Linessa 1L

Aviora FL Panels with reflector microfacetted optics Modern design with revolutionary optics The special structure of the reflector microfacettes (Bartenbach development) of the Aviora generates a radiation of 85° FWHM (corresponds to 100° FWTM), without the generation of disturbing scattered light. Normally the beam angle of a luminaire is half the highest lux value of the light beam (Full Width at Half Maximum, FWHM). This is usually accompanied by a lot of stray light outside the beam, which causes disturbing glare. For this reason, Illuxtron panels also work with beam sizes that are based on the height of the 10% lux value (half the half-width or "Full Width at Tenth Maximum", FWTM). In other words, the LED panel directs the light exactly where you want it, onto the work surface and only slightly onto the walls with a pleasant transition. This makes it possible to meet the 500 lux requirement on the work surface of a 5 x 5 metre room with only 4 x 20 watts.   Features and benefits of the Illuxtron Aviora FL Casing color matt white RAL 9016 Material housing: metal   reflector glass: polycarbonate Dimensions 595x595 (XX=33) 620x620 (XX=27) Height 21 mm Application Inside area Beam angle (FWHM/FWTM)  standard 85°/100° UGR (4H8H 70/50/20) < 19 Colour consistency (MacAdam) SDCM3 IP Code IP20 IK Code IK03 Operating temperature (Ta) -20°C / +45°C Lifetime at 25° C L70B50 134.000 hrs. L80B50 82.000 hrs. L90B50 37.000 hrs. Safety sign EN60598 / EN62031 / EN62471 EMV Directive EN55015 Guarantee 7 years Energy class A+ Type incl. LED driver Input 220V - 240V/50Hz Protection class II Ripple < 3% Performance levels 37,3 W 56 W Power factor /Pf 0,98 0,95 inrush current 5A 50µS 20A 400µS   Aviora FL 595x595 / 620x620 All Aviora LED Panels are available with either 2700-6500K, 3000K or 4000K, as well as different lumen packages or powers, as well as ballasts included in the set (dimmable via Casambi, DALI, 1-10V&Push or switchable only) overview of available Aviora FL panels with article numbers. Colour temperature 3000 K 4000 K 2700-6500 K Luminous flux 4100 lm 5350 lm 4350 lm 5650 lm 3450 lm Power 37,3 W 56,0 W 37,3 W 56,0 W 26,6 W Luminous efficacy (with EVG) 110 Lm/W 96 Lm/W 117 Lm/W 101 Lm/W 139 Lm/W Art. No. Switchable XXED03MWF202 XXEE03MWF202 XXED03MWF302 XXEE03MWF302 - 1-10V & Push XXED03MWG202 XXEE03MWG202 XXED03MWG302 XXEE03MWG302 - DALI XXED03MWH202 XXEE03MWH202 XXED03MWH302 XXEE03MWH302 XXED03MW6T02 Casambi - - - - XXED03MW6U02 For further information on the Aviora FL panels, please refer to the data sheet in the download tab. Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.

Aviora Panel with reflector microfacetted optics Modern design with revolutionary optics The special structure of the reflector microfacettes (Bartenbach development) of the Aviora generates a beam angle of 85° FWHM (corresponds to 100° FWTM), without generation of disturbing stray light. Normally the beam angle of a luminaire is half the highest lux value of the light beam (Full Width at Half Maximum, FWHM). This is usually accompanied by a lot of stray light outside the beam, which causes disturbing glare. For this reason, Illuxtron panels also work with beam sizes that are based on the height of the 10% lux value (half the half-width or "Full Width at Tenth Maximum", FWTM). In other words, the LED panel directs the light exactly where you want it, onto the work surface and only slightly onto the walls with a pleasant transition. This makes it possible to meet the 500 lux requirement on the work surface of a 5 x 5 metre room with only 4 x 20 watts.   