Filigree 8mm Slim RGB 24Vdc 15W / m Stripe with 120LEDs per meter
Product information "Filigree 8mm Slim RGB 24Vdc 15W / m Stripe with 120LEDs per meter"
Filigree 8mm Slim RGB 24Vdc 15W / m Stripe with 120LEDs per meter.
Easy to install thanks to double-sided, thermally conductive adhesive tape. The narrow design of only 8mm and the high population of 120 highly selected RGB LEDs allow new areas of application.
With the narrow, new PUR-LED Stripe, you will also find enough space for lighting in niches.
The LED bar can be separated every 5 cm and offers soldering points on both sides. This means that the bar can be cut to individual lengths.
Technical data
| Electrical data | |
| nominal voltage | 24 Vdc |
| nominal current | 0.63 A / m |
| nominal power | 15 W / m |
| Efficiency | 48 lm / W |
| Lighting data | |
| luminous flux | 720 lm / m |
| light color | RGB |
| color temperature | - |
| Color rendering index RA | - |
| beam angle | 120 ° |
| dimmable | yes, via PWM (see data sheet) |
| Lifespan & amp; & nbsp; Timing | |
| nominal service life | 30,000 h |
| ignition time | < 0.5 s |
| start-up time | immediately |
| Temperatures | |
| Operating temperature | 55 ° C measured at the TC point |
| Storage temperature | - 15 to +40 ° C |
| Dimensions | |
| length | 5,000 mm |
| width | 8 mm |
| height | 2 mm |
| division | 50 mm |
| LED distance | approx. 8.3 mm |
| LED space | approx. 5 mm |
Take further data from our download tab
| Amount LEDs/m: | 120 LEDs/m |
|---|---|
| Application/IP-Code: | IP20 - IP44 (Indoor) |
| Constant Voltage: | 24V |
| Lamp shape: | flexible (stripes) |
| Power/Meter: | 10-20W/m |
| rated luminous flux lm/m: | 501-1000 lm/m |
Login
sw_similar
Indoor LED Stripe 24V Dual White 168LED/m 28W/m
€49.85*
Flexible 24V LED Stripes Dual White 168 LEDs/m, CRI90 28W/m
These powerful 24V LED Stripes in dual white version are suitable for indoor applications and are ideal for effect and general lighting. With our flexible dual-white 24V LED Stripes shelves, showcases or individual pieces of furniture can be brought to bear through targeted installation. They are ideal if you want to set a specific color temperature, as each LED has a cool white and a warm white chip. This technique not only allows predefined color temperatures, but also intermediate values.
In this version, the LED strip can be combined with all of our ALU profiles, which are also used for cooling.
For a sustainable operation, please note the information on the cooling of the LED strips in the data sheet.
The most important features
The supply voltage of 24V allows a large selection of LED transformers
The beam angle of 120 ° ensures large-area illumination
The assembly density of 168 LEDs / m ensures good light distribution
With a pitch of 71mm, you can shorten the LED bar as needed
Thanks to the dual white technology, the color temperatures can be freely adjusted
Application examples:
Effect lighting of cabinets, showcases and shelves
Highlighting individual pieces of furniture through targeted lighting
Lighting of railings
Increase accessibility by illuminating stairs and other tripping hazards
Atmospheric lighting in party cellars
Indirect lighting of suspended ceilings
Many other indoor applications possible
Technical data of the 24V Dualwhite LED stripes
Type
STR-168270805
STR-1682705807
Electrical Data
Nominal voltage:
24 Vdc
24 Vdc
Nominal current:
1.16 A / m
1,16 A/m
Nominal power:
28 W / m
28 W/m
Efficiency:
92.9 lm / W
96,4 lm/W
Energy efficiency class:
G
F
Technical lighting data
Luminous flux:
approx. 2,600 lm/m combined
approx. 2,700 lm/m combined
approx. 1,120 lm / m warm whiteapprox. 1,120 lm/m warm white
approx. 1,275 lm/m warm white
approx. 1,480 lm/m neutral white
approx. 1,420 lm/m cold white
Light Color:
neutral white + warm white
cold white + warm white
Color temperature:
approx. 4,000 K neutral white
approx. 6,800 K cold white
approx. 1,900 K warm white
approx. 2,700 K warm white
Color rendering index RA:
90 neutral white + 90 warm White
90 cold white + 90 warm white
Beam angle:
120 °
120°
dimmable:
yes, via PWM (see data sheet)
yes, via PWM (see data sheet)
Lifespan & Ignition time
Nominal service life:
30,000 h
30.000 h
Ignition time:
< 0.5 s
< 0.5 s
Start-up time:
immediately
immediately
Temperatures
Operating temperature:
