / EN62031 / EN62471
EMV Directive
EN55015
Guarantee
7 years
Energy class
A+
Flux 185 - HV-IC (High Voltage Integrated Circuit)
The LV downlights can be operated with a wide range of dimmers. Further details can be found in the recommendation list of the data sheet. These versions are equipped with high-quality AC LEDs and can be connected directly to 220-240V AC. Since no LED driver is required, the reliability of the lighting system is significantly improved.Properties and advantages:
directly connected to 220-240V, no LED driver required
Dimmable with a wide range of dimmers
suited for suspended ceilings, hollow ceilings and concrete ceilings
High quality "Energy Star" AC powered LEDs
diffuse, homogeneous light output
Glare-free luminaire design
Splash-proof at the front
EMV test report available
Dimmability
Switchabel (*Note)
Art. No.
821C03XXYQ02
821C03XXYR02
821C03XXYS02
821C03XXYT02
821C03XXYY02
821C03XXYZ02
Colour temperature
3000K
4000K
CRI
97
80
UGR
17,3
17,9
15,7
17,7
18,1
17,2
Luminous flux
2500 lm
3000 lm
3750 lm
5000 lm
3400 lm
5700 lm
Lm/W (with EVG)
78
111
66
99
113
126
Type
Inkl. PSU
Input
220-240 V
Power
32,1 W
27,0 W
57,2 W
27,0 W
50,5 W
Protection class
I (*Depending on version; more detailed information from the data sheet)
Powerfactor
0,95
*Note: This downlight is available in different housing colours and dimmable as 1-10V&Push and DALI. The protection class may vary depending on the version.Further information about Fluxe 185 Downlights can be found in the respective data sheet.Data sheets of downlights Fluxe 185 series see Download rider: Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.
Variants from €139.23*
Large Downlight Linea 120 LV
€78.54*
Illuxtron Linea 120 - LV (Low Voltage) Downlight
These recessed spotlights are available in 2700K, 3000K and 4000K. The power is 13.8W or 20.1W, depending on the selection, at 220-240V.
This downlight is also available in the following versions:
Version
Power range
Beam Angle
Special
HV-FD (High Voltage - Flimmerfree Dimmtechnology)
10,1-10,5W
40° / 80°
directly connected to 220-240V
LV (Low Voltage) This Version
13,8 - 20,1W
24° / 60° / 80°
CRI-97 Standard, inclusive PSU
LV-TW (Low Voltage - True White)
11,4W
60° / 80°
Tuneable White technology
What makes these LED downlights so special are the reflectors with microfacets. These microfacettes of the sensor series provide perfect illumination of objects and rooms. The microfacettes were developed by the leading Bartenbach Institute for Illuxtron and result in the following remarkable benefits:
Special features of these so-called Dark Light - Reflectors
High luminous efficacy due to very good efficiency thanks to the very good reflectivity of microfacet technology
low glare values (UGR index) by avoiding unnecessary stray light
Ideal light mixing of LED light spectra for very good colour rendering
The most important technical details of the Linea 120 Series:
Casing color
matt white RAL 9016 (XX=MW)matt black RAL 9005 (XX=BL)
Material
housing: die-cast aluminium Reflector glass: Polycarbonate
Dimensions
180 mm x 65 mm
Required installation depth
> 70 mm
Application
Inside area
Emitted beam angle (FWHM)
60°
CRI / Ra (typ.)
83
Colour consistency (MacAdam)
SDCM3
IP Code
IP20 / IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime
at 25°C
L70B50
180,000 h
L80B50
113,000 h
L90B50
54,000 h
Safety sign
EN60598 / EN62031 / EN62471
EMV Directive
EN55015
Guarantee
7 years
Energy class
A
Linea 120 - LV (Niedrigvolt)
The new CRI-97 standard is comparable to Sunlike and Xicato, but more efcient. The colour points of the LED remain on the black baseline and have been optimised according to the new TM30 standard, which includes saturation, red (R9) and skin tones.
Dimmability
Casambi (*Note)
Art.No.
895A03XX2Q02
895K03XX2Q02
895B03XX2Q02
895L03XX2Q02
895G03XX2Q02
895M03XX2Q02
895E03XX2Q02
Colour temperature
2700K
3000K
4000K
1800 - 3000K
UGR
24,0
Luminous flux
1150 lm
1625 lm
1250 lm
1800 lm
1350 lm
1925 lm
1250 lm
Lm/W (with EVG)
83
81
91
89
96
96
91
Type
Inkl. PSU
Input
220-240 V
Power
13,8 W
Protection class
II
Powerfactor
0,95
*Note: This downlight is also available with beam angles of 24° and 80°, and in a switchable, DALI, 1-10V&Push and Triac version with different mounting options.