Features and advantages of the Illuxtron Aviora Panels Casing color matt white RAL 9016 Material housing: metal   reflector glass: polycarbonate Dimensions 595 mm x 595 mm (XX=33) 620 mm x 620 mm (XX=27) Height 69,5 mm Application Inside area Beam angle (FWHM/FWTM) Standard 85°/100° UGR (4H8H 70/50/20) < 19 Colour consistency (MacAdam) SDCM3 IP Code IP20 IK Code IK03 Operating temperature (Ta) -20°C / +45°C Lifetime at 25° C L70B50 134.000 hrs. L80B50 82.000 hrs. L90B50 37.000 hrs. Safety sign EN60598 / EN62031 / EN62471 EMV Directive EN55015 Guarantee 7 years Energy class A+ Type incl. LED driver Input 220V - 240V/50Hz Protection class II Ripple < 3% Performance levels 37,3 W 56 W Power factor /Pf 0,98 0,95 inrush current 5A 50µS 20A 400µS   Aviora 595x595 / 620x620 All Aviora LED Panels are available with either 2700-6500K, 3000K or 4000K, as well as different housing Colours, lumen packages or powers, as well as ballasts included in the set (dimmable via DALI, 1-10V&Push or switchable only) Overview of available Aviora panels with article numbers. Colour temperature 3000 K 4000 K 2700-6500 K Luminous flux 4100 lm 5350 lm 4350 lm 5650 lm 3450 lm Power 37,3 W 56,0 W 37,3 W 56,0 W 26,6 W Luminous efficacy (with EVG) 110 Lm/W 96 Lm/W 117 Lm/W 101 Lm/W 139 Lm/W Art. No. Switchable XX2503MW6E02 XX2503MW6L02 XX2503MW6F02 XX2503MW6M02 - 1-10V & Push XX2503MW6A02 XX2503MW6G02 XX2503MW6B02 XX2503MW6H02 - DALI XX2503MW6C02 XX2503MW6J02 XX2503MW6D02 XX2503MW6K02 XX2503MW6P02 Casambi - - - - XX2503MW6Q02 For further information on the Aviora Panels, please refer to the data sheet in the download tab. Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.

Aviora FL 1195x295 with reflector microfacetted optics Modern design with revolutionary optics The special structure of the reflector microfacettes (Bartenbach development) of the Aviora generates a radiation of 85° FWHM (corresponds to 100° FWTM) without the generation of disturbing scattered light. Normally the beam angle of a luminaire is half the highest lux value of the light beam (Full Width at Half Maximum, FWHM). This is usually accompanied by a lot of stray light outside the beam, which causes disturbing glare. For this reason, Illuxtron panels also work with beam sizes that are based on the height of the 10% lux value (half the half-width or "Full Width at Tenth Maximum", FWTM). In other words, the LED panel directs the light exactly where you want it, onto the work surface and only slightly onto the walls with a pleasant transition. This makes it possible to meet the 500 lux requirement on the work surface of a 5 x 5 metre room with only 4 x 20 watts.   Features and benefits of the Illuxtron Aviora FL Casing color matt white RAL 9016 Material housing: metal   reflector glass: polycarbonate Dimensions 1195x295 Height 21 mm Application Inside area Beam angle (FWHM/FWTM) Standard 85°/100° UGR (4H8H 70/50/20) < 19 Colour consistency (MacAdam) SDCM3 IP Code IP20 IK Code IK03 Operating temperature (Ta) -20°C / +45°C Lifetime at 25° C L70B50 129.000 hrs. L80B50 78.000 hrs. L90B50 33.000 hrs. Safety sign EN60598 / EN62031 / EN62471 EMV Directive EN55015 Guarantee 7 years Energy class A+ Type incl. LED driver Input 220V - 240V/50Hz Protection class II Ripple < 3% Performance levels 26,6 - 56,0 W Power factor /Pf 0,9 - 0,98 inrush current 5A 50µS 20A 400µS Aviora FL 1195x295 All Aviora LED Panels are available with either 2700-6500K, 3000K or 4000K, as well as different lumen packages or powers, as well as ballasts included in the set (dimmable via DALI, 1-10V&Push or switchable only) Overview of available LED panels with part numbers. Colour temperature 3000K 4000K 2700-6500K Luminous flux 4100 lm 5350 lm 4350 lm 5650 lm 3450 lm Performance 37,3 W 56,0 W 37,3 W 56,0 W 26,6 W Luminous efficacy (with ECG) 110 Lm/W 96 Lm/W 117 Lm/W 101 Lm/W 139 Lm/W article numbers Switchable 38DH03MWF202 38DJ03MWF202 38DH03MWF302 38DJ03MWF302 - 1-10V & Push 38DH03MWG202 38DJ03MWG202 38DH03MWG302 38DJ03MWG302 - DALI 38DH03MWH202 38DJ03MWH202 38DH03MWH302 38DJ03MWH302 38DH03MW6T02 Casambi - - - - 38DH03MW6U02 For further information on the Aviora FL 1195x295, please refer to the data sheet in the download tab. There you will also find information on optionally available alternative power stages (26.6W; 29.3W and 47.5W) Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.

