Rotating light switch wireless K-ZWALLY for ZigBee luminaires

LED driver 60W - wireless dimmable with Dip-SwitchThis is a direct current LED driver from TCI which is dimmable with a integrated wireless ZIGBEE module.Successor of the TCI MAXI JOLLY ZLL (122570).Selectable constant current values via dip-switch. The dimmable LED driver is controllable via button (Push-Button).On/off by a short push. Brightness can be changed by a longer push.Available as a pure AM/linear controller for flicker-free dimming in the range of 100% - 25%.  Features of the LED driver: Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless ZIGBEE module. IP20 independent driver, for indoor use. Class II protection against electric shock for direct or indirect contact. Active Power Factor Corrector. Analogical input (NTC) for thermal sensor connection. Auxiliary output 12 V max. 100 mA. Current regulation ±5 % including temperature variations. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13). Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm. Protections: Against overheating and short circuits; Against mains voltage spikes; Against overloads. Thermal protection = C.5.a. Flicker ( Output Ripple ) <= 3%    DIP-Switch Power out Voltage out Current out Position 1 25W 2...74 350mA const. Position 2 35W 2...72 500mA const. Position 3 39W 2...72 550mA const. Position 4 46W 2...72 650mA const. Position 5 50W 2...72 700mA const. Position 6 54W 2...72 750mA const. Position 7 60W 2...70 850mA const. Position 8 60W 2...66 900mA const. Position 9 60W 2...60 1,00A const. Position 10 60W 2...57 1,05A const.Efficiency as a function of power: >92  Operation Mode: Light regulation 0/1 - 100 % by means of PUSH function and standard ZIGBEE devices for ZIGBEE integrated WIRELESS module. (3) Designed to work with ZIGBEE systems. Full AM DIMMING: 1-100%. Light regulation 0/0,5 - 100 % by means of PUSH function (mains voltage): A short push to turn on and off; A longer push to increase or decrease light intensity; Regulation automatically stops at minimum and maximum values; For another on, regulation or off command, release the push button and give the desired command again; Dimming level memory at mains restore. Possibility to use PUSH function to 4/5 drivers Setup of the TCI Zigbee devices like this:Step 1: Hue-App go for "Search Luminaires"Step 2: Switch on TCI Zigbee deviceDevice should be connected within some seconds. Check signal level when close to metal surfaces or inside metal box. For more information regarding the TCI Maxi Jolly US Zigbee 3 please refer to the data sheet in the Dowload-Tab.Some hints by LEDclusive.de:We have successfully tested the TCI-Module with Philips Hue Bridge and got following experience. Just follow the setup procedure above, the device can be easy found in the setup of luminaires.In case something went wrong, we recommend running the reset procedure. This is described on the label. Take care to follow the time sequences exactly. We use one metronome for counting. Successful reset get confirmed by a short off and on of the connected LED-module.

Converter ZIGBEE ZB3 - DALI/1-10V | 122553 Mini ZB3 Interface This interface converts a WIRELESS ZIGBEE ZB3 signal into a DALI  (1) or a 0/1...10 V signal. It enables control of lighting control gear, such as switching power supplies ("electronic transformer"), electronic ballasts (ECG) or electronic power dimmers. Dimming of LED drivers via the 0-10V interface via ZIGBEE. Features Zigbee 1-10V/Dali converter: Interface, that can convert a WIRELESS ZB3 signal into a DALI or 0/1...10 V (1). Protection class II against electric shock in case of direct or indirect contact. The interface (converter) can be supplied directly from the mains (100 ÷ 240 VAC) or from a 12/24 VDC voltage. Protective measures: -against input overvoltages from the mains; -against short circuit and open circuit; - Thermal protection = C.5.a. Abmessungen 115 x 19 x 34 mm Article Article No. VAC in VDC in Type ta °C tc °C lambda max. Power Factor Mini ZB§ Interface 122553 100 ÷ 240 11,5..25 ZB3- DALI/1-10V -25...+50 65 0,5 C   Operation mode: -Developed for operation with DALI-2 systems. -DALI connection max. 1 device @ 12Vdc input. -DALI connection max. 4 device @ 24Vdc input. -0/1-10 V connection Imax. 10mA. -PWM output open collector type. -Reset: perform 3 on/off cycles of 3-5-7 seconds. The fourth time the product is turned on, it will flash to confirm the reset.. Setup of the TCI devices like this: Step 1: Hue-App go for "Search Luminaires" Step 2: Switch on TCI Zigbee device Device should be connected within some seconds. Check signal level when close to metal surfaces or inside metal box. For more information please refer to the data sheet in the Download Tab. Some hints by LEDclusive.de: We have successfully tested the TCI-Module with Philips Hue Bridge and got following experience. Just follow the setup procedure above, the device can be easy found in the setup of luminaires. In case something went wrong, we recommend running the reset procedure. This is described on the label. Take care to follow the time sequences exactly. We use one metronome for counting. Successful reset get confirmed by a short off and on of the connected LED-module. Historie (Vorgänger) Artikel 122550 --> Mini ZLL Interface  

