DALI MC Multi Control Module | Lunatone 86459532

Lunatone DALI control module Analog DALI 100 kOhm DALI control module with analog input for connecting a 100k potentiometer With the DALI 100k, the luminaires in a DALI circuit can be controlled with a 100kOhm potentiometer.   Product characteristics: Compact control module with analog input for direct connection of a 100k potentiometer The input signal is directly converted into a DALI dimming value The conversion can be triggered periodically or by a trigger A change of the input signal (>2%) is used as the event trigger for the conversion. The dimming value can be sent to individual addresses, groups and broadcast Configuration via DALI-Cockpit and DALI-USB Interface Configuration via DALI-Cockpit and DALI-USB Interface Multimaster capable, multiple modules can be installed in a DALI circuit The module can be inserted in a flush-mounted box directly behind the potentiometer The module is supplied directly via the DALI line Technical data: Supply: from DALI bus Typical current consumption: <3 mA Inputs: 100k Potentiometer Output: DALI Temperature: 0 °C - 50 °C Protection class: IP20 Connecting wires Cross section: 0.5-1.5 mm2 max. cable length push-button module: 50 cm Dimensions (L x W x H): 40 mm x 28 mm x 15 mm

DALI control module sequencer for automatic sequences DALI command sequences can be played with the DALI sequencer. Both sequential scene calls and user-defined command sequences are supported.   Product characteristics Compact control module, enables automatically running sequences Memory for up to 4 sequences A command sequence can consist of up to 19 DALI commands The module fits into a flush-mounted box Types for back box and dinrail mounting Din rail type provides 4 switching inputs for mains voltage A sequence can consist of any command sequences or scene calls If the sequencer is assigned to a group, a running sequence can also be stopped with group and broadcast commands The sequence can be executed once or cyclically Simple configuration via DALI cockpit y calling up scenes 0-3 at the sequencer address, the corresponding sequences can be started The module draws 2mA from the Dali circuit, an additional supply is not necessary Multimaster capable, multiple master modules can be installed in a DALI circuit Technical Data: Type DALI Sequencer Article number 86459582 86459582-HS Suppy via DALI- Bus typ. current consumption 2 mA Control DALI Input DALI DALI 4 switching inputs (mains voltage) Function programmierbare Sequenzen Temperatur 0 °C - 50 °C Protection class IP20 Connecting wire cross section 1.5 mm² 2.5 mm² Mounting back box dinrail, 1TE Dimensions 39,7mm x 28mm x 14mm 98mm x 17.5mm x 56mm

DALI scene control module Module for the call up of DALI scenes with conventional light buttons The DALI SC / SC-A is a control unit for the call up of DALI scenes. With help of a rotary switch on the backside of the can be defined, which of the 16 possible scenes are called up with a button push. The 4 independent button inputs can be assigned to 4 light scenes. The modules find room in the flush-mounted box behind the light button. The customary light buttons is becoming a DALI scene switch with this. The supply of the module happens via DALI Bus.  Product specifications The DALI SC offers in contrast to the DALI SC-A the possibility, to program light scene values in DALI operating units. Compact control module for the call up of light scene values in DALI operating units With the a adjustment of a rotary switch on the module the scenes can be preselected, which can be called up via button push The inputs can be switched with standard buttons Multiple modules can be installed DALI circuit The Module can be laid into a flush mounted box, directly behind the light button The supply of the module happens directly through the DALI line The buttons are connected directly to the module (potential-free make contacts) Technical data: Supply: via DALI bus Current consumption: 6 mA Inputs: 4 buttons Output: DALI (broadcast) Scenes: 4 of 16 Scene selection: Rotary switch on the back of the module Temperature: 0 °C - 50 °C Protection type: IP20 Connecting wires: 0.75 mm2 Connecting length: 250 mm

DALI control module with 1-4 switching inputs for 230V (L) Each switching input can be assigned an effective range, switching behavior and DALI commands. In addition to the standard functions such as dimming, switching, scene recall, etc., predefined macros such as color temperature control, dynamic scenes, sequences and user-defined command lists are also supported. The compact control module can be inserted in the flush-mounted box behind the switch. Overview: DALI(-2) control unit with switching input (MC1L) or 4 switching inputs (MC4L) for mains voltage. The function can be configured for each switching input (MC4L) 4 potentiometers - buttons that by pushing and turning adjust the settings (on/off and dimming) manually on the module (POTI) Each input can be assigned an effective range, switching functions and DALI command(s) (MC4L) DALI DT8 support for controlling the color temperature of luminaires using corresponding macros (MC4L) Configurable “Power Up” Function (MC4L) The module can work as an application controller or as a digital input instance, which only sends information about the status of the input (according to IEC62386-301) (MC1L; POTI) Application Controller: direct control of DALI devices - effective range, switching behavior and DALI commands can be defined (MC1L, DALI-2 MC4L) In addition to the standard DALI commands, the application controller also enables DALI DT8 TC and RGB(W) control (DALI-2 MC4L) Easy integration with four DALI-2 pushbutton instances (DALI-2 MC4L) NFC variant for easy, contactless configuration with LUNATONE NFC smartphone app (DALI-2 NFC) DALI-2 control unit according to IEC62386-103 (DALI-2 MC4L) Galvanic isolation between switching input and DALI interface DALI DT8 support for controlling the color temperature of luminaires using appropriate macros configurable “power-up” behavior The configuration is done using the DALI Cockpit and an interface module (e.g. DALI USB) Multi-master capable, several modules can be used on the same bus Suitable for installation in protection class II devices or box installation   Type DALI MC1L DALI MC4L DALI MC4L-HS DALI-2 MC4L DALI-2 MC4L-HS DALI-2 MC4L POTI Article number 86458507-1L 86458507-4L86458507 -4L 86458507-4L86458507-4LHS 86458507-4L-2-app 86458507-4L-HS-2-app 86458507-4L-2-int 86458507-4L-HS-2-int 86458507-4L-NFC 86458507-4L-POTI Note On switch signal --> A DALI command 4 x L input --> 4 different DALI commands App controller enabled Instances enabled Configurable via NFC (Lunatone app) 4 potentiometers for adjusting the light level Electrical data   Supply from DALI bus typ. Power Consumption 3.5mA (DALI) 3.5mA (DALI)   2.6mA (DALI) 1,7mA (DALI) Input 1 switching input "L" 4 switching inputs for "L"    Switch inputs for "L" 4 switch inputs for "L" Output DALI DALI   DALI, DALI-2, Multimaster DALI, DALI-2, MultimasterDALI, DALI-2, Multimaster Specifications   Ambient temperature -20°C … +75°C Protection class IP20 Connection wires cross-section Socket installation with spring clamp for 0.5 … 1.5 mm2 (AWG 20 … AWG 16), DIN rail with screw terminal for 0.5 … 2.5 mm2 (AWG20 …AWG14) Dimensions (LxWxH) see figures or data sheet Case Type Socket installation socket installation or DIN rail   socket installation or DIN rail socket Installation or DIN rail     For more information, please refer to the respective data sheets in the download tab