Illuxtron Linessa 2L Sustainability Less is more. Or in the case of Linessa: Making technical innovation affordable by clever product design. The end result is a lighting panel that only has 7 parts and no glue, screws or tape. Linessa has a very minimalist design. At the end of life it is very easy to take the product apart or implement a new LED module. In this scenario we minimize the waste of materials, keeping it as low as possible. Compare this to hazardous fluorescent lamps that need to be replaced frequently. Bartenbach Darklight Technology - UGR11 Normal diffuser panels distribute light in all directions and create a lot of glare. The Bartenbach Institute helped us to develop special reflector cups that ensure all of the light is reflected in ways that you need. Less glare in an office means less mistakes, less head aches and greater wellbeing for your employees. Best in class Lux/Watt The normal amount of lux for an office desk is around 500Lux. With the Linessa series this can be achieved with less energy. Compared to a normal diffuser LED panel of 25-40W it saves 25-40%. No Multi Shadows As soon as you try to focus light on to an object with multiple reflectors there will be an annoying multi shadow effect. By using 10 times more reflector cups than normal this effect will dissapear. Bespoke Versions The metal plate can be easily changed to different dimensions. It is even possible to integrate a sensor into the plate or air sleeves for ventilation. Less Light Pressure Existing LED reflector technology panels have low glare, but were uncomfortable to work under. By adding more reflector cups we managed to achieve the best comfort available in any LED panel on the market. The pressure from the LEDs is divided by an enormous amount of LEDs. Features and benefits • Application of Bartenbach's special Dark Light Technology with ultra-low UGR rating. • Ideal for office applications • Extremely low wattage for necessary lux level The most important technical details of the Linessa 2L series: Housing colour matt white RAL 9016 (XX=MW) Material Reflector cups: Chrome Dimensions 595 x 595 mm 620 x 620 mm 1195 x 295 mm 1720 x 112 mm Usage Indoors Colour Consistency (MacAdam) SDCM3 IP Code IP20 / IP44 IK Code IK03 Colour temperature (Ta) -20°C / +45°C Life time bei 25°C L70B50 > 100.000 h L80B50 > 100.000 h L90B50 > 54.000 h Safety signs EN60598 / EN62031 / EN62471 EMV-Directive EN55015 Guarantee 7 years Energy class A++ Linessa 2L This panel is available in the sizes 595x595 mm, 620x620 mm, 1195 x 295 mm and 1720x112 mm. For further information about Linessa 2L please see the respective data sheet. Linessa 2L Dimmability Not dimmable 1-10V&Push, DALI (*Note) DALI Casambi (*Note) Art. No. 3DXX03CHXA02 3DXX03CHXB02 3DXX03CHSJ02 Colour temperature 3000 K 4000 K 2700 - 6500 K UGR 17,0 17,2 Luminous flux 3150 lm 3300 lm Lm/W (with EVG) 132 139 CRI 83 Type Inc. connection box Input 220-240 V Power 23,8 Protection class II I Pf 0,95 0,9 *Note: This table shows only the switchable version (3000K and 4000K), and the DALI version (2700-6500K). This panel is also dimmable as DALI, Casambi and 1-10V&Push. For data sheets of the Linessa 2L-series see Download Tab: Note: The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the workload.