For data sheets of the Downlight Linea 120 - LV series see Download Tab:
Note:The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This explains the longer delivery time of 1-3 weeks depending on the workload.
Variants from €88.06*
Linea 185 LV
€84.49*
Illuxtron Linea 185 LV DownlightThese recessed spotlights are available in 2700K, 3000K and 4000K, with 13.8 / 20.1W depending on the version and various dimming options, beam angles and mounting types.
This downlight is also available in the following versions:
Version
Power range
Beam Angle
Special
LV (Low Voltage) This Version
13,8 - 20,1W
24° / 60° / 80°
CRI-97 Standard, inclusive PSU
LV-TW (Low Voltage - True White)
11,4W
60° / 80°
Tuneable White technologyLow heat generationTo achieve optimum performance and longest life, the maximum junction temperature never exceeds 70°C. Under normal conditions (ambient temperature of 25°C), the highest measured temperatures were at the specified locations:
1250 Lm - 49°C
2000 Lm - 57°C
3000 Lm - 68°C
The luminaire is equipped with an integrated heat conduction system. If the electronics detect overheating, the lamp is switched off to prevent damage.The most important technical details of the Linea 185 LV Series:
Casing color
matt white RAL 9016 (XX=MW)matt black RAL 9005 (XX=BL)
Material
housing: die-cast aluminium Reflector glass: Polycarbonate
Dimensions
239 mm x 70 mm
Required installation depth
> 75 mm
Application
Inside area
beam angle (FWHM)
24° / 60° / 80°
CRI / Ra (typ.)
97
Colour consistency (MacAdam)
SDCM3
IP Code
IP20 / IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime
at 25°C
L70B50
278.800 h
L80B50
165.900 h
L90B50
66.400 h
Safety sign
EN60598 / EN62031 / EN62471
EMV Directive
EN55015
Guarantee
7 years
Energy class
A
Curion 185 - LV (low voltage)Properties and advantages:
Highest performance and highest CRI through patented TrueWhite technology from Cree
Ideal solution for lighting museums, galleries and retailers where faithful colour rendering is important
Extremely small installation depth on models with lower power
The lenses provide a uniform white appearance, whether switched on or off Curion 185 LV
Dimmability
No
Triac
DALI
Casambi
Article number
875A03XX2U02
875B03XX2U02
875A03XX2K02
875B03XX2K02
875A03XX2L02
875B03XX2L02
875A03XX2M02
875B03XX2M02
colour temperature
2700 K
3000 K
2700 K
3000 K
2700 K
3000 K
2700 K
3000 K
luminous flux
1150 lm
1250 lm
1150 lm
1250 lm
1150 lm
1250 lm
1150 lm
1250 lm
Lm/W (with EVG)
83
91
83
91
83
91
83
91
Type
Incl. PSU
Input
220-240 V
power
13,8 W
Input current
5A 50µS
Protection class
II
Pf
0,95
0,92
0,95Note: This table shows only the versions with 24° beam angle and Gyproc springs; Please refer to the data sheets for other beam angles.for other beam angles. Data sheets of the downlights Linea 185 LV-series see Download Reiter: Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.
Variants from €96.39*
Large Downlight Linea DS-F 150
€108.29*
Illuxtron Linea DS-F 150 Downlight
The latest generation of high performance chip-on-board LEDs (COB).
TE Connectivity
The patented COB-LED connector provides optimal heat dissipation through the body during its entire lifetime.
front protection glass
has been proven that corrosion, smoke and dust deposits on the mirror of an LED lamp can cause a loss of up to 50% of the light output over time. Illuxtron COB-LEDs are equipped with a front protection glass, which protects the LED and Re?ektorspiegel reliably from Umweltein? and guarantees lifetime high performance.
3-phase adapter
The Odion and Linea Track spots are equipped with a 3-phase adapter from Nordic Aluminium. The additional retaining clip on the bracket keeps the lamp firmly in place on the track and even allows vertical wall mounting.
