Universal Radio Switch 2-/4-Channel 55x55 with Wireless EnOcean Radio Technology This battery-free EasySens® radio switch can be used to control lights and blinds or roller shutters using EnOcean wireless technology. The device is easily and flexibly installed on glass and plaster using adhesive pads or screws. Depending on the variant, one or two switch rockers (2-/4-channel) are available for operation, with the data being transmitted immediately when the switch is pressed. In addition, the power supply is ensured by an integrated electrodynamic energy generator. The wireless switch is also available in different housing colors. Furthermore, a luminescent intermediate frame (yellow, green luminescent) is available. Product overview / features: Universal wireless switch with EnOcean (IEC 14543- 3-10) radio technology with a transmission power <10mW in different variations: Design and functionality: lighting, blinds/shutters Operating elements: 2-channel , 1 switch and 4-channel, 2 switches Housing colors: aluminum, anthracite, Jung aluminum, pure white brilliant, pure white matt Robustness against temperatures from -25° C to 65° C and up to 85% humidity Maintenance-free electrodynamic energy generator for power supply Suitable for all common switch ranges with 55x55 mm inner diameter, e.g. Berker, Busch-Jaeger, Gira, Jung, Merten and Peha (Please specify the desired intermediate frame when ordering.) Notes on operating functions and assembly: The actuation force of each button is 7 N, with a actuation path of 2 mm is covered. The corresponding number of switching cycles is greater than 50,000. During assembly, it is possible to glue the switch frame directly to the wall or to screw it onto existing flush-type boxes. Make sure that t he surface is flat and free of dust in order to avoid malfunctions. Plastic frame is part of the delivery content. On demand, you can order frames in other materials like glass and metal for an additional charge. References: General information about easySens radio and airConfig software Overview of EnOcean radio telegrams Technical Data: Purpose Lighting, scene and shading control Functions Lighting Blind / roller shutter Operating functions Light on / off Blinds up / down Labeling {O / I} {?/?} Operating elements 2-channel 4-channel 2-channel 4-channel Radio technology EnOcean (IEC 14543-3-10), EEP F6-02-02 (RPS) Transmission power <10 mW Frequency 868 MHz Data transmission / Transmission interval Immediately on using the switch Operating range temperature - 25° C to + 65° C Operating range humidity Max. 85% rH, non-condensing Power supply Maintenance-free electrodynamic energy generator Enclosure PC Housing color Each aluminum, anthracite, Jung aluminum, pure white brilliant or pure white matt Mounting Flat on the surface, glue or screw Delivery content Incl. 2 labels with read-out transmission ID, including adhesive foil for mounting Dimensions (LxWxH) 73x73x15 mm Packaging Sustainable folding carton Dimensions of packaging (LxWxH) 90x90x35 mm Specification - Suitable switch ranges from popular manufacturers: Berker Berker S.1 with intermediate frame, Berker B.7 glass Busch-Jaeger Busch-Jaeger Busch-balance & reg; SI with intermediate frame Gira Gira E2 with intermediate frame, Gira E3 with intermediate frame, Gira Esprit with intermediate frame, Gira Event with intermediate frame, Gira area switch with intermediate frame, Gira Standard 55 with intermediate frame Jung Jung A 500 with intermediate frame, Jung A 550 with intermediate frame, Jung A creation with intermediate frame, Jung AS 500 with intermediate frame Merten Merten 1-M with intermediate frame, Merten Antik with intermediate frame, Merten Artec with intermediate frame, Merten Artec stainless steel with intermediate frame, Merten Atelier-M with intermediate frame, Merten M-Plan with intermediate frame, Merten M-Pure with intermediate frame, </ li> Merten M-Smart with intermediate frame Peha Peha Aura, Peha Aura glass   For more information, please refer to the data sheet in the download tab.

