TCI Professionale ZB3
Product information "TCI Professionale ZB3"
Direct current dimmable electronic drivers with DIP-SWITCH #127490, #127492
Features of Professionale DALI 38
- Multipower driver supplied with dip-switch for the selection of the output current.
- IP20 independent driver, for indoor use (PROFESSIONALE DALI).
- Class II protection against electric shock for direct or indirect contact (PROFESSIONALE DALI).
- Driver for built-in use (PROFESSIONALE DALI BI).
- It can be used for lighting equipment in protection class I and II (PROFESSIONALE DALI BI).
- Active Power Factor Corrector.
- Current regulation ±5 % including temperature variations.
- Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
- Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 9 mm
- (PROFESSIONALE DALI).
- Driver can be secured with slot for screws.
- Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
- Thermal protection = C.5.a.
Operation Mode
- Features DALI dimming (0/1 - 100 %):
- memory function for sets or light groups;
- recall of stored functions;
- compatible with standard DALI interfaces.
- DALI dimming is the default setting ((3) DALI 2.0 ready)
- Light regulation 0/1 - 100 % by means of PUSH SWITCH function (mains voltage):
- a short push to turn on and off;
- a longer push to increase or decrease light intensity;
- regulation automatically stops at minimum and maximum values;
- for another on, regulation or off command, release the push button and give the desired command again;
- dimming level memory at mains restore;
- keep enabled the SWITCH for at least 10 seconds to reset the dimming level to 30%;
- keep enabled the SWITCH for at least 60 seconds to enable
Characteristics of this constant current driver:Beside of a DALI-Interface, which also can be used for Push dimming (see following picture), this EVG is designed for amplitude dimming. It creates totally flickerfree light (none PWM). The dimming sector is between 1% -100%.
BILEVEL N function:
- keep pressed for 100% level;
- FADE OFF time is 30 seconds, light level 10%;
- PROLONG time is 30 minutes, then OFF.
Wiring diagram:
| Dip-SW | Power | Voltage out DC | Current out DC |
| Position 1 | 16 W | 10..54V | 300mA const. |
| Position 2 | 18 W | 10..54V | 350mA const. |
| Position 3 | 21 W | 10..54V | 400mA const. |
| Position 4 | 24 W | 10..54V | 450mA const. |
| Position 5 | 27 W | 10..54V | 500mA const. |
| Position 6 | 29 W | 10..54V | 550mA const. |
| Position 7 | 32 W | 10..54V | 600mA const. |
| Position 8 | 35 W | 10..54V | 650mA const. |
| Position 9 | 38 W | 10..54V | 700mA const. |
| Position 10 | 38 W | 10..51V | 750mA const. |
| Position 11 | 38 W | 10..48V | 800mA const. |
| Position 12 | 38 W | 10..45V | 850mA const. |
| Position 13 | 38 W | 10..43V | 900mA const. |
| Position 14 | 38 W | 10..40V | 950mA const. |
| Position 15 | 38 W | 10..38V | 1A const. |
| Position 16 | 38 W | 10..36V | 1,05A const. |
For more details to TCI 127490 and TCI 127492 download the datasheet (see download-tab)
| #Kategoriefilter: | LED-Treiber-alles mit CC |
|---|---|
| Application/IP-Code: | IP20 - IP44 (Indoor) |
| Constant Current: | 0,3A, 0,4A, 0,5A, 0,6A, 0,7A, 0,8A, 0,9A, 0,35A, 0,45A, 0,55A, 0,65A, 0,75A, 0,85A, 0,95A, 1,0A, 1,05A |
| Dimmable/Control: | Linear/AM, Push-Button, Zigbee |
| Power range: | 5 - 20 W, 20 - 50 W |
Login
2 March 2021 07:26
Super Beratung
28 January 2021 02:29
n/a