Synchronisation cable for TCI LED driver Jolly

LED driver DC Mini Jolly 125400/125404 | 151400/151404  Proven LED driver 20W | 1-10V/touch dimming | 250mA - 900mA adjustable, (24V) | With strain relief or also as flush mount Version TCI #125400/125404 and 151400/151404 are the new Mini Jolly | with hybrid dimming flicker optimized or completely flicker free with AM Control. DC Mini Jolly is considered to be the "little brother" of the LED driver DC Maxi Jolly and fits through 68mm ceiling holes for e.g. recessed luminaires with LED. Multi-current or multi-voltage converter - universally applicable flicker (output ripple) <= 3% Control via 1-10V interface or push button On/Off with a short key press, brightness change via held button available in different versions (PWM, Hybrid, AM) TCI 125400/125404 (20W) is the technologically improved successor of the #123400 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used. By removing a jumper (JP4) you can switch back to "PWM-only" (incl. activation of constant voltage mode). (see 123400). In addition, further setting options for the currents have been added. TCI 151400/151404 (20W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm. Attention: No constant voltage operation adjustable. Please also read this technical article about PWM/AM/Hybrid dimming modes. As a proven multi-current converter - universally applicable. Also available as Built-In version (125404, 151404) TCI 125400 / TCI 125404 / TCI 151400 / TCI 151404 Dip-SW Performance Spg. sec Current sec # LED Position 1 13 W 20...53 V 250mA const max 15 Position 2 15 W 20...52 V 300mA const max 14 Position 3 18 W 15...50 V 350mA const max 14 Position 4 20 W 15...50 V 400mA const max 14 Position 5 20 W 5...45 V 450mA const max 12 Position 6 20 W 5...40 V 500mA const max 11 Position 7 20 W 3...37 V 550mA const max 10 Position 8 20 W 3...34 V 600mA const max 9 Position 9 20 W 3...31 V 650mA const max 8 Position 10 20 W 3...29 V 700mA const max 8 Position 11 20 W 3...27 V 750mA const max 7 Position 12 20 W 3...25 V 800mA const max 7 Position 13 20 W 3...24 V 850mA const max 6 Position 14 20 W 3...23 V 900mA const max 6 Position 15* 10 W 12 V constant 830mA max - Position 16* 20 W 24 V constant 900mA max - *digit 15/16 only available for 125400/125404 (Remove JP4 for this) Efficiency as a function of power:  84%  - 91% Flicker ( Output Ripple ) <= 3% Buttons and installation material are not included. For detailed description, please refer to the data Sheets. History (predecessor) of this proven TCI DC Mini Jolly 20W TCI 123400 (formerly 122400) with 20 Watt. Constant current, resp. voltage. All adjustable via dip switches. (123400 is identical successor of 122400 and already complies with the Ecodesign Directive). The LED current is controlled via pulse width modulation (PWM) without exception.