AL-500-00 DALI Eingangsmodul 4-Kanal The AL-500-00 DALI input module 4-channel is a universal module for reading in 4 potential-free switching contacts via DALI (V1). The device is supplied from the DALI bus. The signals are evaluated via the BL-204-10-868 EVG FLEX, EnOcean DALI controller and thus integration into the Enocean network. Technical Data:   DALI Slave   Number 1 Current consumption typ. 4,1 mA Input voltage DALI 16V DC (+/-5%) Galvanic isolation No Environment conditions   Operating temperature 0°C to +50°C Storage temperature -20 °C to +70°C Humidity 10% to 95%, non condensing Examinations / Approvals In general: 2011/65/EU RoHS Directive EMC immunity: according to EN 61000-6-2 EMC interference: according to EN 61000-6-3, EN 61000-6-4 Remove further data from our download tab Application example AL-500-00 with EnOcean DALI controller BL-204-10-868 EVG FLEX The following video shows the use of an AL-500-00 DALI 4-channel input module on a BL-204-10-868 EVG FLEX. The AL500-00 is connected to the DALI bus and is supplied by it. The first input A is connected with a conventional light switch. On the left side of the picture you can see the software BL-PC-FLEX-2. This has been started and the EnOcean USB stick is connected (COM field highlighted in green). If the button is now pressed, it first appears on the right in the EnOcean Explorer as "available". With a double click this is "projected". The key press corresponds to “A1.” The ON/OFF/DIM function is configured as DALI BROADCAST for the A1 key and the configuration is loaded into the EnOcean DALI controller BL-204-10-868 EVG FLEX. At the end you can see the desired functionality when you press the button. .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} AL-500-00 with BL-204-10-868 EVG FLEX V1   Video from Deuta Controls on the AL-500-00 with BL-204-10-868 EVG FLEX V1

NEW! EnOcean DALI Gateway Flex in installation housing, series BL The gateway establishes an EnOcean radio connection from EnOcean buttons to your DALI luminaires. So you can control/dim your DALI lighting via EnOcean radio. Special feature: Freely configurable! The Gateway Flex can be freely programmed by the user (individual button assignments, light scenes etc.) Integrated DALI power supply for up to ten slaves (maximum output current: 20mA). Installation housing: 4x socket output 5-pin WIELAND 230V AC + DALI. Useful for existing buildings and missing DALI bus from the switching unit to the luminaire unit. Further highlights: 230V Supply voltage No configuration tool required for commissioning Internal antenna Video Tutorial: PC software BL-201-FLEX for configuring the BL-201 EnOcean DALI gateways Technical Data: DALI Master Number 1 Master Output current Max. 34mA Output voltage 16V DC (+/- 5%) Galvanic isolation yes EnOcean Master Number 1 Master (bidirectional) Transceiver TCM310 Send / Receive yes / yes Antenna Integrated     Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature +5°C to +50°C Humidity 10% to 95%, non-condensing Compatible EnOcean wireless buttons can be found here.

BL-202-10-868 EVG FLEX, EnOcean-DALI-Controller Freely configurable DALI control via the PC tool BL-PC-FLEX-2 (not included). Conduct the DALI commissioning wirelessly and, together with switches, motion detectors and daylight sensors, simply convert the customer's requirements into a solution. The EnOcean DALI controller type BL-202-10-868 EVG FLEX offers a DALI master as well as an integrated DALI power supply for the direct connection of up to 15 slaves (out max. = 30 mA) without the need for a separate DALI power supply. In addition, an EnOcean radio transceiver is integrated. These features enable the simple and easy combination of DALI ballasts or DALI LED drivers and light switches with wireless EnOcean technology. The device is supplied with 230 V AC mains voltage. It offers freely configurable functions via the PC tool BL-PC-FLEX-2 (formerly BL-PC-FLEX) (not included). Product characteristics: 230 V AC supply voltage 1x DALI Master Integrated DALI power supply for up to 15 DALI slaves (Iout max. = 30 mA) 1x EnOcean (TCM310) Internal antenna PC configuration tool BL-PC-FLEX-2 for wireless configuration of control functions Mounting in housings or profiles Technical Data: DALI Master Number 1 Master Output current DALI max. 30 mA via integrated power supply (max. 15 slaves) Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Master  Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Frequency range used 868.0 - 868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Transmit/receive center frequency 868.3 MHz / ASK (EnOcean) Recipient category according to EN 300200 2   Environmental conditions Supply voltage 230V AC  Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature -20°C to +70°C Humidity 10% to 95%, non condensing Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 Take further data from our download-tab.

