DC MAXI JOLLY SV DALI
Product information "DC MAXI JOLLY SV DALI"
TCI DC MAXI JOLLY SV DALI
- Multipower-Treiber mit Dip-Schalter für die Auswahl des Ausgangsstroms.
- IP20 unabhängiger Treiber für den Innenbereich (DC MAXI JOLLY SV DALI).
- Klasse II Schutz gegen Stromschlag für direkte oder indirekte Ansprechpartner (DC MAXI JOLLY SV DALI).
- Treiber für den eingebauten Gebrauch (DC MAXI JOLLY SV BI DALI).
- Es kann für Beleuchtungseinrichtungen der Schutzklasse I und II verwendet werden (DC MAXI JOLLY SV BI DALI)
- Aktive Leistungsfaktor-Korrektur.
- Analog-Eingang (NTC) für den Anschluss von thermischen Sensoren.
- Zusatzausgang 12 V max. 100 mA.
- Stärkte Regelung ±5% einschliesslich Temperaturschwankungen.
- Eingangs- und Ausgangsklemmen auf der gleichen Seite (Drahtquerschnitt bis 2,5 mm2 / AWG13).
- Klemmschrauben auf Primär- und Sekundärschaltungen für Kabel mit Durchmesser: min. 3 mm – max. 8 mm (DC MAXI JOLLY SV) DALI).
| Application/IP-Code: | IP20 - IP44 (Indoor) |
|---|---|
| Constant Current: | 0,4A, 0,5A, 0,6A, 0,7A, 0,8A, 0,9A, 0,35A, 0,55A, 0,65A, 0,75A, 0,85A, 0,95A, 1,0A, 1,2A |
| Dimmable/Control: | DALI |
| Power range: | 5 - 20 W, 20 - 50 W |
Login
sw_related
Synchronisation cable for TCI LED driver Jolly
€2.67*
One Master and up to 9 Slaves via TCI sync cable
A special feature of TCI-Jolly converter is the ability to synchronize them together.
You have to control only one Jolly converter as a master in an extensive system. All as a slave connected converters can be controlled, regardless of whether DALI, 1-10V, push-button operation or phase angle control.
One master can drive max. 9 slaves.
Depending on the application, these sync cables, which only need to be connected, are available in various lengths.
The weight of the different lengths:
20 cm = 4 gram
50 cm = 9 gram
1 m = 22 gram
1.5 m = 27 gram
4 m = 72 gram
sw_similar
TCI MAXI JOLLY US DALI 60 W | 127413 | 151413
€54.95*
TCI DC Maxi Jolly US DALI 60W - Flickerfree Constant Current Dimming via DALI
Two successors of the famous LED ballast from TCI: DC Maxi Jolly US DALI 50W. (#123413)
Noteworthly innovations:
Power: 60W instead of 50W
Novel dimming to avoid flicker
Type 127413
Hybrid: Combination of linear (AM) and known PWM
Conditionally suitable for cameras according to the following dimming ranges
Linear dimming (flickerfree) in the range of 100% - 25%
Switching to PWM (2KHz) in the range 25% - 1%
As a result, very precise dimming even in the lower dimming range
Optionally switch to PWM only at 240Hz by setting a bridge possible. (Details in the data sheet)
Master/slave operation possible via sync lines
Type 151413
Pure amplitude dimming (linear dimming)
Camera-friendly without restriction (no flicker, even at high shutter speeds, as no PWM)
Dim2warm available
Tc-value of 90°C
Note: Value for constant current, or voltage can be set via dip switch.
By the possibility to configure currents from 350mA to 1050mA, As well as a power of up to 60W, this LED constant current converter is versatile. In addition, it offers dimming options for 1-10V or also via touch operation.
Overview of the technical data of the LED ballast 60W from TCI
Multi-Current Converter - Universally applicable.
Ext. Temperature sensor optional (connection for NTC available)
Dimming option via 1-10V control voltage. (Or alternatively via a 100K ohms potentiometer)
Push button or button operation: On / off by means of short push button, change of the brightness of the held button.
As a US version with remarkable improvements:
Improved EMC
Improved Overvoltage proctection (Surge) of 3.5-4kV
UL certified
Dipswitch settings
Dip-SW
Power
Spg. sec
Current sec
Position 1
25 W
2...74 V max.
350mA const.
Position 2
35 W
2...72 V max.
500mA const.
Position 3
39 W
2...72 V max.
550mA const.
Position 4
46 W
2...72 V max.
650mA const.
Position 5
50 W
2...72 V max.
700mA const.
Position 6
54 W
2...72 V max.
750mA const.
Position 7
60 W
2...70 V max.
850mA const.
Position 8
60 W
2...66 V max.
900mA const.
Position 9
60 W
2...60 V max.
1.00A const.
Position 10
60 W
2...57 V max.
1.05A const.
Efficiency of the LED driver depending on the power: 30W - 60W: 87% - 92%
All TCI Jolly LED ballasts with PWM are dimmable via sync cable. Thus, the control is possible via only one push-button.
Up to 10 LED converters (slave) can be operated via a master.
Switches and installation materials are not included in the scope of delivery.
For detailed description please refer to the data sheet.
History of this proven TCI LED Converter for dimming via DALI, 1-10V or Push
TCI 122412 --> Setting range 350mA - 1.4A and fixed voltage 48V
TCI 122413 --> Setting range 350mA - 1.05A and fixed voltage 48V, US version with higher surge voltage
TCI 123413 --> Like 122413, but also compliance with the ecodesign directive with standby power <0.5W