TCI LED driver with Casambi module for conductor rail

Universal LED power supply with integrated Casambi radio moduleThis 25W multi-LED power supply can be controlled by smartphones and tablets of the operating systems Android and iOS via Bluetooth. The free app from Casambi controls brightness, configures luminaires or networks, creates scenes and animations and automatically detects new luminaires. The power supply has an integrated antenna and does not require a gateway. Additionally  can also be operated via wall switches. Synchronisation and power extension with further power supplies (article no.: 800579) possible in master/slave mode. Signal input: Bluetooth 4.0 light, Smart devicesRadio signal: 2.4 - 2.483GHz, 4dBmControllable via existing mobile phone or any smart device, UP-Casambi switch Interface or XpressPerfect for series connection of LEDs in with constant current operation or for LED strips with operation at constant voltage of 12V or 24V.Please note that this power supply is not connected in the secondary circuit. For power extension the power supply can be synchronized as slave (max.9). Technical Data of the Casambi Multi-LED Power Supply: Operating mode 350mA 500mA 700mA 12V 24V Article number/Typ 800578 / NUBTM99-25 Input voltage 220-240V Frequency 50-60Hz Working output voltage 5 - 43V 5 - 43V 5 - 36V 12V 24V Max. Output voltage 49V 49V 49V 12V 24V Rated output current 350mA 500mA 700mA - Power output 1,8 - 15W 2,5 - 22W 3,5 - 25W 1 - 10W 3,1 - 20W Rated output voltage - 12V 24V Ambient temperature -20 - 50°C max. rated temperature 75°C Dimensions 149 x 68 x 24mmFor more information please refer to the data sheet in the Download-Tab.

TCI Professional Casambi (#127630 / #127631) TCI PROFESSIONALE is the new generation of LED drivers by manufacturer TCI. These are characterized by: Elongated, small design Emergency power very small ripple of <3% 16 different current levels adjustable via dip-switch (from 300mA up to 1050mA) High performance and very good efficiency (> 90%) Opposite input and output terminals Available in IP20 housing or as built-in version Protection against overheating, voltage peaks and overload High tcof 80°C Active Power Factor Correction (PF = 0.95) Large voltage range (for approx. 3 - 16 LEDs) Thus, this driver series is the right choice for many LED applications up to 38W (current dependent). The special feature of this constant current driver: In addition to the integrated CASAMBI radio receiver, this EVG has amplitude tuning and enjoys absolutely flicker-free light. (No PWM). The dimming range is between 1% - 100%. TCI Professionale Casambi (127630) IP20 housing 146.5 x 44 x 30mm (L x W x H) Protection class II Independent driver for the interior Strain relief on primary and secondary circuits for cables with a diameter of 2-9mm TCI Professionale Casambi (127631) Built-in version (open terminal block) 97 x 43 x 30mm (L x W x H) Suitable for lighting equipment/ luminaires. protection class I and II.   Dip-SW Power Voltage sec Current sec Position 1 16 W 10..54V 300mA const. Position 2 18,5 W 10..54V 350mA const. Position 3 21,5 W 10..54V 400mA const. Position 4 24 W 10..54V 450mA const. Position 5 27 W 10..54V 500mA const. Position 6 29,5 W 10..54V 550mA const. Position 7 32 W 10..54V 600mA const. Position 8 35 W 10..54V 650mA const. Position 9 38 W 10..51V 700mA const. Position 10 38 W 10..50V 750mA const. Position 11 38 W 10..47V 800mA const. Position 12 38 W 10..44V 850mA const. Position 13 38 W 10..42V 900mA const. Position 14 38 W 10..40V 950mA const. Position 15 38 W 10..38V 1A const. Position 16 38 W 10..36V 1,05A const. For further details for the products TCI 127630 or TCI 127631 please see the manufacturer data sheet (download tab) .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} Professionale Casambi BI - Driver BI TCI + Casambi   Video of the TCI Professionale Casambi BI - Driver BI

