Constant Current Sources for Illuxtron LED Panels MLMC Variant
Product information "Constant Current Sources for Illuxtron LED Panels MLMC Variant"
Constant current driver for Illuxtron LED panels in MLMC version
Illuxtron exclusively uses constant current drivers from renowned manufacturers. The lifetime of LED constant current drivers determines the lifetime of a luminaire system, as well as the flicker of LED luminaires.The following properties are taken into account with regard to the constant current sources at Illuxtron:
- compliance with the health standards
- suitability for photo and video
- &&overvoltage protection
- H&outer luminous efficacy thanks to ripple-free drivers
- Protection against overheating
- Adherence to EU standards
Dimmability and use of CC power supplies
The manufacturer offers various LED drivers from 350 mA to 1050 mA for operating the Illuxtron Mini Downlights. Depending on the selected power, the luminous flux (lumen output) of the connected panel is calculated. (see respective table in the luminaire description)Note: Special feature with Tuneable-White version
2 ballasts are required for operation to supply the two internal, separate LED modules and control them accordingly.
Both ballasts together must not exceed the specified total output (e.g. 48.8 watts) and must be regulated accordingly to avoid overheating of the LED modules. In this example this applies to all listed LED drivers from 550 mA (grey background).
Tuneable- White dimming (infinitely variable &change of the colour temperature) is only possible with dimmable drivers, with non-dimmable drivers (NoDim) only a switching on and off of the internal modules! Not suitable !
>&round overview of available LED drivers sorted by power and dimming function
nbsp;
|
mA |
W |
Lumen Output | Lumen Output (TW) | DALI | 1-10V/Push | NoDim | TRIAC | |
| 3000K | 4000K | 2700-6500K (TW) | Ripple<3% | Ripple<3% | Ripple<3% | <20% | ||
|
350 |
14.8 | 2350 | 2550 | 2350-2550 | 05CJ | 05CH | 05HA | 05CG |
|
500 |
21.6 | 3400 | 3600 | 3400-3600 | 05CJ | 05CH | 05HA | 05CG |
| 550 | 23,9 | 3700 | 3950 | 3700-3950 | 05CJ | 05CH | 05HA | 05CG |
|
700* |
31,2 | 4700 | 4950 | 4700-4950 | 05CJ | 05CH | 05HA | 05CG |
|
900 |
41,0 | 6000 | 6300 | 6000-6300 | 05CM | 05CM | 05CK | X |
| 1050** | 48,8 | 6900 | 7250 | 6900-7250 | 05CM | 05CM | 05CK | X |
** Please select the 1050mA driver in the selection, all smaller currents (900mA) are adjustable via DIP switches.
>
Further information on the constant current drivers can be found in the data sheets see Download Tabs:
| Application/IP-Code: | IP20 - IP44 (Indoor) |
|---|---|
| Color Temperature/Color: | 3000K, 4000K, Tuneable White |
| Dimmable/Control: | 1..10V, DALI, Phase-Cut (Triac), Push-Button |
Login
sw_similar
LED Panel 1195x295 Multi-Kelvin / Multi-lumen with ext. driver
€182.07*
LED Panel 1195x295Energy-saving alternative to fluorescent lampsIlluxtron's LED panels are equipped with a flat backlit diffuser. Several LED boards are arranged evenly over the entire panel housing.The LED panel series cannot be compared to standard LED panels. This series is a modern alternative to fluorescent lamps, which saves a lot of energy. The soft, homogeneously distributed light guarantees very high lighting comfort and perfect colour rendering (CRI > 80). The LEDs are installed at the rear of the housing and are therefore optimally cooled. So even after 70,000 hours of operation you will not notice any difference in light output.
Features and advantages of Illuxtron LED Panels
Casing color
matt white RAL 9016
Material
housing: metal
reflector glass: polycarbonate
Dimensions
1195x295
Height
80 mm
Application
Inside area
Emitted beam angle (FWHM)
100°
UGR (4H8H 70/50/20)
< 19
Colour consistency (MacAdam)
SDCM3
IP Code
IP20/IP44
IK Code
IK03
Operating temperature (Ta)
-20°C / +45°C
Lifetime at
25° C
L70B50
160.000 hrs.
L80B50
99.000 hrs.
L90B50
45.000 hrs.
Safety sign
EN60598 / EN62031 / EN62471
EMV Directive
EN55015
Guarantee
7 years
Energy class
A+
LED driver
Ext. (s.Table+RiderRecommendation)
Input
220V - 240V/50Hz
Protection class
I / II ;see data sheet
Performance (depending on selected driver)
14,8W - 48,8W
LED Panel 1195x295 available in different versions, depending on selected LED driverAll LED Panels 1195x295 are available with 3000K or 4000K, as well as a Tuneable-White version.Lumen output or power and dimming functions (DALI, 1-10V&Push, Tuneable-White or only switchable) can be seen in the following tables depending on the ballast to be selected. You can find the suitable drivers here.
Notes to note: Special feature with Tuneable-Whiteversion 2 ballasts are required for operation in order to supply the two internal, separate LED modules and control them accordingly.Both ballasts together must not exceed the total output of 48.8 watts and must be adjusted accordingly to avoid overheating of the LED modules. This applies to all listed LED drivers from 550 mA (grey background).Tuneable- White dimming (infinitely variable changing of the colour temperature) is only possible with dimmable drivers, with non-dimmable drivers (NoDim) it is only possible to switch the internal modules on and off! Not suitable !
Overview of available LED panels/functions with indication of the associated driver
mA
W
Lumen Output
Lumen Output (TW)
DALI
1-10V/Push
NoDim
TRIAC
3000K
4000K
2700-6500K (TW)
Ripple<3%
Ripple<3%
Ripple<3%
<20%
350
14.8
2350
2550
2350-2550
05CJ
05CH
05HA
05CG
500
21.6
3400
3600
3400-3600
05CJ
05CH
05HA
05CG
550
23,9
3700
3950
3700-3950
05CJ
05CH
05HA
05CG
700
31,2
4700
4950
4700-4950
05CJ
05CH
05HA
05CG
900
41,0
6000
6300
6000-6300
05CM
05CM
05CK
X
1050
48,8
6900
7250
6900-7250
05CM
05CM
05CK
XFor further information on the LED panels 1195x295 please refer to the data sheet in the download tab Note:The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.