Special features and characteristics
Attractive price-performance ratio
Various light colours, beam angles and CRI options
Excellent thermal conductivity over the entire service life
Latest generation of high-power „chip on board “ (COB) LEDs
Front glass protects the reflector against dust and smoke deposits
Maximum temperature of the refrigerated body below 70°C; C
ENEC/EMC-compliant power supplies
Active power factor correction (PFC)
Electronic components in A-brand quality
The most important technical details of the Linea DS-F 150 series:
Housing colour
matt white RAL 9016 (XX=MW) matt black RAL 9005 / Gold (XX=BL)
Material
Housing: Die-cast aluminiumReflector glass: Polycarbonate
Dimensions
ø 180 mm
Required installation depth
> 145 mm
Ceiling cut-out
160 mm: For soft mineral fibre ceilings we recommend the use of a wooden board or a ceiling ring on the back of the board 150-165 mm: For plasterboard ceilings or similar hard materials
Usage
Indoors
Beam angle (FWHM)
45° / 65°
CRI / Ra (typ.)
80 / 96
Colour Consistency (MacAdam)
SDCM3
IP Code
IP20 / IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime
bei 25°C
L70B50
165.000 h
L80B50
105.000 h
L90B50
51.000 h
Safety signs
EN60598 / EN62031 / EN62471
EMV-Directive
EN55015
Guarantee
7 Jahre
Energy class
A+
Linea DS-F 150
For further information on Linea DS-F 150 downlights, please refer to the respective data sheet.
Linea DS-F 150
Dimmability
No (*Note)
Item code
180503XXCX02
180503XXJA02
180503XXCP02
180503XXCK02
180503XXJC02
180503XXCM02
Colour temperature
3000 K
4000 K
UGR
15,6
17,4
15,0
16,4
16,0
17,8
Luminous flux
2500 lm
3000 lm
3400 lm
3750 lm
5000 lm
5700 lm
Lm/W (mit EVG)
108
100
90
75
122
114
Type
Incl. PSU
Input
220-240 V
Power
27,9 W
49,8 W
27,9 W
49,8 W
27,9 W
49,8 W
Protection class
II
Pf
0,95
0,98
0,95
0,98
0,95
0,98
*Note: This table shows only the switchable version with the beam angle 45°. This downlight is also available as dimmable DALI and 1-10V&Push, as well as with a beam angle of 65°.
Data sheet of the downlights Linea DS-F 150 series see download tab:
Note:
The products of the manufacturer Illuxtron are manufactured individually according to your specifications. This also explains the longer delivery time of 1-3 weeks depending on the workload.
Variants from €122.57*
Linea DS-FS 120
€102.34*
Illuxtron Linea DS-FS 120 Downlight
The latest generation of high performance "Chip-on-Board" (COB) LEDs.
TE Connectivity
The patented COB-LED connector ensures optimum heat dissipation through the heat sink during its entire service life.
Front protection glass
It has been proven that corrosion, smoke and dust deposits on the mirror of an LED luminaire can cause a loss of up to 50% of the light output over time. Illuxtron COB-LEDs are equipped with a front protection glass that reliably protects the LED and the reflector mirror from environmental influences and guarantees a lifetime of high performance.
3-Phase-Adapter
The Odion and Linea Track spots are equipped with a 3-phase adapter from Nordic Aluminium. The additional retaining clip on the mounting device holds the light firmly in place on the track and even allows vertical wall mounting.
Special features and characteristics
Attractive price-performance ratio
Various light colours, beam angles and CRI options
Excellent thermal conductivity over the entire service life
Latest generation of high-power „Chip on Board“ (COB)-LEDs
Front glass protects the reflector against dust and smoke deposits
Maximum temperature of the body under 70°C; C
power supplies ENEC/EMC compliant
Active power factor correction (PFC)
Electronic components in A-brand quality
The most important technical details of the Linea DS-FS 120 series:
Housing colour
matt white RAL 9016 (XX=MW)
matt black RAL 9005 (XX=BL)
Material
Housing: Die-cast aluminium
Reflector glass: Polycarbonate
Dimensions
ø 140 mm
Required installation depth
> 109 mm
Ceiling cut-out
120 mm: For soft mineral fibre ceilings we recommend the use of a wooden board or a ceiling ring on the back of the board
120-130 mm: For plasterboard ceilings or similar hard materials
Usaga
Indoors
Beam angle (FWHM)
18° / 37° / 60°
CRI / Ra (typ.)
80 / 97
Colour Consistency (MacAdam)
SDCM3
IP Code
IP20 / IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime
at 25°C
L70B50
165.000 h
L80B50
105.000 h
L90B50
51.000 h
Safety signs
EN60598 / EN62031 / EN62471
EMC Directive
EN55015
Guarantee
7 Years
Energy class
A+
Linea DS-FS 120
The driver is already available for this downlight.