LED driver 50W - wireless dimmable via Casambi with Dip-SwitchThis is a dircet current LED driver from TCI that is dimmable with an integrated Casambi wireless module.Selectable constant current, constant voltage via dip-switch. The dimmable LED driver can be controlled by pressing a button (push button).Switch on / off by pressing briefly. The brightness can be changed by a longer pressure. Features of the LED driver: Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless Casambi module. IP20 independent driver, for indoor use Class II protection against electric shock for direct or indirect contact. Active Power Factor Correct Analogical input (NTC) for thermal sensor connect Auxiliary output 12 V max. 100 m Current regulation ±5 % including temperature variation Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13) Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm. Protections: against overheating and short circuits; against mains voltage spikes against overloads. Thermal protection = C.5.a. Flicker ( Output Ripple ) <= 3%    DIP-Switch Power Voltage out Current out Position 1 18,5W 10...53V 350mA const. Position 2 21W 10...53V 400mA const. Position 3 23,5W 10...53V 450mA const. Position 4 26,5W 10...53V 500mA const. Position 5 29W 10...53V 550mA const. Position 6 31,5W 10...53V 600mA const. Position 7 34,5W 10...53V 650mA const. Position 8 37W 10...53V 700mA const. Position 9 39,5W 10...53V 750mA const. Position 10 42W 10...53V 800mA const. Position 11 45W 10...53V 850mA const. Position 12 47,5W 10...53V 900mA const. Position 13 50W 10...52V 950mA const. Position 14 50W 10...50V 1A const Position 15 50W 10...48V 1,05A const. Position16 50W 10...45V 1,1A const. Position 17 50W 10...43V 1,15A const. Position 18 50W 10...41V 1,2A const.Efficiency as a function of power: >92  Operation mode: Light regulation 0/0,5 - 100 % by means of PUSH function and APP or compatible devices for CASAMBI integrated WIRELESS module Light regulation 0/0,5 - 100 % by means of PUSH function (mains voltage): A short push to turn on and of; A longer push to increase or decrease light intensity; Regulation automatically stops at minimum and maximum values For another on, regulation or off command, release the push button and give the desired command again; Dimming level memory at mains restore. Possibility to use PUSH function to 4/5 driver. More information regarding the TCI Maxi Jolly SV Casambi can be found in the data sheet in the Dowload tab.

LED driver 60W - wirelessly dimmable via Casambi with dip-switchThis is a DC LED driver from TCI that is dimmable with an integrated Casambi wireless module.Selectable constant current, constant voltage via dip switch. The dimmable LED driver can be controlled by pressing a button (push button).Switch on / off by pressing briefly. The brightness can be changed by a longer pressure. Features of the LED driver: Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless CASAMBI modul IP20 independent driver, for indoor Class II protection against electric shock for direct or indirect contact Active Power Factor Corrector Analogical input (NTC) for thermal sensor connection Auxiliary output 12 V max. 100 mA Current regulation ±5 % including temperature variations Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13) Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm Protections: against overheating and short circuits against mains voltage spikes against overloads Thermal protection = C.5.a Flicker ( Output Ripple ) <= 3% DIP-Switch Power Voltage out Current out Position 1 25W 2...74 350mA const. Position 2 35W 2...72 500mA const. Position 3 39W 2...72 550mA const. Position 4 46W 2...72 650mA const. Position 5 50W 2...72 700mA const. Position 6 54W 2...72 750mA const. Position 7 60W 2...70 850mA const. Position 8 60W 2...66 900mA const. Position 9 60W 2...60 1,00A const. Position 10 60W 2...57 1,05A const.Efficiency as a function of power:> 92   Operation mode: Light regulation 0/0,5 - 100 % by means of PUSH function a APP or compatible devices for CASAMBI integrated WIRELESS module Light regulation 0/0,5 - 100 % by means of PUSH function (mains voltage): A short push to turn on and off; A longer push to increase or decrease light intensity; Regulation automatically stops at minimum and maximum value; For another on, regulation or off command, release the push button and give the desired command again; Dimming level memory at mains restore Possibility to use PUSH function to 4/5 drivers. Check signal level when close to metal surfaces or inside metal box. More information regarding the TCI Maxi Jolly US Casambi can be found in the data sheet in the Dowload tab.