DALI Phase Dimmer from Lunatone for Loads of 3W-25W
The DALI PD module is a DALI phase dimmer with a DALI control input which is suitable for the initialisation and dimming of light sources. It is especially suitable for controlling dimmable LED lights with up to 25W, for example.
Example use: Integration of 230V~ LED lights with Edison base in the DALI system, e.g. chandeliers with 7x 3W candle lamps.
Are you looking for a phase dimmer with a DALI input for bigger loads? Then choose one suitable for loads of between 10W-300W now.
Product attributes
- Doubled connection terminals for the straightforward looping through of the DALI bus.
- For loads of 3-25W (PD)
- The minimum dim level (MIN LEVEL) can be set via DALI
- Conversion of the DALI 8-Bit ArcPower level into an appropriate phase voltage with phase angle or phase alignment
- Module for integration of 230V light sources designated as dimmable in a DALI circuit
- For example, dimming of 230V LED retrofit light source via DALI (device type 4 from firmware 3.0)
- The module represents a bus participant and is appropriately addressable
Technical data
- Supply: via DALI bus
- Typical power consumption: 6 mA
- Input: DALI
- Dimming: 1 % - 100 %
- Number of DALI addresses used: 1
- Network voltage: 230 VAC
- Phase angle / phase alignment: 0° +- 180°
- Output load range: 3 W - 25 W
- Temperature range 0 °C - 50 °C
- Dimensions (LxWxH): 59mm x 33mm x 15mm
- Use / installation: Box
- Connecting cables cross-section: 0.5 - 1.5 mm2
These versions are available with the following specifications:
Phase alignment control: 86458619-25
Universal dimmer: 86458619-25U
Application/IP-Code: | IP20 - IP44 (Indoor) |
---|---|
Dimmable/Control: | DALI, Phase-Cut (Triac) |
Login
7 April 2021 07:02
n/a
2 February 2023 07:32
n/a
11 March 2023 07:47
Lunatone
Super klein. Snel en correct geleverd aan scherpe prijs. ???