For further information on Linea DS-FS 120 downlights, please refer to the respective data sheet.
Dimmability
No (*Note)
Art.No.
282003XXCA02
282003XXCR02
282003XXCG02
282003XXFD02
282003XXCD02
282003XXCU02
Color temperature
3000 K
4000 K
UGR
17,9
17,7
17,3
15,7
18,1
17,2
Luminous flux
3000 lm
5000 lm
2500 lm
3750 lm
3400 lm
5700 lm
Lm/W (with EVG)
108
100
90
75
122
114
Version
Incl. PSU
Power
27,9 W
49,8 W
27,9 W
49,8 W
27,9 W
49,8 W
Safety Class
II
Pf
0,95
0,98
0,95
0,98
0,95
0,98
*Note: This table shows only the switchable version with the 18° beam angle. This downlight is also available as dimmable version as DALI and 1-10V&Push, as well as different mounting options and with a beam angle of 37° or 60°.
For data sheets of the downlights Linea DS-FS 120 series, see Download Tab:
Note:
The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on capacity utilisation.
Variants from €115.43*
Double-Downlight Linea DS-AT Adjustable
€259.42*
Illuxtron Linea DS-AT Downlight
The latest generation of high performance "Chip-on-Board" (COB) LEDs.
TE Connectivity
The patented COB-LED connector ensures optimum heat dissipation through the heat sink during its entire service life.
Front protection glass
It has been proven that corrosion, smoke and dust deposits on the mirror of an LED luminaire can cause a loss of up to 50% of the light output over time. Illuxtron COB-LEDs are equipped with a front protection glass that reliably protects the LED and the reflector mirror from environmental influences and guarantees a lifetime of high performance.
3-Phase-Adapter
The Odion and Linea Track spots are equipped with a 3-phase adapter from Nordic Aluminium. The additional retaining clip on the mounting device holds the light firmly in place on the track and even allows vertical wall mounting.
Special features and characteristics
Attractive price-performance ratio
Various light colours, beam angles and CRI options
Excellent thermal conductivity over the entire service life
Latest generation of high-power „Chip on Board“ (COB)-LEDs
Front glass protects the reflector against dust and smoke deposits
Maximum temperature of the body under 70°C; C
power supplies ENEC/EMC compliant
Active power factor correction (PFC)
Electronic components in A-brand quality
The most important technical details of the Linea DS-AT series:
Housing colour
matt white RAL 9016 (XX=MW)matt black RAL 9005 (XX=BL)
Material
Housing: Die-cast aluminiumReflector glass: Polycarbonate
Dimensions
235 mm x 425 mm
Required installation depth
> 130 mm
Ceiling cut-out
410 x 220 mm: For soft mineral fibre ceilings we recommend the use of a wooden board or a ceiling ring on the back of the board
Useage
Indoors
Beam angle (FWHM)
18° / 37° / 60°
CRI / Ra (typ.)
82 / 97
Colour Consistency (MacAdam)
SDCM3
IP Code
IP20 / IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime
at 25°C
L70B50
165.000 h
L80B50
105.000 h
L90B50
51.000 h
Safety signs
EN60598 / EN62031 / EN62471
EMC Directive
EN55015
Guarantee
7 Jahre
Energy class
A+
Linea Linea DS-AT
The driver is already available for this downlight.
For further information on Linea DS-AT downlights, please refer to the respective data sheet.
Dimmability
No (*Note)
Art.No.
190703XXEA02
190703XXER02
190703XXEG02
190703XXFG02
190703XXED02
190703XXEU02
Colour temperature
3000 K
4000 K
UGR
17,3
18,0
18,7
22,2
18,4
20,2
Luminous flux
2x 3000 lm
2x 5000 lm
2x 2500 lm
2x 3750 lm
2x 3400 lm
2x 5700 lm
Lm/W (with EVG)
78
111
66
99
126
113
Type
Inkl. PSU
Power
2x 32,1 W
2x 27,0 W
2x 57,2 W
2x 50,5 W
2x 27,0 W
2x 50,5 W
Protection class
II
Pf
0,95
0,98
0,95
0,98
0,95
0,98
*Note: This table shows only the switchable version with the 18° beam angle. This downlight is also available as dimmable version as DALI and 1-10V&Push, as well as different mounting options and with a beam angle of 37° or 60°.
For data sheets of the downlights Linea DS-AT series, see Download Tab:
Note:The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on capacity utilisation.
Variants from €292.74*