DALI MC4L Control module with 4 L inputs | 86458507
Product information "DALI MC4L Control module with 4 L inputs | 86458507"
DALI control module with 1-4 switching inputs for 230V (L)
Each switching input can be assigned an effective range, switching behavior and DALI commands. In addition to the standard functions such as dimming, switching, scene recall, etc., predefined macros such as color temperature control, dynamic scenes, sequences and user-defined command lists are also supported. The compact control module can be inserted in the flush-mounted box behind the switch.
Overview:
- DALI(-2) control unit with switching input (MC1L) or 4 switching inputs (MC4L) for mains voltage.
- The function can be configured for each switching input (MC4L)
- 4 potentiometers - buttons that by pushing and turning adjust the settings (on/off and dimming) manually on the module (POTI)
- Each input can be assigned an effective range, switching functions and DALI command(s) (MC4L)
- DALI DT8 support for controlling the color temperature of luminaires using corresponding macros (MC4L)
- Configurable “Power Up” Function (MC4L)
- The module can work as an application controller or as a digital input instance, which only sends information about the status of the input (according to IEC62386-301) (MC1L; POTI)
- Application Controller: direct control of DALI devices - effective range, switching behavior and DALI commands can be defined (MC1L, DALI-2 MC4L)
- In addition to the standard DALI commands, the application controller also enables DALI DT8 TC and RGB(W) control (DALI-2 MC4L)
- Easy integration with four DALI-2 pushbutton instances (DALI-2 MC4L)
- NFC variant for easy, contactless configuration with LUNATONE NFC smartphone app (DALI-2 NFC)
- DALI-2 control unit according to IEC62386-103 (DALI-2 MC4L)
- Galvanic isolation between switching input and DALI interface
- DALI DT8 support for controlling the color temperature of luminaires using appropriate macros
- configurable “power-up” behavior
- The configuration is done using the DALI Cockpit and an interface module (e.g. DALI USB)
- Multi-master capable, several modules can be used on the same bus
- Suitable for installation in protection class II devices or box installation
| Type |
DALI MC1L |
DALI MC4L
|
DALI-2 MC4L
|
DALI-2 MC4L POTI |
|||
| Article number | 86458507-1L | 86458507-4L 86458507-4LHS |
86458507-4L-2-app |
86458507-4L-2-int |
86458507-4L-NFC | 86458507-4L-POTI | |
| Note | On switch signal --> A DALI command |
4 x L input --> 4 different DALI commands |
App controller enabled | Instances enabled | Configurable via NFC (Lunatone app) |
4 potentiometers for adjusting the light level | |
| Electrical data | |||||||
| Supply | from DALI bus | ||||||
| typ. Power Consumption | 3.5mA (DALI) | 3.5mA (DALI) | 2.6mA (DALI) | 1,7mA (DALI) | |||
| Input | 1 switching input "L" | 4 switching inputs for "L" | Switch inputs for "L" | 4 switch inputs for "L" | |||
| Output | DALI | DALI | DALI, DALI-2, Multimaster | DALI, DALI-2, Multimaster | |||
| Specifications | |||||||
| Ambient temperature | -20°C … +75°C | ||||||
| Protection class | IP20 | ||||||
| Connection wires cross-section | Socket installation with spring clamp for 0.5 … 1.5 mm2 (AWG 20 … AWG 16), DIN rail with screw terminal for 0.5 … 2.5 mm2 (AWG20 …AWG14) |
||||||
| Dimensions (LxWxH) | see figures or data sheet | ||||||
| Case Type | Socket installation | socket installation or DIN rail | socket installation or DIN rail | socket Installation or DIN rail | |||
For more information, please refer to the respective data sheets in the download tab
| Application/IP-Code: | IP20 - IP44 (Indoor) |
|---|---|
| Dimmable/Control: | DALI, DALI DT8 |
Login
22 October 2020 22:06
Bietet viele Kommando-Optionen.
Nutze das Modul, um diverse Schalter zentral zu DALI-fizieren. Hab die HS Version im Einsatz.
sw_similar
DALI MC Multi Control Module | Lunatone 86459532
€52.69*
DALI MC / DALI-2 MC Multi Control control module 86459532 with 1 to 4 programmable, potential-free inputs
The DALI MC (+) from Lunatone is a & nbsp; push button coupler / interface for connecting four conventional switches or buttons.
Now also the versions for DALI-2.
Various DALI commands can be assigned to each input via PC software: dim up, dim down, off, recall min., Recall max., Goto scene 1-16, direct arcpower ...%, mask and predefined macros.
