DALI Power Poti

DALI ROT Rotary Switch with Control Module - Dimming in DALI Systems With the help of the highly functional DALI ROT control module, the brightness and color of DALI luminaires can be set depending on the variant. For this, the module has several versions for controlling Tuneable White or RGB/W capable luminaires. Individual DALI commands can be assigned to the pushbutton and rotary knob. DALI ROT is particularly suitable for commercially available flush-mounted boxes and is used in combination with most switch programs. Product overview / features: DALI ROT control module for switching, dimming and setting color or color temperature, depending on the variation (dimming function): Intensity : Brightness control TW : Control of brightness and color temperature of DT8 Tunable White luminaires RGB : Control of brightness and color of DT8 RGB luminaires RGBW : Control of brightness and color / white channel of DT8 RGBW luminaires Multi-master capable, i.e. installation of several modules in a DALI circuit Simple software configuration and installation in a standard flush-mounted box Variants also available with direct bus power supply 70mA (-PS) Notes : The control module is compatible with covers and rotary knobs from common manufacturers. Suitable accessories can also be found under the following link: DALI ROT Accessories - Rotary Knob, Cover and Adapter. Detailed instructions regarding installation and commissioning can be found in the attached data sheet (starting page 6). Technical data: Specification DALI ROT (standard version): Type DALI ROT DALI ROT TW DALI ROT RGB DALI ROT RGBW Article number 86459822-I-0 86459822-TW-0 86459822-RGB-0 86459822-RGBW-0 DALI interface, supply: Type of input DALI, supply Marking of terminals DA, DA Voltage range 9.5V ... 22.5 VDC according to IEC62386 Typical Current consumption DALI 1.6 mA Environmental conditions: Transport and storage temperature - 20 °C ... + 75 °C Operating temperature - 20 °C ... + 75 °C Rel. humidity 15% ... 90%, non-condensing General data: Dimensions (LxWxH) 70mm x 70mm x 45mm Axis diameter 4mm, adapter for 6mm Assembly / use Installation box Protection class II if installed as intended Protection type housing IP40 Protection class terminals IP20 Operation Push button and rotary knob Function Intensity Intensity & Tunable White Intensity & RGB Intensity & RGBW Specification DALI ROT PS (bus supply): Unless specified otherwise in the table below, the information applies to the standard version. Type DALI RED DALI ROT TW DALI RED RGB DALI ROT RGBW Article number 86459822-I-PS 86459822-TW-PS 86459822-RGB-PS 86459822-RGBW-PS Input: L, N Type of input Supply, mains voltage Marking of terminals N, L Input voltage range 230 VAC Max. Input current 17 mA Mains frequency 50Hz / 60Hz Power consumption max. 2 W Switch-on ramp-up time <250 ms Output: DA +, DA- Type of output DALI Marking of terminals DA-, DA + Output voltage range 12 VDC ... 20.5 VDC Guaranteed DALI output current 70 mA Max. DALI output current 80 mA No-load proof Yes Short-circuit proof Yes General data: Dimensions (LxWxH) 70mm x 70mm x 60mm For more information, please refer to the data sheet in the download tab.