Illuxtron Linessa 2L (1195x295) Sustainability Less is more. Or in the case of Linessa: Making technical innovation affordable by clever product design. The end result is a lighting panel that only has 7 parts and no glue, screws or tape. Linessa has a very minimalist design. At the end of life it is very easy to take the product apart or implement a new LED module. In this scenario we minimize the waste of materials, keeping it as low as possible. Compare this to hazardous fluorescent lamps that need to be replaced frequently. Bartenbach Darklight Technology - UGR11 Normal diffuser panels distribute light in all directions and create a lot of glare. The Bartenbach Institute helped us to develop special reflector cups that ensure all of the light is reflected in ways that you need. Less glare in an office means less mistakes, less head aches and greater wellbeing for your employees. Best in class Lux/Watt The normal amount of lux for an office desk is around 500Lux. With the Linessa series this can be achieved with less energy. Compared to a normal diffuser LED panel of 25-40W it saves 25-40%. No Multi Shadows As soon as you try to focus light on to an object with multiple reflectors there will be an annoying multi shadow effect. By using 10 times more reflector cups than normal this effect will dissapear. Bespoke Versions The metal plate can be easily changed to different dimensions. It is even possible to integrate a sensor into the plate or air sleeves for ventilation. Less Light Pressure Existing LED reflector technology panels have low glare, but were uncomfortable to work under. By adding more reflector cups we managed to achieve the best comfort available in any LED panel on the market. The pressure from the LEDs is divided by an enormous amount of LEDs. Features and benefits • Application of Bartenbach's special Dark Light Technology with ultra-low UGR rating. • Ideal for office applications • Extremely low wattage for necessary lux level The most important technical details of the Linessa 2L series: Housing colour matt white RAL 9016 (XX=MW) Material Reflector cups: Chrome Dimensions 1195 x 295 mm Usage Indoors Colour Consistency (MacAdam) SDCM3 IP Code IP20 / IP44 IK Code IK03 Colour temperature (Ta) -20°C / +45°C Life time bei 25°C L70B50 > 100.000 h L80B50 > 100.000 h L90B50 > 54.000 h Safety signs EN60598 / EN62031 / EN62471 EMV-Directive EN55015 Guarantee 7 years Energy class A++ Linessa 2L This panel is available in the size 1195 x 295 mm. For further information about Linessa 2L please see the respective data sheet. Linessa 2L Dimmability Not dimmable 1-10V&Push, DALI (*Note) DALI Casambi (*Note) Art. No. 3DC403CHXA02 3DC403CHSG02 3DC403CHXB02 3DC403CHSH02 3DC403CHSJ02 Colour temperature 3000 K 4000 K 2700 - 6500 K UGR 13,8 14,9 14,0 15,1 14,0 Luminous flux 3300 lm 4550 lm 3450 lm 4750 lm 3450 lm Lm/W (with EVG) 139 135 145 141 145 CRI 83 Type Inc. connection box Input 220-240 V Power 23,8 33,6 23,8 33,6 23,8 Protection class II I II I Pf 0,95 0,9 *Note: This table shows only the switchable version (3000K and 4000K), and the DALI version (2700-6500K). This panel is also dimmable as DALI, Casambi and 1-10V&Push. For data sheets of the Linessa 2L-series see Download Tab: Note: The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the workload.

Illuxtron Linessa 2L (1720x112) Sustainability Less is more. Or in Linessa's case: making technical innovation affordable through clever product design. The end result is a light panel that consists of only 7 parts and does not need any glue, screws or tape. Linessa has a very minimalist design. At the end of its life, it is very easy to disassemble the product or implement a new LED module. In this scenario, we minimize material waste and keep it as low as possible. Compare this to common fluorescent lamps, which often need to be replaced. Bartenbach Darklight-Technology - UGR11 Normal diffuser plates spread the light in all directions and create a lot of glare. The Bartenbach Institute helped us develop special reflector shells that ensure all the light is reflected the way you need it. Less glare in a Büro means fewer mistakes, fewer headaches and more well-being for your employees. Best in class Lux/Watt The normal lux number for a Büro desk is about 500 lux. With Linessa series, this can be achieved with less energy. Compared to a normal diffuser LED panel of 25-40W, it saves 25-40%. No multiple shadows As soon as you try to focus light on an object with several reflectors, a disturbing multishadow effect occurs. If you use 10 times more reflector shells than normal, this effect disappears. Bespoke Versions The metal plate can be easily changed to different dimensions. It is even possible to integrate a sensor into the plate or air sleeves for ventilation. Less Light Pressure Existing LED reflector technology panels have low glare, but were uncomfortable to work under. By adding more reflector cups we managed to achieve the best comfort available in any LED panel on the market. The pressure from the LEDs is divided by an enormous amount of LEDs. Features and benefits - Application of Bartenbach's special Dark Light Technology with ultra-low UGR rating - Ideal for office applications - Extremely low wattage for necessary lux level The most important technical details of the Linessa 2L series: Housing colour matt white RAL 9016 (XX=MW) Material Reflector cups: Chrome Dimensions 1720 x 112 mm Usage Indoors Colour Consistency (MacAdam) SDCM3 IP Code IP20 / IP44 IK Code IK03 Colour temperature (Ta) -20°C / +45°C Life time bei 25°C L70B50 > 100.000 h L80B50 > 100.000 h L90B50 > 54.000 h Safety signs EN60598 / EN62031 / EN62471 EMV-Directive EN55015 Guarantee 7 years Energy class A++ Linessa 2L This panel is available in the size 1720 x 112 mm. For further information about Linessa 2L please see the respective data sheet. Dimmability Not dimmable1-10V&Push, DALI (*Note) DALICasambi (*Note) Art. No. 3DC503CHXA02 3DC503CHSG02 3DC503CHXB02 3DC503CHSH02 3DC503CHSJ02 Colour temperature 3000 K 4000 K 2700 - 6500 K UGR 13,8 14,9 14,0 15,1 14,0 Luminous flux 3300 lm 4550 lm 3450 lm 4750 lm 3450 lm Lm/W (with EVG) 139 135 145 141 145 CRI 83 Type Inc. connection box Input 220-240 V Power 23,8 33,6 23,8 33,6 23,8 Protection class II I II I Pf 0,95 0,9 *Note: This table shows only the switchable version (3000K and 4000K), and the DALI version (2700-6500K). This panel is also dimmable as DALI, Casambi and 1-10V&Push. For data sheets of the Linessa 2L-series see Download Tab: Note: The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the workload.