The compact DALI-2 MC / DALI MC + can be inserted into the flush-mounted box behind the switch, turning a standard light switch or button into a DALI control device.
The compact device can be inserted into the flush-mounted box behind the switch. In addition to the configuration via the DALI Cockpit PC software, selected settings can also be made using an NFC-enabled smartphone and the Lunatone NFC app.
Features DALI MC (in phase out):
Compact control module with four freely programmable switching inputs or analog inputs (MC +) for mains voltage
A maximum of 2 functions can be assigned to each input, depending on the switching behavior (short or long button press, toggle, edge-controlled relay mode)
connection a 100KOhm potentiometer (MC + only)
The following functions are available:
dim up,
dim down,
recall min, max
got scene 1-16
direct arcpower in%
and both predefined and self-configurable macros
Control of the color temperature (DT8) with Step Cooler, Step Warmer commands (MC + only)
With analog inputs, the input signal is converted directly into a DALI dimming level. The conversion can be initiated periodically or by a trigger (MC + only).
Possibility of a configurable power-up function, i.e. automatic sending of an adjustable command after a voltage interruption
Configuration via DALI-Cockpit and DALI-USB interface (also DALI-PS required)
Possibility of addressing individual addresses (1-64), groups (1-16), and broadcast multi-master capability, several modules can be installed in a DALI circuit
Use with default setting for dimming and switching applications without additional configuration possible
The module can be inserted in a flush-mounted box directly behind a light button
The module is supplied directly via the DALI line and does not have to be connected to the network
The buttons are connected directly to the module (potential-free closing contacts) (MC)
DALI MC + with alternatively also an analog input. Connection of 100kOhm potentiometer possible.
Features for DALI-2 MC
Compact DALI-2 control module with 4 potential-free inputs
Multi-master capable. Several modules can be installed in a DALI circuit and / or a DALI group.
Individual DALI commands can be assigned to each input
Integrated DALI-2 application controller
Simple integration through four DALI-2 pushbutton instances
In addition to the standard DALI commands, the application controller also enables DALI DT8 TC and RGB (W) control
Supports short button press, long button press (with repetition for dimming) and Toggle
In addition to buttons, also suitable for switches.
New: Alternative button function, each of the inputs can also be assigned a second function, which can be activated / deactivated via a scene command on the DALI bus or via a switch on input 4. In this way, for example, the partition wall problem can be solved.
Sequences, macros and other functions are available in the application controller.
Simple configuration via LUNATONE DALI USB interface and DALI cockpit software tool.
New: NFC variant for simple, contactless configuration with LUNATONE NFC smartphone app
Easy installation: the device can be placed in a flush-mounted box and is supplied via the DALI bus
DALI-2 control unit according to IEC62386-103.
Technical data for DALI-2 MC:
Type
DALI-2 MC
DALI-2 MC integration
DALI-2 MC NFC
Article number
86459532-2-app
86459532-2-int
86459532-NFC
GTIN
GTIN 9010342013492
GTIN 9010342012730
Delivery status
App-Controller App-Controller App-Controller activated
Instances activated
App-Controller App-Controller activated
Note
The application controller leads to direct DALI control commands, which are executed immediately by the DALI drivers. (see MC +)
The DALI-2 instances generate event messages that are interpreted and processed by higher-level control units (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).
The DALI-2 MC NFC includes a nearfield communication interface. This means that the configuration can be carried out not only with the DALI Cockpit software, but also via this NFC interface with a smartphone app.
DALI interface, supply:
Type of exit
DALI, DALI-2, Multimaster
Identification of terminals
DA, DA
Voltage range
9.5V - 22.5Vdc according to IEC62386
typ. Current consumption DALI (16.5V)
1.7 mA
max. Current consumption DALI (22.5V)
2 mA
DALI addresses
none
DALI-2 addresses
one
inputs & nbsp;
Entrances for
Potential-free buttons / switches
Number of inputs
4
Identification of input terminals
T1, T2, T3, T4, COM
Control pulse length min.
40ms
Control pulse length long button press
adjustable from 200-5100ms
Max cable length button inputs
50cm
General data: & nbsp;
Dimensions
40mm x 28mm x 15mm
Assembly
Installation installation box, installation in protection class II devices
max. Rated temperature tc
75 ° C
Expected lifetime
200,000h
Protection class
SKII if installed as intended
Protection type housing
IP40
Protection class terminals
IP20
For further information (also DALI MC +) please refer to the data sheets in the download tab.
Variants from €61.48*