BRICK - Linear track light

Product information "BRICK - Linear track light"

ALS Brick - LED linear light with adapter

For mounting on 3-phase power rails. The lamp is available in white or black and offers the two most common light colors with 3,000k and 4,000k. Ballasts from well-known manufacturers such as Osram, Philips and Tridonic are installed. There are differences in performance, where a maximum of more than 8,000 lumens are achieved, and in the beam angle, where a distinction is made between medium-wide beam (30°), double asymmetric beam (60°) and wide beam (90°). Areas of application can be found in basic lighting in retail, in foyers or in rooms with higher ceilings. The efficient chip on board technology (COB) is also used here.

More technical data

Luminaire type	LED 3-phase linear light
Manufacturer	ALS
Product name	Brick
Type Series	-
LED Type	COB LED
Lifetime	40,000h
Mounting	3-phase adapter
Cooling	Passive
Agility	rigid
Material	Die-cast aluminium, powder-coated
Power in W	40W, 60W
Performance values	4,500 - 8,050lm
System efficiency	110 - 132 lm/W
Light colors	3000k, 4000k
Color rendering	Ra > 80
Beam angle	medium wide (30°)
	wide (90°)
	double symmetric (60° wallwash)
Color	white, black
Dimmable	no
Protection class	II
degree of protection	IP 20
Dimensions of lamp head L x Ø	1150x65mm
Weight	k. A
Energy efficiency	E

On demand also available in CRI >90, housing color aluminum gray and dimmable with phase cut (trailing edge).

Please be advised:
The leakage current of each luminaire is 0,9 mA, therefore do not operate more than 10 luminaires via an RCD (Fi) circuit breaker 30 mA! For use without RCD (Fi) refer to the assembly instructions in the download tab.

For further data, please also refer to our download tab.

Application/IP-Code:	IP20 - IP44 (Indoor)
Color Temperature/Color:	3000K, 4000K
Dimmable/Control:	Phase-Cut (Triac)
Lamp shape:	Power rail
Power range:	20 - 50 W, 50 - 100 W

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

sw_similar

LED Track Spotlights BWS30

LED track spotlights This version of the BWS series is available in CoB LED module with 3 different beam angles (15°, 24°, 40° and 60°). In addition, you can choose the LED track spotlight from 4 color combinations. The housing is made of painted die-cast aluminum with clear protective glass. Data for the BWS30 track spotlight: Protection class I Supply voltage: 220-240V Integrated electronic power supply LED operating current: 700mA Eutrac®-3-phase electronic adapter CRI > 90 Energy efficiency: A++ -A Ideal for lighting food (vegetables, meat and bakery products) and is also used in shops for object lighting. In particular, due to the very good color rendering index, it is ideal for eg clothing stores. Variation-specific data of the LED track spotlight BWS30: Colour temperature 2700K 3000K 3500K 4000K Beam angle 15° 24° 40° 60° 15° 24° 40° 60° 15° 24° 40° 60° 15° 24° 40° 60° System power 26W 26W 26W 26W Luminous flux (lm) 2290 2276 2342 2315 2382 2367 2436 2408 2417 2401 2473 2443 2418 2403 3135 2445 pivotable 130° 130° 130° 130° System efficacy (lm/W) 89 88 91 90 92 92 95 93 94 93 96 95 94 93 96 95 UGR 19,35 18,45 18,80 * 19,55 18,60 18,95 * * * * * 19,65 18,70 19,05 * Dimensions (H x B) 176mm x 126mm 176mm x 126mm 176mm x 126mm 176mm x 126mm Outside diameter 79mm 79mm 79mm 79mm * Data not available yet For further information please refer to the data sheet in the Download-Tab.

Variants from €207.95*

€143.22* €163.62* (12.47% saved)

Details

TRACK DALI conductor railsystem with data-bus

Conductor railsystem for all ALS DALI track lights, with data bus Attention: Please note the compatibility of DALI spotlights with the respective track systems, as EUTRAC has changed its DALI track system (ONETRACK new, TRACK previously). Conductor rail systems are ideal for the individual lighting of your premises for gastronomy, shops, exhibitions and much more. Thanks to the integrated DALI data bus, all dimming and scene options or grouping of the track spotlights used are available. Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided. You can access all of the options offered directly via the links below and via the Recommendation tab. To simplify matters, we have created practical examples below to help you with configuration. Technical features of the track system: Extruded aluminium profile Lengths from 1m to 4m selectable Ceiling mounted or pendant installation Traffic white RAL9016 or painted coated, or silver anodized 4 copper conductors (2,5 mm²) embedded in plastics + two data conductors (DALI, DMX, 0-10 V, KNX) Pre-punched slotted holes for installation Adaption of length by sawing 220-240 V max. 3 x 16 A Protection class: 1 Test certificate: CE Weight: 1 KG/Meter Surface: Die-cast aluminum Dimensions: L=1000/2000/3000/4000mm / W=36mm / H=32 mm Large selection of connectors, feeders and mounting accessories Planning example for the DALI track: Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed At least the following are required: 1x 3 phase rail 1m --> 225-102 1x 3 phase rail 2m --> 225-202 1x Longitudinal electrical connector --> 555212062 1x End feeder with data bus --> 555212012 (depending on the orientation of the protective conductor) 1x End cap for the other side --> SCH-012172 Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus 1x 3 phase rail 1m --> 225-101N 1x 3 phase rail 2m --> 225-201N 1x 3 phase rail 4m --> 225-401N 2x Corner connector protection. inside --> 555212101N 1x DALI Central feeder --> 555252031N 2x End cap --> SCH-012171N Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)

Variants from €93.12*

€57.76*

Details