LED driver DC Jolly up to 32W dimmable via push button or 1-10V Suitable for 68mm ceiling holes for e.g. ceiling installation of LED spots. TCI DC Jolly: Universally dimmable over 1-10V Touch dimmer input of the DC Jolly On/Off by briefly pressing the button, changing the brightness with the button held down. Easily adjustable constant current or voltage via dip-switches. Thus a universally applicable multi-current or multi-voltage converter.  Flicker (output ripple) <= 3% available in different versions (PWM, Hybrid, AM) The Jolly US 32 can be used for to 32 watts power. Current versions offer PWM, Hybrid (AM+PWM) and AM-only regulation/dimming. TCI 126421 (up to 32W) is the technologically improved successor of #125421. (Previous models in short description see below). Its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% is there a switchover to the familiar PWM control. Thus the advantages of both methods are used. By removing a jumper (JP3) it is possible to switch back to "PWM-only" (incl. activation of constant voltage operation). (see 125421). In addition, further setting options for the currents have been added. TCI 151421 (up to 32W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suitable for Dim2Warm. Attention: No constant voltage operation adjustable as well as no operation with synchronization lines (Master-Slave) possible. Please also read this technical article about PWM/AM/Hybrid dimming modes. As a proven multi-current converter - universally applicable. Also available as Built-In version (TCI 126450, TCI 151450) Setting options of the DC Jolly series DC-Jolly US 32 Dip-SW Performance Spg. sec Current sec # LED Position 1 13 W 15...53 V 250mA const. 15 Position 2 16 W 15...53 V 300mA const. 15 Position 3 18 W 10...53 V 350mA const 15 Position 4 21 W     10...53 V 400mA const. 15 Position 5 23 W 5...52 V 450mA const. 15 Position 6 25 W 2...50 V 500mA const. 14 Position 7 27 W 2...50 V 550mA const. 14 Position 8 30 W 2...50 V 600mA const. 14 Position 9 32 W  2...49 V 650mA const. 14 Position 10 32 W 2...46 V 700mA const. 13 Position 11 20 W 2...27 V 750mA const. 7 Position 12 20 W 2...25 V 800mA const. 7 Position 13 20 W 2...24 V 850mA const. 6 Position 14 20 W 2...22 V 900mA const. 6 Position 15* 11 W 12 V const. 900mA max. - Position 16* 20 W 24 V const. 830mA max. - *Position 15/16 only available for devices with PWM/Hybrid (Remove JP3 for this) Efficiency (max.) depending on power: >88% Flicker ( Output Ripple ) <= 3% Pushbutton and installation material are not included in the package. History ( predecessor ) of the approved LED driver DC Jolly 1-10V & PUSH  TCI 122420 with up to 25 Watt. constant current, or -voltage. Everything adjustable via dip switches. The LED current is regulated without exception via pulse width modulation (PWM) ( discontinued - successor 126421)  TCI 122421/123421 with up to 32 Watt. Almost identical to the 122420 with slightly higher power and wider setting ranges for the constant currents and constant voltage outputs ( discontinued - successor 126421)  TCI 125421 with up to 32 Watt. Almost identical to the 123421 but with considerably more setting ranges for the constant currents ( discontinued - successor 126421) For a detailed description of the DC Jolly please refer to the corresponding data sheets. See tab DOWNLOADS

One Master and up to 9 Slaves via TCI sync cable A special feature of TCI-Jolly converter is the ability to synchronize them together. You have to control only one Jolly converter as a master in an extensive system. All as a slave connected converters can be controlled, regardless of whether DALI, 1-10V, push-button operation or phase angle control.   One master can drive max. 9 slaves. Depending on the application, these sync cables, which only need to be connected, are available in various lengths.   The weight of the different lengths: 20 cm = 4 gram 50 cm = 9 gram   1 m     = 22 gram 1.5 m = 27 gram 4 m = 72 gram  

Jolly Slim LED converter; dimmable; 1-10V & Push-Button-funktion TCI 122680, 32 watt. Selectable constant current, constant voltage via dip-switch.Flicker ( Output Ripple ) <= 3% A very slim, but longish LED converter with special dimensions: 237mm x 30mm x 20mm Multicurrent-multivoltage converter- universally applicable.Controll via  1...10V interface or Push-Button. On/off by a short push. Brightness can be changed by a longer push. Regulation stops automatically when it reaches the minimum and maximum values. Dip-SW Power out Voltage out Current out # LED Position 1 17 W 47 V max. 350mA const. 15 Position 2 24 W 47 V max. 500mA const 15 Position 3 32 W 47 V max. 700mA const 15 Position 4 20 W 24 V const 900mA max - Efficiency depending of the power:  84%  - 91% Button and installation materials are not included in delivery. For detailed description please refer to the data sheet.

TCI DC Jolly DALI LED driver; dimmable; 32W The little brother of the "Maxi Jolly DALI" is considered as a link between the LED drivers: Mini and Maxi Jolly.Suitable for 68mm ceiling holes for e.g. ceiling installation of LED spots. (With sufficient ceiling distance!) TCI DC Jolly: Universally dimmable via DALI Easily adjustable constant current or constant voltage via dip-switch. Universally applicable multi-current or multi-voltage converter. Flicker ( Output Ripple ) <= 3% Available in different versions (PWM, Hybride, AM) TCI 123424 (formerly 122424) with up to 32 Watt. Constant current or voltage. All adjustable via dip-switches.(123424 is the identical successor to the 122424 and thus complies with the Ecodesign Directive)The LED current is regulated without exception via pulse width modulation (PWM).TCI 125424 (up to 32W) is the technologically improved successor of the #123424 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used.By short-circuiting the NTC input when switching on, it is possible to switch between "PWM-only" including activation of constant voltage mode (compare 123424) and hybrid mode. Confirmation by single flashing (PWM), double flashing (hybrid)TCI 151424 (up to 32W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm.Attention: No constant voltage operation adjustable.As a proven multi-current converter - universally applicable. Also available as Built-In version (123458, 125458, 151458).  Dip-SW Power Out Voltage Out Current Out Position 1 12 W 10...48 V max. 250mA const. Position 2 14 W 10...48 V max. 300mA const Position 3 17 W 5...48 V max. 350mA const Position 4 19 W 5...48 V max. 400mA const Position 5 22 W 5...48 V max. 450mA const Position 6 24 W 5...48 V max. 500mA const Position 7 26 W 3...48 V max. 550mA const Position 8 29 W 3...48 V max. 600mA const Position 9 31 W 3...48 V max. 650mA const Position 10 32 W 3...46 V max. 700mA const Position 11 10 W 12 V constant 900mA max Position 12 20 W 24 V constant 830mA max Efficiency depending of the power: 20W - 32W: 84% - 91% DC Jolly DALI, as all TCI converters can be connected to each other via sync-cable. Thus, the control over only one button is possible. Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves). Button and installation materials are not included in delivery. Savings tip: Master as DALI and the slaves use the cheaper variant DC Jolly without DALI. On request, this product is also available as a built-in version (ideal for device installation) with a modified design (see data sheet). For detailed description please refer to the data sheet.

