STANDING LED Aluminium bollard 230V 8W

LED Recessed floor luminaire PASSUM-UP 33W from A.L.S. These recessed luminaires optimally meet the requirements for upwards or downwards illumination. The innovative technology and the variety of combinations are to be emphasized here. The recessed luminaires are corrosion-resistant and passable with exchangeable covers, which impress with their versatile installation options. The luminaire housings with LED or conventional lamps can be swiveled or adjusted, thus allowing the inclination of the light for perfect illumination of the surfaces. Features of the PASSUM-UP series: Structure: Luminaire housing made of primary aluminum with reduced copper content, painted with anti-corrosive polyester powder after phosphorus chromating Tempered, transparent glass T = 40 ° C; Thickness from 6 to 12 mm and max. Load of 2,000 to 3,500 kg 0.5 m floor-retractable H07RN-F cable with IP68 connection Built-in box made of stabilized technopolymer The covers are available in: round with primary aluminum with double coating; round and square made of INOX AISI 316L stainless steel with stainless steel hexagon screws Manufactured in accordance with European standards EN 60598-1: 2015 Technical data: Light source LED LED Colour temperature 3000K 4000K Beam angle 38° pivoted 25° System power 33W Connection voltage 230 V Luminous flux 1060 lm Colour rendering index CRI >80 Protection class 1 Mechanical  load IK10 passable 3500Kg Protection type IP67 Lifespan L80 B20; 60.000 h Dimension round Ø245mm INFO: incl. Luminaire housing, cover, external driver, floor-mounting box and longitudinal connector For further information please refer to the data sheet in the Download-tab.

LED Wall Light K3-Writer for unlimited creativity The new K3 Writer has been created to allow the maximum creative freedom. Three casings, each with a 70 ° light distribution, one opening in all directions adjustable, or two opposite openings 45 ° up / down and right / left adjustable, or with 4 openings. Combinable with 2 converging lenses, 2 thin masks (gobos) and 4 different coloured filters ,which allow allow innumerable light and color effects to accentuate architectural details on buildings. Special attention is paid to the construction of aluminium or stainless steel  AISI 316L, the milled tempered glass in line with the frame border and on installation and adjustment friendly handling. With protection class II and IP65 the luminaires are suitable to to orient the fixture to any direction and install on any type of surface (wall, ceiling, floor) . To increase the wallwasher effect, the LED can be adjusted by 10 ° to the wall. General features: Optical lenses and shaping discs for every light emission to create special effects Ceiling and wall mounting, in the garden also floor mounting Rear cable entry LED with 50,000 h lifetime and max. Lumen drop of 30% Built-in driver Manufactured in compliance with European standards EN 60598-1:2015 Version with 3000K or 4000K Technical Data: Light up with LED LED LED Quantity lamps 1 2 4 System power 6,4 W 12,8 W 25,6 W Beam angle 70° 70°- 70° 4x70° Operating current 500 mA Connection voltage 230V Colour rendering index CRI > 85 Mechanical load IK08 Energy efficacy A++ - A Protection type IP65 Protection class II Dimensions L=160*B=182*H=160 mm For further information please refer to the data sheet in the Download-tab.

Accessories for K3-Writer outdoor wall light For the K-3 Writer wall exterior light, there is a wide range of accessories, with which it is possible to adjust the lighting individually to your own wishes and ideas. Overview of the accessories: Lense for 1 blade Lense for 5 blades Leaf shape 30° shape Colour filter in the colours green, blue, red, orange Further information on the respective accessories can be found in the data sheets in the Download tab.

LED exterior wall light K3-Power for optimal light outputK3 Power comes with a wide range of parabolic reflectors designed on the base of a dedicated optical project and produces interesting light efficiency, until 69%. Three housings with one, two or four openings and two different light beams (20 ° and 50 °) enable the design of attractive lighting effects.The aluminum housing is available in three different colours, the discs are flush mounted with the frame. Suitable to any installation surface – wall, floor and ceiling – is absolutely waterproof and can be oriented in any direction – up, down, 45°. General features: Structure: diffuser in tempered glass, ultrawhite. Housing made of die-cast aluminum with reduced copper content or AISI 316L stainless steel. Colour-matched hexagon screws Internal optics made of polished Al 98.8 to emphasize the light beam With the additional equipment A-K3 Power the lamp is adjustable Ceiling and wall mounting, in the garden also floor mounting Rear cable entry LED with 50,000 h lifetime and max. Lumen drop of 30% Built-in driver Manufactured in compliance with European standards EN 60598-1:2015 Version with 3000K or 4000K, different housing colours and light emissions Light up with LED LED Quantity lamps 1 2 Beam angle 20° / 50° 20°-20° / 50°-50° / 20°-50° System power 9,5W 2 x 9,5W Operating current 500mA Connection voltage 230V Colour rendering index CRI > 85 Mechanical load IK08 Energy efficacy A++ - A Protection type IP65 Protection class II Dimensions L=160*W=182*H=160 mmFor further information please refer to the data sheet in the Download-tab.On request:Furthermore, it is possible to extend the wall external light K3-Power with the following accessories.  Description Article number Articulated bracket Z-BK3POWER Spike S-K3POWER Anti-dazzling flanged louvers Z-AK3POWER Stainless steel plate A-K3POWER