BL-202-40-868 EVG TUNABLE WHITE, EnOcean-DALI-Controller The EnOcean DALI controller type BL-202-40-868 EVG TUNABLE WHITE offers a DALI master and a DALI power supply for the direct connection of up to 15 DALI ballasts (Iout max. 30mA) without the need for a separate DALI power supply. In addition, an EnOcean radio transceiver is integrated. These features enable the simple and easy combination of DALI ballasts or DALI LED drivers and light switches with wireless EnOcean technology. The device is supplied with 230V AC mains voltage. The BL-202-40-868 EVG TUNABLE WHITE offers a fixed function for switching, dimming and changing the colour temperature (DALI DT8) via a double rocker. Wippe A : Switching and dimming Rocker B : Changing the color temperature Up to 10 EnOcean switches can be taught to the controller at the same time. Highlights function: brightness (ON/OFF/DIM) and colour temperature (DALI DT8, TC) can be set via a double rocker switch  230 V AC supply voltage 1x DALI Master Integrated DALI power supply for up to 15 DALI slaves (Iout max. = 30 mA) 1x EnOcean (TCM310) Internal antenna Installation in housing or profiles Fixed function: switching, dimming and changing the colour temperature -(DALI DT8) via a double rocker, no addressing or PC tool required Technical data DALI Master Number 1 Master Output current DALI Max. 30mA Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Master (bi-directional) Transceiver TCM310 868 MHz Transmit / receive Yes / yes Antenna Integrated Transmit/receive center frequency  868.3 MHz / ASK (EnOcean) Frequency range used 868.0-868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Recipient category according to EN 300200 2 Environmental conditions Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C bis +50°C Storage temperature +5°C bis +50°C Humidity 10% bis 95%, nicht kondensierend Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6

BL-202-FLEX-2 STARTERKIT The BL-202-FLEX-2 starter kit provides a quick and cost-effective introduction to the practical work with the freely configurable FLEX options of the proven BL-201 and BL-202 EnOcean DALI controllers / light controllers. The kit contains the following components (see screenshot above): BL-202-10-868 EVG FLEX, EnOcean DALI controller, #11329, 1 piece BL-PC-FLEX-2, PC software, Windows, USB stick, #11228, 1 piece Radio surface scanner pure white EnOcean, #11051, 1 piece EnOcean USB stick 868 MHz, #11227, 1 piece slotted screwdriver 0. 4 x 2. 0, #11145, 1 piece Power supply cable with Euro plug, 2,0m , #11230, 1 piece In addition to a DALI electronic ballast with an associated light, or an LED strip with a corresponding DALI driver module, everything is included in the kit that is necessary for an easy start. Piece Technical data DALI Master Number 1 Master Output current DALI Max. 30mA Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Transmit/receive center frequency  868.3 MHz / ASK (EnOcean) Frequency range used 868.0-868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Recipient category according to EN 300200 2 Environment conditions  Supply voltage 230V AC  Power consumption Typ. 0,8W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature -20C to +70°C Humidity 10% bis 95%, nicht kondensierend Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 For further information, please refer to the data sheet in the Download tab.

BL-204-10-868 EVG FLEX EnOcean-DALI-Controller The type BL-204-10-868 EVG FLEX offers a DALI master and an integrated DALI power supply for the direct connection of up to 15 slaves (Iout max. = 30 mA), without the need for a separate DALI power supply. In addition, an EnOcean radio transceiver is integrated. These features allow the easy and hassle-free combination of DALI ballasts or DALI LED drivers and light switches with wireless EnOcean technology. The device is supplied with 230 V AC mains voltage. The DALI bus of the BL-204-10-868 EVG FLEX can be accessed either additionally or alternatively via the AL-500-00 DALI 4-channel input module (Art. no. 12 002) up to 4x 4 = 16 wired switches or switches. buttons are read in and used locally for the control. In addition, this switching information is sent via EnOcean as RPS radio telegrams to control external actuators or to link other lighting controls. It is free configurable with our PC software BL-PC-FLEX-2, and provides the following Features: 230 V AC power supply voltage 1x DALI Master Integrated DALI power supply for up to 15 DALI Slaves (Iout max. = 30 mA) 1x EnOcean Master, bi-directional (TCM310) Internal antenna PC Configuration tool BL-PC-FLEX-2 to configure DALI and EnOcean functionality (not included) To be mounted directly into luminaires and profiles Dimensions: 144 x 21 x 18 mm New: Supports AL-500-00 DALI input module 4-channel, for wired light switches / push buttons / motion detectors etc. Remove further data from our download tab Application example AL-500-00 BL-204-10-868 EVG FLEX The following video shows the use of an AL-500-00 DALI 4-channel input module on a BL-204-10-868 EVG FLEX. The AL500-00 is connected to the DALI bus and is supplied by it. The first input A is connected with a conventional light switch. On the left side of the picture you can see the software BL-PC-FLEX-2. This has been started and the EnOcean USB stick is connected (COM field highlighted in green). If the button is now pressed, it first appears on the right in the EnOcean Explorer as "available". With a double click this is "projected". The key press corresponds to “A1.” The ON/OFF/DIM function is configured as DALI BROADCAST for the A1 key and the configuration is loaded into the EnOcean DALI controller BL-204-10-868 EVG FLEX. At the end you can see the desired functionality when you press the button. .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} AL-500-00 with BL-204-10-868 EVG FLEX V1   Take further data from our download-tab