55 ° C measured at the TC-point
55° C measured at the TC-point
Storage temperature:
-15 to +40° C
-15 to +40°C
Dimensions
Length:
1,000 mm
1.000 mm
Width:
12 mm
12 mm
Height:
2 mm
2 mm
Division:
71 mm
71 mm
LED & nbsp; distance:
approx. 9 mm
approx. 9 mm
LED & nbsp; space:
approx. 3 mm
approx. 3 mm
For further technical information, please refer to the data sheet
In our shop you will find a large selection of matching 24V LED Transformers
Flexible 24V RGB LED Strip | 96 LEDs/m
€46.59*
Flexible 24V RGB LED strip 96 LEDs/m for indoor applicationsThese low-cost 24V RGB LED strips are suitable for indoor applications and are ideal for effect and ambient lighting. For example, our flexible 24V RGB LED strips can be used to illuminate shelves or showcases or to accentuate individual pieces of furniture through targeted installation. They are ideal if you want to set a specific color or you want to stay flexible in color. In this version, the LED strip can be combined with all of our ALU profiles, which are also used for cooling.
For a sustainable operation, please note the information on the cooling of the LED strips in the data sheet.
The most important features
The supply voltage of 24V allows a large selection of power supplies and use in the truck interior
The beam angle of 120 ° ensures large-area illumination
The assembly density of 96 LEDs / m ensures even and homogeneous light distribution
With a pitch of 62mm, you can customize the LED bar exactly to your needs
Thanks to the RGB technology, the colors can be adjusted freely
Application examples:
Effect lighting of cabinets, showcases and shelves
Highlighting individual pieces of furniture through targeted lighting
Lighting in the vehicle interior, eg for motorhomes
Increase accessibility by illuminating stairs and other tripping hazards
Atmospheric lighting in party cellars
Indirect lighting of suspended ceilings
Backlight of TV sets
Many other indoor applications possible
Specifications of the 24V RGB LED stripes
Variants
indoor, flexible
Power supply
24V DC
Luminous flux
700 lm/m
Power
21 W/m
Packing density
96 LEDs/m
Beam angle
120°
Width
12 mm
Height
2 mm
Division
62 mm
For further technical information, please refer to the data sheet.In our shop you will find a large selection of matching 24V power supplies
Flexible 24V Dual White LED Stripe | 120 LEDs/m
€70.10*
Flexible 24V LED Stripes Dual White 120 LEDs/m for Indoor Applications
These powerful 24V LED Stripes in dual white version are suitable for indoor applications and are ideal for effect and general lighting. With our flexible dual-white 24V LED Stripes shelves, showcases or individual pieces of furniture can be brought to bear through targeted installation. They are ideal if you want to set a specific color temperature, as each LED has a cool white and a warm white chip. This technique not only allows predefined color temperatures, but also intermediate values.
In this version, the LED strip can be combined with all of our ALU profiles, which are also used for cooling.
For a sustainable operation, please note the information on the cooling of the LED strips in the data sheet.
The most important features
The supply voltage of 24V allows a large selection of LED transformers
The beam angle of 120 ° ensures large-area illumination
The assembly density of 120 LEDs / m ensures good light distribution
With a pitch of 50mm, you can shorten the LED bar as needed
Thanks to the dual white technology, the color temperatures can be freely adjusted
Application examples:
Effect lighting of cabinets, showcases and shelves
Highlighting individual pieces of furniture through targeted lighting
Lighting of railings
Increase accessibility by illuminating stairs and other tripping hazards
Atmospheric lighting in party cellars
Indirect lighting of suspended ceilings
Many other indoor applications possible
Technical data
Version
Indoor, Flexibel, dual white
Power supply
24V DC
Luminous flux
1760 lm/m total
890 lm/m coldwhite
870 lm/m warmwhite
Colortemperature
6800K - coldwhite
2900K - warmwhite
Power
17 W/m
Packing density
120 LEDs/m
Beam angle
120°
Width
10 mm
Height
2 mm
Division
50 mm
For further technical information, please refer to the data sheet.
In our shop you will find a large selection of matching 24V LED Transformers