Phase control rotary dimmer
Product information "Phase control rotary dimmer"
Phase control Rotary dimmer for LED, incandescent and HV halogen lamps
- Phase angle rotary dimmer for powers of 5-100 W/VA
- Push-pull switch with soft paster
- Works absolutely noiseless
- Electronic short-circuit protection
- Flicker-free dimming by setting the basic brightness
- Screw terminals up to 2.5 mm
- No stand-by loss
- 230V AC, 50Hz
- Optionally available with cover frame (pure white - frame width 82 mm, rocker dimension 58.6 x 58.6 mm) and cover for rotary dimmer and potentiometer (pure white - rocker dimension 58.6 x 58.6 mm)
Technical specifications
| Load type | universal and LED retrofit |
| Rated capacity | 5-100 W/VA |
| LED | 3 - 35 W |
| Nominal voltage | 230 V |
| Frequency | 50 Hz |
| Method of operation | rotary / pushbutton |
| Mounting | flush |
| Method of Mounting | clamping / screw |
| Protection type | IP20 |
| Dimensions | 70x70x35 mm |
| Dimmable/Control: | Phase-Cut (Triac) |
|---|
Login
sw_similar
Phase section rotary dimmer
€47.95*
Phase section rotary dimmer for halogen and incandescent lamps
Phase section rotary dimmer for powers of 20-315 W
230 V AC, 50 Hz
For low-voltage halogen lamps (with electronic transformers) and incandescent lamps or HV halogen lamps
Dimming principle: phase section
Low noise, with temperature switch
With pressure changeover switch
Optionally available with cover frame (pure white - frame width 82 mm, rocker dimension 58.6 x 58.6 mm) and cover for rotary dimmer and potentiometer (pure white - rocker dimension 58.6 x 58.6 mm)
Technical specifications
Rated capacity
20-315W
Load type
universal
Nominal voltage
230 V
Frequency
50 Hz
Dimensions
70x70x35 mm
Diameter shaft
4 mm
Dimming principle
trailing edge
Thermal fuse
yes
Pressure-way switch
yes
Method of operation
Rotary / pushbutton
Mounting
flush
Method of Mounting
clamping / screw
Protection type
IP20Further information as well as the Manual can be found in the Download tab.