Illuxtron Linessa 3L (1720x112) Sustainability Less is more. Or in the case of Linessa: Making technical innovation affordable by clever product design. The end result is a lighting panel that only has 7 parts and no glue, screws or tape. Linessa has a very minimalist design. At the end of life it is very easy to take the product apart or implement a new LED module. In this scenario we minimize the waste of materials, keeping it as low as possible. Compare this to hazardous fluorescent lamps that need to be replaced frequently. Bartenbach Darklight Technology - UGR11 Normal diffuser panels distribute light in all directions and create a lot of glare. The Bartenbach Institute helped us to develop special reflector cups that ensure all of the light is reflected in ways that you need. Less glare in an office means less mistakes, less head aches and greater wellbeing for your employees. Best in class Lux/Watt The normal amount of lux for an office desk is around 500Lux. With the Linessa series this can be achieved with less energy. Compared to a normal diffuser LED panel of 25-40W it saves 25-40%. No Multi Shadows As soon as you try to focus light on to an object with multiple reflectors there will be an annoying multi shadow effect. By using 10 times more reflector cups than normal this effect will dissapear. Bespoke Versions The metal plate can be easily changed to different dimensions. It is even possible to integrate a sensor into the plate or air sleeves for ventilation. Less Light Pressure Existing LED reflector technology panels have low glare, but were uncomfortable to work under. By adding more reflector cups we managed to achieve the best comfort available in any LED panel on the market. The pressure from the LEDs is divided by an enormous amount of LEDs. Features and benefits • Application of Bartenbach's special Dark Light Technology with ultra-low UGR rating. • Ideal for office applications • Extremely low wattage for necessary lux level The most important technical details of the Linessa 3L series: Housing colour matt white RAL 9016 (XX=MW) Material Reflector cups: Chrome Dimensions 1720 x 112 mm Usage Indoors Colour Consistency (MacAdam) SDCM3 IP Code IP20 / IP44 IK Code IK03 Colour temperature (Ta) -20°C / +45°C Life time bei 25°C L70B50 > 100.000 h L80B50 > 100.000 h L90B50 > 54.000 h Safety signs EN60598 / EN62031 / EN62471 EMV-Directive EN55015 Guarantee 7 years Energy class A++ Linessa 3L This panel is available in the size 1720 x 112 mm. For further information about Linessa 3L please see the respective data sheet. Linessa 3L Dimmability Not dimmable 1-10V&Push, DALI (*Note) DALI Casambi (*Note) Art. No. 3DC603CHXA02 3DC603CHSG02 3DC603CHXB02 3DC603CHSH02 3DC603CHSJ02 Colour temperature 3000 K 4000 K 2700 - 6500 K UGR 15,1 16,2 15,2 16,3 15,2 Luminous flux 3500 lm 4800 lm 3650 lm 5000 lm 3650 lm Lm/W (with EVG) 147 143 153 149 153 CRI 83 Type Inc. connection box Input 220-240 V Power 23,8 33,6 23,8 33,6 23,8 Protection class II I II I Pf 0,95 0,9 *Note: This table shows only the switchable version (3000K and 4000K), and the DALI version (2700-6500K). This panel is also dimmable as DALI, Casambi and 1-10V&Push. For data sheets of the Linessa 3L-series see Download Tab: Note: The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the workload.