TCI MINI MD LP
Product information "TCI MINI MD LP"
TCI MINI MD LP
An electronic LED converter to supply constant current and double input terminals for grinding other drivers. Equipped with an active energy factor corrector. Current regulation ±8% including temperature fluctuations. Input and output terminals on the same side (wire cross-section up to 1. 5 mm2 / AWG15). - Clamping screws on primary and secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm.
- Rated Voltage: 220 - 240 V
- Frequency: 50-60 Hz
- AC Operation range: 198 - 264 V
- Power: 8 - 20 W
Technische Daten
| Article | Code | P out W | V out DC | I out DC | U out V | ta °C | tc °C | max Power Factor | max. Effiziency |
| Konstanter Stromausgang | |||||||||
| MINI MD 250 LP | 127444 | 12,5 | 25...50 | 250 mA | 59 | -25...+50 | 70 | 0,95 | > 89 |
| MINI MD 350 LP | 127445 | 18 | 25...51 | 350 mA | 59 | -25...+50 | 70 | 0,95 | > 89 |
| MINI MD 500 LP | 127446 | 20 | 16...40 | 500 mA | 50 | -25...+45 | 75 | 0,95 | > 89 |
| MINI MD 700 LP | 127447 | 20 | 16...28 | 700 mA | 50 | -25...+45 | 75 | 0,95 | > 88 |
| Application/IP-Code: | IP20 - IP44 (Indoor) |
|---|---|
| Constant Current: | 0,5A, 0,7A, 0,25A, 0,35A |
| Dimmable/Control: | Linear/AM, Phase-Cut (Triac) |
| Power range: | 5 - 20 W |
Login
sw_similar
TCI driver Mini MD / Mini MD BI
€24.79*
TCI MINI MD and MINI MD BI LED-driver with leading edge/trailing edge dimming
Very small constant current driver
Constant current driver available with different output currents
Driver for indoor use, degree of protection: IP20
Protection class: II (protection against direct or indirect contact) - MINI MD versions
Protection class: I and II - versions MINI MD BI
Protection against overheating and short, voltage peaks and overload.
8 variants with 250 mA, 350 mA, 500 mA and 700 mA each available as MINI MD or MINI MD BI (built-in version).
The special feature of this constant current driver is amplitude dimming (linear, non PWM) for the LED current. That is a very impressive feature for phase dimming drivers and creates flickerfree light. Also usable for Dim2warm LEDs.
The TCI MINI MD and TCI MINI MD BI are driver with leading edge/trailing edge dimming.
Typ
MD250 (BI)
MD350 (BI)
MD500 (BI)
MD700 (BI)
Partnumber
127036 (127037)
127030 (127031)
127032 (127033)
127034 (127035)
Power
12,5 W
18W
21W
20W
Output coltage
25-50 VDC
25-51 VDC
16-42 VDC
16-28 VDC
Output current
250 mA
350 mA
500 mA
700 mA
Max. output voltage
59 VDC
59VDC
50VDC
50VDC
For more information please refer to the data sheet in the Download Tab.
MiniJolly MD 20
€30.33*
TCI DC MiniJolly MD; universal dimmable LED converter
Multi current-multi voltage converter- universally applicable.
The dimmable LED converter is controllable via conventional dimmer (Phase-fired controller)
Flicker (Output Ripple) < 3%
TCI 127557/127556 20 watt selectable constant current, constant voltage via dip-switch.
Dip-SW
Power out
Voltage out
Current out
# LED
Position 1
12 W
15...48 V
250mA const.
max 13
Position 2
14 W
15...48 V
300mA const
max 13
Position 3
17 W
10...48 V
350mA const
max 13
Position 4
19 W
5...48 V
400mA const
max 12
Position 5
20 W
5...44 V
450mA const
max 12
Position 6
20 W
5...40 V
500mA const
max 11
Position 7
20W
5...36 V
550mA const
max 10
Position 8
20 W
5...33 V
600mA const
max 9
Position 9
20 W
5...31 V
650mA const
max 8
Position 10
20 W
5...29 V
700mA const
max 8
Position 11
20 W
5...27 V
750mA const
max 7
Position 12
20 W
5...25 V
800mA const
max 7
Position 13
20 W
5...23 V
850mA const
max 6
Position 14
20 W
5...22 V
900mA const
max 6
Position 15
11 W
12 V constant
900mA max
-
Position 16
20 W
24 V constant
830mA max
-
Efficiency as a function of power: > 88%
Features for TCI MiniJolly MD 20
Multipower driver supplied with dip-switch for the selection of the output current.
IP20 independent driver, for indoor use (DC MiniJolly MD).
Class II protection against electric shock for direct or indirect contact (DC MiniJolly MD).
Driver for built-in use (DC MiniJolly MD BI).
It can be used for lighting equipment in protection class I and II (DC MiniJolly MD BI).
Active Power Factor Corrector.
Current regulation ±5 % including temperature variations.
Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm²/ AWG15).
Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (DC MiniJolly MD).
Protections:
against overheating and short circuits;
against mains voltage spikes;
against overloads.
Thermal protection = C.5.a
Button and installation materials are not included in delivery.
For detailed description of dimmable LED converter please refer to the data sheet.