BL-204-FLEX-2 STARTERKIT Das BL-204-FLEX-2 Starter-Kit ermöglicht einen schnellen und kostengünstigen Einstieg in die praktische Arbeit mit den frei konfigurierbaren FLEX-Optionen der bewährten BL-201 und BL-202 EnOcean-DALI-Controller / Lichtsteuerungen. Im Kit enthalten sind folgende Komponenten (s. Abbildung oben): BL-202-10-868 EVG FLEX, EnOcean-DALI-Controller, #11329, 1 Stück BL-PC-FLEX-2, PC-Software, Windows, USB-Stick, #11228, 1 Stück Funk Flächentaster reinweiß EnOcean, #11051, 1 Stück EnOcean USB-Stick 868 MHz, #11227, 1 Stück Schlitzschraubendreher 0.4 x 2.0, #11145, 1 Stück Netzanschlussleitung mit Eurostecker, 2,0m , #11230, 1 Stück Außer einem DALI EVG mit zugehöriger Leuchte, oder einem LED-Streifen mit entsprechendem DALI Treiberbaustein, liegt somit dem Kit alles bei was für den einfachen Start erforderlich ist. Prüfungen / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 Entnehmen Sie weitere Daten aus unserem Download-Tab.

BL-PC-FLEX-2 SETUPKIT PC software for the configuration of the freely configurable "FLEX" lighting controllers The BL-PC-FLEX-2 Setup Kit enables practical work with the freely configurable FLEX options of the proven BL-201 and BL-202 EnOcean DALI controllers / light controllers. The kit contains the following components (see screenshot above): BL-PC-FLEX-2, PC software, Windows, on USB stick, # 12229, 1 piece EnOcean USB flash drive 868 MHz, # 11227, 1 piece Technical Data:   EnOcean Master Number 1 Master  Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Frequency range used 868.0 - 868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Transmit/receive center frequency 868.3 MHz / ASK (EnOcean) Recipient category according to EN 300200 2   Environmental conditions Supply voltage 5V DC via USB Power consumption Typ. 0,1W Operating temperature -20°C to +50°C Storage temperature -20°C to +50°C Humidity 10% to 95%, non condensing Tests / Standards: DIN/EN 55032:2012 EN 55035:2017 EN 301489-3 EN 61000-3-2:2014 EN 61000-3-3 EN 300220-2 EN 62368-1 EN 62479000-4-5 EN/IEC 61000-4-6 For a simple overview of the functionality we recommend the following video: Video instructions for BL-PC-Flex software (#11228) for the BL-201/202 series FLEX EnOcean DALI controllers .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} PC software BL-201-FLEX for configuring the BL-201 EnOcean DALI gateways   Video language is german.