Universal LED-surface mounted luminaire SOVT CAMPUS 35W - NeoLink/ZigBee dimmable SOVT CAMPUS labels an elegant surface mounted luminaire that comes with an integrated surface spotlight optics. SOVT CAMPUS is ideal for extensive indoor-usage and many other applications. The Installation to ceilling or wall is easy to handle. Furthermore the LED-Modul contains a "Mikroprozessor that directs temperature and light to ensure a high colour location stability. A highlight from SOVT CAMPUS is the innovative posibility of controll:  Smarte Lichtsteuerung mit NeoLink/ZigBee. On demand there is also a designe with a dimmable DALI DT8 available. Product overview and features: Elegant designed box with integrated surface spotlight optics Ideal usage for extensive indoor-Illumination. Function volume: colour temperature 1.800 K to 16.000 K Microprocessing controlled LED- and temperature menagement (with temperature compensation and factory calibration) Direct 230 VAC-connection Regular light dirstribution and smooth light mixture Installation to ceilling or wall possible Order data to SOVT CAMPUS: The luminare is available separately or as complete package including control and accessory. Menaning the package includes  Funk-Drehregler K-ZWALLY. In combination with the controller this luminare offers a variety of functional possibilites. Technical Data: Lunimous source LED-Modul (PI-LED) Operating voltage 230 VAC Power 35 W Luminous flux 1960 lm Colour temperature 1800 K - 16000 K Colour rendering index(CRI) > 90 Control NeoLink / ZigBee Dimming range CCT/CIE-xy 5-100% RGB 0-100% Protection type IP20 Protection class SKII Service lifetime L80/B10 50000 h Dimensions 385 x 385 x 69 (L*B*H) Note: The products of the manufacturer Kiteo are individually manufactured especially for you according to your specification. This also explains the longer delivery time of 1-3 weeks depending on the workload. For further information please refer to the data sheet in the download tab.

Futuristic LED pendant luminaire 72W 3800lm - dimming with DALI or ZigBee or Casambi With VIBE you get a pioneering pendant luminaire that takes biometric light to a new level. It immediately catches the eye of every observer - especially because of its unique design, which is combined with high-quality materials. In addition to PI LEDs, the luminaire has a powder-coated aluminum frame. At the same time, VIBE is fully in line with Human Centric Lightning: The simulation of the daylight sequence allows you to cover a wide color temperature range from 1800 K to 16000 K. Another highlight are the innovative control options from VIBE: Smart lighting control with NeoLink / ZigBee Control of complex lighting systems with DALI DT8  Control via Casambi possible series of measurements with the PI-LED spots from Kiteo Furthermore, the pendant luminaire can be controlled directly and indirectly separately. In addition, the operating temperature is monitored with an automatic dimming protection function. Product overview and features: Unique futuristic design High-quality materials, e.g. aluminum frame powder-coated, RAL 9003 matt High color locus stability thanks to microcontroller-controlled LED management Temperature compensation Factory calibration Soft light mixture and even light distribution Direct and indirect control / automatic dimming protection function Direct 230 VAC connection Pendant mounting Ordering data for VIBE: The luminaire is available separately and differs in its control (DALI or NeoLink / ZigBee or Casambi). There is also a complete package including control and accessories. That means that in this package the wireless rotary control K-ZWALLY is included. In interaction with the luminaire, the controller covers a wide range of functional options. The luminaire in the package is controlled via NeoLink / ZigBee. Technical data: light source LED module (PI-LED) Operating voltage 230 VAC Performance 72 W luminous flux 3800 lm Color temperature 1800 K - 16000 K Color rendering index (CRI) & gt; 90 Control NeoLink / ZigBee DALI DT8 Casambi Dimming range CCT / CIE-xy 5-100% RGB 0-100% Degree of protection IP20 Protection class SKI Lifetime L80 / B10 50000 h Dimensions 810 x 510 x 390 (L * W * H) Note: The products of the manufacturer Kiteo are individually tailored to suit your needs. Made especially for you according to your specification. This also explains the longer delivery time of 1-3 weeks depending on the workload. For more information, please refer to the data sheet in the download tab.

4-way radio button - simulation of different lighting moods with a range of 100 m This programmable 4-way radio button is particularly impressive due to its intuitive operation. This means that even untrained people are immediately able to set pre-programmed lighting moods quickly and easily. Specifically, four predefined color light scenes can be called up. Because of this, the 4-way wireless pushbutton is ideally suited for a wide variety of indoor lighting applications, such as living rooms, offices or changing Rooms. Communication with the lights takes place via ZigBee, which enables a combination with other systems. Product overview and Features: Individual retrieval of four pre-programmed color light scenes (CCT and color) Communication with lights via ZigBee Can be integrated into other systems that work with the ZigBee Light Link protocol Icon design of the buttons can be customized, i.e. Fields are assigned individually and adapted to the respective project (e.g. living space with morning, day, evening and work moods) Technical data: Transmission / reception frequency 2,4 GHz Range appprox ca. 100 m (free field) Protection class device IP 20 Temperature range -5 °C to 45 °C Surface Plastic lacquered Dimensions 64 x 64 x18 mm (L*W*H) For more information, please refer to the data sheet in the download tab.