DALI 3Ch constant current (CC) dimmer by Lunatone
- Every channel of the DALI constant current dimmer has its own DALI address
- Configuration and control via DALI (DT6)
- For the direct control of LED modules with current input
- The outputs are dimmable from 1% to 100%
- Different variants are available: for 350mA per channel in a small housing, further 1000mA per channel in a big housing
- Configuration via DALI cockpit and DALI USB interface
- Integrated short protection, minor loss of standby, high Degree of efficiency
- Different mode of Operation, balance&dim, Dim2Warm, SwitchDim2
Three channel versions, with 3 DALI addresses each (one address per channel)
With a collective positive pole: 89453846-350
With a collective minus pole: 89453846-350GM
Up to max. 3x 500mA output current
With a collective positive pole: 89453846-500
With a collective minus pole: 89453846-500GM
With a collective minus pole: 89453846-700GM
Other technical data:
- Output voltage range: 3V-45V (with 48V supply)
- Supply: 12VDC-48VDC resp. 56VDC
- Control input: DALI DT6, 2 push Botton accesses dor dimming without DALI
- Temperature: -15 °C - 50 °C resp. -20 °C - 60 °C
- Protection type: IP20
- Status after return: depends on the DALI settings
- Max. cross wire section: up to 2,5 mm²
- Dimensions: Check the data sheet
For further technical details please refer to the data sheet in the download tab.
Application/IP-Code: | IP20 - IP44 (Indoor) |
---|---|
Constant Current: | 0,5A, 0,7A, 0,35A, 1,0A |
Dimmable/Control: | DALI, Push-Button |
Login