LED Track light K-FORUM 34W ZigBee/DALI DT8

LED track spotlights This version of the BWS series is available in CoB LED module with 3 different beam angles (15°, 24°, 40° and 60°). In addition, you can choose the LED track spotlight from 4 color combinations. The housing is made of painted die-cast aluminum with clear protective glass. Data for the BWS30 track spotlight: Protection class I Supply voltage: 220-240V Integrated electronic power supply LED operating current: 700mA Eutrac®-3-phase electronic adapter CRI > 90 Energy efficiency: A++ -A   Ideal for lighting food (vegetables, meat and bakery products) and is also used in shops for object lighting. In particular, due to the very good color rendering index, it is ideal for eg clothing stores. Variation-specific data of the LED track spotlight BWS30:   Colour temperature    2700K    3000K 3500K 4000K Beam angle 15° 24° 40° 60° 15° 24° 40° 60° 15° 24° 40° 60° 15° 24° 40° 60° System power 26W 26W 26W 26W Luminous flux (lm) 2290 2276 2342 2315 2382 2367 2436 2408 2417 2401 2473 2443 2418 2403 3135 2445 pivotable 130° 130° 130° 130° System efficacy (lm/W) 89 88 91 90 92 92 95 93 94 93 96 95 94 93 96 95 UGR 19,35 18,45 18,80 * 19,55 18,60 18,95 * * * * * 19,65 18,70 19,05 * Dimensions (H x B) 176mm x 126mm 176mm x 126mm    176mm x 126mm   176mm x 126mm   Outside diameter 79mm 79mm 79mm 79mm * Data not available yet For further information please refer to the data sheet in the Download-Tab.

LED track spotlights with DALI This version of the BWS30 LED track spotlight features a DALI dimming function. It can be purchased in CoB LED module with 4 different beam angles (15°, 24°, 40° and 60°). The BWS30 has a housing made of painted die-cast aluminum and a clear protective glass. This LED track spotlight is available in 4 housing colors. Data for the BWS30 DALI track spotlight: Protection class I Supply voltage: 220-240V Integrated electronic power supply LED operating current: 700mA Eutrac®-3-phase electronic adapter CRI > 90 Energy efficiency: A++ -A Attention: Is available in CRI97 on demand Ideal for lighting food (vegetables, meat and bakery products) and is also used in shops for object lighting. In particular, due to the very good color rendering index, it is ideal for eg. clothing stores. Variation-specific data of the LED track spotlight BWS30 with DALI dimming:    Colour temperature    2700K    3000K 3500K 4000K Beam angle 15° 24° 40° 60° 15° 24° 40° 60° 15° 24° 40° 60° 15° 24° 40° 60° System power 26W 26W 26W 26W Luminous flux (lm) 2290 2276 2342 2315 2382 2367 2436 2408 2417 2401 2473 2443 2418 2403 3135 2445 pivotable 130° 130° 130° 130° System efficacy (lm/W) 89 88 91 90 92 92 95 93 94 93 96 95 94 93 96 95 UGR 19,35 18,45 18,80 * 19,55 18,60 18,95 * * * * * 19,65 18,70 19,05 * Dimensions (H x B) 176mm x 126mm 176mm x 126mm    176mm x 126mm   176mm x 126mm   Outside diameter 79mm 79mm 79mm 79mm * Data not available yet For further information please refer to the data sheet in the Download-Tab.

Power-track-system for ALS track luminaires, without data bus With a track system you can illuminate your premises completely individually, whether gastronomy, shops, exhibitions and much more. Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided. You can access all of the options offered directly via the links below and via the Recommendation tab. To simplify matters, we have created various examples with a shopping list for you below. Technical features: Extruded aluminium profile Lengths from 1m to 4m selectable Ceiling mounted or pendant installation traffic white RAL 9016 or black coated, or anodized 4 copper conductors (2,5 mm²)embedded in plastics Pre-punched slotted holes for installation Adaption of length by sawing 220-240 V max. 3 x 16 A Protection class: 1 Test certificate: CE Weight: 1 KG/Meter Surface: extruded aluminium Dimensions: L=1000/2000/3000/4000mm / B=36mm / H=32 mm Large selection of connectors, feeders and mounting accessories Planning example for the TRACK ON track: Example 1: Requirement: 3m track black, surface mounting, end feed You will need at least: 1x 3 phase track 1m --> SCH-102 1x 3 phase track 2m --> SCH-202 1x longitudinal electrical connector --> SCH-112062 1x end feed  --> SCH-112012 (depending on the orientation of the protective conductor) 1x End cap for the other side --> SCH-012172 Example 2: Requirement: 2 x 90 ° arrangement of U-shape busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, surface mounting: 1x 3 phase track 1m --> SCH-101N 1x 3 phase track 2m --> SCH-201N 1x 3 phase track 4m --> SCH-401N 2x corner connector protection Inside --> SCH-112101N 1x DALI central feeder --> SCH-152031N 2x end cap --> SCH-012171N Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)