LED Outdoor wall light Wash42 The milled opal glass screens create a soft, comfortable light. To prevent water build-up on the surface of the wall light, the glass shade is flush mounted with the frame. The latest-generation LED light sources ensure high luminous efficacy and a long durability. General features: Opal glass and linear LED module Marine die-cast aluminium alloy housing Rear cable entry Protection type: IP65 Protection class I Housing colours white, graphite grey and metal grey Colour temperature 3000K and 4000K Built-in electronic power supply Technical: Light up with Linear LED module Quantity lamps 1 2 System power 11W Colour temperature 3000K / 4000K 3000K / 4000K Operating current 700mA Luminous flux 640 lm 1280 lm System efficacy 58 lm/W Colour rendering index CRI >80 Energy efficacy A++ - A Mechanical load IK08 Protection type IP65 Protection class I Lifespan L80 B20; 60.000 h Dimensions L=421*W=71*H=70 mm Weight 2,024 kg For further information please refer to the data sheet in the Download-tab.

Waterproof LED Outdoor light 3/6W with 1 or 2 light emissions - primary aluminium, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker. In addition, it is possible to choose between different colour temperatures and housing colorus. Overview: LED Marker light from primary aluminium Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Large-area illumination (possibly by two light emissions) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: Versionen: 1 Light emission: 3W System power, 215lm luminous flux 2 Light emissions: 6W System power, 430lm luminous flux Colour temperature 3000 K 4000 K Housing colour Graphitgrau Metallgrau Graphitgrau Metallgrau Article number (Version 1 light emission) STAMP1-3WW6 STAMP1-3WW7 STAMP1-3NW6 STAMP1-3NW7 Article number (Version 2 light emissions) STAMP2-6WW6 STAMP2-6WW7 STAMP2-6NW6 STAMP2-6NW7 Light up with LED System power 3 W per light emission Luminous flux 215 lm per light emission Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V System efficacy 72 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechanical load IK10 Material Primary aluminium Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=120*W=120*H=25,5 mm For further information please refer to the data sheet in the download tab.

Flexible LED outdoor light 4,5W/10W as mounted module - adjustable optics, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board).The function of STAMP as a marker light is underlined by the possibility to adjust the inclination of the optics (+ 13° or + 18°). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker This LED outdoor light is available in a version with 4.5W and 10W and in different color temperatures and housing colors. The 10W module can also be operated with 500mA constant current. On request, a dimming function by an external button is possible. Overview: LED Marker light from primary aluminium Adjustable optics by 13° / 18° integrated Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: System power 4,50 W 10 W Colour temperature 3000 K 3000 K 4000 K 4000 K Housing colour Graphite Metallized grey Graphite Metallized grey Article number STAMPA-4WW6 STAMPA-4WW7 STAMPA-10WW6 STAMPA-10WW7 STAMPA-4NW6 STAMPA-4NW7 STAMPA-10NW6 STAMPA-10NW7 Light up with LED Luminous flux 300 lm 800 lm Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V Operating current 25 mA 500 mA System efficacy 67 lm/W 80 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechnical load IK10 Material Primary aluminium Version adjustable optics +13° adjustable optics +18° Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=110*W=110*H=25 mm L=175*W=175*H=30 mm For further information please refer to the data sheet in the download tab.

Universal LED outdoor light 4,5W/10W as mounted module - adjustable optics, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board).The function of STAMP as a marker light is underlined by the possibility to adjust the inclination of the optics (+ 13° or + 18°). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker This LED outdoor light is available in a version with 4.5W and 10W and in different colour temperatures and housing colours. The 10W module can also be operated with 500mA constant current. On request, a dimming function by an external button is possible. Overview: LED Marker light from primary aluminium Adjustable optics by 13° / 18° integrated Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: System power 4,50 W 10 W Colour temperature 3000 K 3000 K 4000 K 4000 K Housing colour Graphite Metallized grey Graphite Metallized grey Article number STAMPE-4WW6 STAMPE-4WW7 STAMPE-10WW6 STAMPE-10WW7 STAMPE-4NW6 STAMPE-4NW7 STAMPE-10NW6 STAMPE-10NW7 Light up with LED Luminous flux 300 lm 800 lm Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V Operating current 25 mA 500 mA System efficacy 67 lm/W 80 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechnical load IK10 Material Primary aluminium Version adjustable optics +13° adjustable optics +18° Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=110*W=110*H=25 mm L=175*W=175*H=30 mm For further information please refer to the data sheet in the download tab.