TCI DC Mini Jolly DALI | Proven LED driver 20W | DALI | 250mA - 700mA adjustable, (24V) | With strain relief or also as recessed version TCI125403 (20W) is the technologically improved successor of #123403 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% through linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus, the advantages of both methods are used. By short-circuiting the NTC input when switching on, it is possible to switch between "PWM-only" and activation of constant voltage operation (see 123403) and hybrid operation. Confirmation by single flashing (PWM), double flashing (hybrid). Read also this technical article on the dimming types PWM / AM / Hybrid. TCI151403 (20W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suitable for the use with Dim2Warm. Attention: Constant voltage operation is not possible. As a proven multi-current converter - universally applicable. Also available as Built-In version (123403BI, 125403BI, 151403BI) Technical Details: Dip-SW Power  Voltage out Current out # LED Position 1 12 W 15...49 V 250mA const. max 14 Position 2 17 W 2...49 V 350mA const max 14 Position 3 19 W 2...49 V 400mA const max 14 Position 4 20 W 2...45 V 450mA const max 13 Position 5 20 W 2...40 V 500mA const max 11 Position 6 20 W 2...36 V 550mA const max 10 Position 7 20 W 2...33 V. 600mA const max 9 Position 8 20 W 2...28 V 700mA const max 8 Position 9* 16 W 24 V constant 700mA max - *Position 9 only available for 125403/125403BI. Efficiency of DALI LED drivers depending on power: 10-20W: 87% - 91% Flicker ( Output Ripple ) <= 3% For a detailed description please refer to the data sheets (see downloads) History (predecessor) of this proven TCI DC MiniJolly DALI 20W TCI 123403 (formerly 122403) with 20 Watt. Constant current, resp. voltage. All adjustable via dip switches. (123403 is identical successor of 122403 and already complies with the Ecodesign Directive). The LED current is controlled via pulse width modulation (PWM) without exception.

TCI Jolly DIN 32 LED Driver for Top Hat Rail; 1...10V & Push dimmable TCI 127100 32 Watt, selectable constant current via dip-switch. DIN rail LED Driver. Multi-current-converter - suitable for DIN rails / top hat rails. Control via 1...10V interface or Push-Button. On/off by a short push. Brightness can be changed by a longer push. Flicker ( Output Ripple ) <= 3%  Dip-SW  Power out  Voltage out  Current out  # LED  Position 1  10 W  50 V max.  200mA const.  max 16  Position 2  13 W  52 V max.  250mA const.  max 16  Position 3  16 W  53 V max.  300mA const.  max 16  Position 4  19 W  53 V max.  350mA const.  max 16  Position 5  21 W  53 V max.  400mA const.  max 16  Position 6  24 W  53 V max.  450mA max.  max 14/15  Position 7  27 W  53 V max.  500mA max.  max 13/14  Position 8  29 W  53 V max.  550mA max.  max 13/14  Position 9  32 W  53 V max.  600mA max.   max 13/14  Position 10  32 W  49 V max.  650mA max.   max 12/13  Position 11  32 W  46 V max.  700mA max.   max 12  Position 12  32 W  42 V max.  750mA max.   max 12  Position 13  32 W  40 V max.  800mA max.   max 10 Efficiency depending of the power: >88%     All tci Jolly converter can be connected to each other via sync-cable. Thus, the control over only one button is possible. Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves). Button and installation materials are not included in delivery.   For detailed description please refer to the data sheet.