Conductor railsystem for all ALS DALI track lights, with data bus Attention: Please note the compatibility of DALI spotlights with the respective track systems, as EUTRAC has changed its DALI track system (ONETRACK new, TRACK previously). Conductor rail systems are ideal for the individual lighting of your premises for gastronomy, shops, exhibitions and much more. Thanks to the integrated DALI data bus, all dimming and scene options or grouping of the track spotlights used are available. Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided. You can access all of the options offered directly via the links below and via the Recommendation tab. To simplify matters, we have created practical examples below to help you with configuration. Technical features of the track system: Extruded aluminium profile Lengths from 1m to 4m selectable Ceiling mounted or pendant installation Traffic white RAL9016 or painted coated, or silver anodized 4 copper conductors (2,5 mm²) embedded in plastics + two data conductors (DALI, DMX, 0-10 V, KNX) Pre-punched slotted holes for installation Adaption of length by sawing 220-240 V max. 3 x 16 A Protection class: 1 Test certificate: CE Weight: 1 KG/Meter Surface: Die-cast aluminum Dimensions: L=1000/2000/3000/4000mm / W=36mm / H=32 mm Large selection of connectors, feeders and mounting accessories Planning example for the DALI track: Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed At least the following are required: 1x 3 phase rail 1m --> 225-102 1x 3 phase rail 2m --> 225-202 1x Longitudinal electrical connector --> 555212062 1x End feeder with data bus --> 555212012 (depending on the orientation of the protective conductor) 1x End cap for the other side --> SCH-012172 Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus 1x 3 phase rail 1m --> 225-101N 1x 3 phase rail 2m --> 225-201N 1x 3 phase rail 4m --> 225-401N 2x Corner connector protection. inside --> 555212101N 1x DALI Central feeder --> 555252031N 2x End cap --> SCH-012171N Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)

Highly efficient LED recessed luminaire K-SPOT FLAT 14W - DALI DT8 / ZigBee 3.0 dimmable With its flat design, this compact LED recessed luminaire is perfectly suitable for a wide variety of indoor applications. Not only does it have a high level of efficiency, it also has microcontroller-controlled LED management, including factory calibration and temperature compensation. This results in a high colour location stability. In addition to functions such as modular dimming, the uniform light distribution and soft light mixing ensure optimum flexibility in LED lighting systems. Another highlight are the innovative control options of the K-SPOT FLAT: Smart lighting control with NeoLink / ZigBee Control of complex lighting systems with DALI DT8 Product overview and features of the K-SPOT FLAT: Compact and timeless design Soft light mixing and uniform light distribution High optical efficiency due to integrated anti-glare reflectors High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration Features: Colour temperature 1,800 K – 16,000 K Modular Dimming Camera Ready LMU case with strain relief Integrated aluminium heat sink Operating temperature monitoring with automatic dimming function Installation instructions: It is a recessed luminaire with a small size, which means that only small installation depths are required (minimum installation depth 45 mm). Tool-free assembly is also possible. It is made using 2 fastening springs for 1 - 15 mm ceiling thickness. Technical data: Article number K-DL-FLAT531 K-DL-FLAT534 K-DL-FLAT831 K-DL-FLAT834 Luminous source LED-Modul (PI-LED) Operating voltage 230 VAC (inkl. externer Konverter) Power 14 W Luminous flux 880 lm Colour temperature 1800 K - 16000 K Colour rendering index (CRI) 90 Control ZigBee 3.0 DALI DT8 Dimming range 1% - 100% Housing colour white (RAL 9003)  brushed Aluminium white (RAL 9003) brushed Aluminium Protection type IP30 Protection type SKII Service lifetime L80/B10 50000 h Dimensions 95 x 95 x 45,5 mm (L * W * H) Note: The products of the manufacturer Kiteo are individually manufactured especially for you according to your specification. This also explains the longer delivery time of 1-3 weeks depending on the workload. For further information please refer to the data sheet in the Download tab.

Bright panel light K-AERA FLAT 50W - DALI DT8 or NeoLink / ZigBee or CASAMBI dimmable The use of PI-LED Edge Light modules gives this LED panel light its very flat design. By realistically reproducing the course of daylight, it follows the guiding principle "Brings the sun into the room" and is ideally suited for large indoor lighting. In particular, K-AERA FLAT offers optimal conditions for VDU workstations. A high colour location stability as well as uniform light distribution and mixing make a significant contribution to this. In addition, there is a reduced-glare microprismatic optic. Depending on the control (NeoLink / ZigBee or DALI DT8 or CASAMBI) and design, the LED light is available in different versions. Another highlight are the innovative control options of the K-AERA FLAT: Smart lighting control with NeoLink / ZigBee Control of complex lighting systems with DALI DT8 Product overview and features of the K-AERA FLAT: Ideal indoor use as wide area lighting Very flat design Improved concentration and increase in performance at the workplace due to the simulated circadian daylight sequence Functionality: Colour temperature 1,800 K to 16,000 K High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration Uniform light distribution and mixing through edge lighting Optimal conditions for the displays of work stations UGR<19 Operating temperature monitoring with automatic dimming function Direct 230V mains connection Installation instructions: Size according to the common grid dimensions Depending on the installation, the K-AREA FLAT can be used flexibly as a recessed, surface-mounted or pendant luminaire. Technical data: Luminous source LED-Modul (PI-LED) Operating voltage 230 VAC Power 50 W (@ 4000K) Luminous flux 4100 lm (@ 4000K) Colour temperature 1800 K - 16000 K Colour rendering index (CRI) 90 (@ 4000K) Control NeoLink / ZigBee CASAMBI DALI DT8 Dimming range CCT/CIE-xy 5-100% / RGB 0-100% Edge length 595 mm 620 mm 595mm 620 mm Protection type IP20 Protectopn class SKI Service lifetime L80/B10 50000 h Dimensions 595 x 595 x 50 mm (L * W * H) 620 x 620 x 50 mm (L * W * H) Note: The products of the manufacturer Kiteo are individually manufactured especially for you according to your specification. This also explains the longer delivery time of 1-3 weeks depending on the workload. For further information please refer to the data sheet in the Download tab.