Bridge digitalSTROM-DALI-EnOcean-hue from Plan44 This improved version 2 has an external antenna (SMA), power supply using a standard USB micro power supply or via Ethernet (with a separate PPoE kit) and is more energy efficient.By using the new digitalSTROM virtual device connector technology to seamlessly integrate new devices, they work just as easily for users as normal digitalSTROM components.The P44-DSB-DEH2 device connects up to 64 dimmable DALI lights, many radio buttons, sensors and actuators and Philips "hue" color LED lights.To expand room climate control (EnOcean), office lighting (DALI), modern LED lighting of various types (DALI, hue) and freely positionable radio light buttons (EnOcean), the P44-DSB-DEH2 is a cost-effective way to achieve this.It only needs a P44-DSB-DEH2 to connect a variety of third-party components that ideally complement the digitalSTROM components.The P44-DSB-DEH2 firmware can be updated with a simple push of a button to receive support for new devices, new features and general improvements. DALI - up to 64 dimmable lights on a 2-wire bus DALI is a proven and widespread industry standard (IEC 62386) for lighting. Up to 64 DALI "slave" devices can be connected with a two-wire bus. The bus is powered and controlled by the P44-DSB-DEH2 as a DALI "master". Unlike many DALI "master" devices, the P44-DSB-DEH2 does not require manual configuration of the DALI devices, but automatically recognizes all connected devices and makes them available as digitalSTROM-compatible devices. Compatible DALI devices are available from many manufacturers, such as Unidim, Osram, Tridonic, Meanwell, TCI, Helvar and many others.DALI control devices (e.g. presence detectors or brightness sensors) are not supported and can disrupt operation via digitalSTROM. Instead, use appropriate digitalSTROM terminals or EnOcean sensors. EnOcean - wireless self-sufficient components EnOcean is a technology for wireless, usually self-supplying ("energy harvesting") buttons, sensors and actuators.The P44-DSB-DEH2 has a built-in EnOcean radio module (TCM310) to receive data from EnOcean buttons and sensors and to transmit commands to EnOcean actuators such as heating valves. The P44-DSB-DEH2 firmware automatically recognizes the EEP (enocean equipment profile) of the component in order to integrate the various devices in digitalSTROM accordingly. For example, Sensors for climate data as blue digitalSTROM components and buttons function as light switches as standard, but can also be used for other functions. hue - coloured LED lights, wirelessly remote controlled "hue" lights are coloured LED lamps from Philips, which can be controlled wirelessly via smartphone apps or third-party software.P44-DSB-DEH2 lets "hue" lights become part of the digitalSTROM light scenes. Create your multi-coloured light scenes and simply call them up by pressing the light button. The P44-DSB-DEH2 recognizes and connects the "hue" bridge at the push of a button. Once connected, all "hue" lights appear as (yellow) digitalSTROM light components. The normal hue functionality remains unchanged, you can still control the lights with the mobile hue app, via the hue cloud or with third-party applications. The single-colour hue "lux" lights are also supported.You can find more information about this product in the download tab.

BL-201-18-868 EUTRAC FLEX, EnOcean DALI controller for EUTRAC light rail with data bus The proven series of BL-201 EnOcean DALI gateways for flush-mounted installation or integration in luminaires offers the simplest way of connecting wireless communication based on EnOcean with DALI for connecting lighting technology. This product now supplements the series with a freely configurable lighting controller with the following essential features: Simple snapping into the DALI light rail 230 V AC supply voltage via light rail 1x DALI master Integrated DALI power supply for up to 15 DALI slaves (Iout max. = 30 mA) 1x EnOcean master, bidirectional (TCM310) Internal antenna PC configuration tool BL-PC-FLEX for wireless configuration of the control functions Useful for existing buildings and missing DALI bus from the switching unit to the luminaire unit. The function of the gateways with FLEX option is configured using the BL-201-FLEX PC software.In contrast to the other software options, instead of the fixed functions / assignments, e.g. groups and scenes can first be configured on the DALI. Then the assignment of one or more switches / rockers to the individual groups or scenes. The communication and The gateways are programmed wirelessly via an EnOcean USB stick.For beginners we recommend the starter kit, consisting of software and USB stick: #11228, BL-PC-FLEX setup kit for Windows PC

Universal EasySens Radio Switch 2-/4-Channel BJ 63x63 with Wireless EnOcean Radio Technology This universally applicable EasySens® radio switch is used to control a status change of lights, blinds or shutters. The use of lighting and shading control is enabled by the wireless EnOcean radio technology. In addition, there is a simple and flexible installation/mounting on glass and plaster using adhesive pads or screws. The EnOcean wireless switch is ideal for Busch-Jaeger switch ranges with 63x63 mm inner diameter. Depending on the variant, one or two switch rockers (2-/4-channel) are available as operating elements. Furthermore, the power supply is ensured by an integrated electrodynamic energy generator. The device is also available in different housing colors. Product Overview / Features: Universal wireless switch with EnOcean (IEC 14543-3-10 ) radio technology with a transmission power <10mW in different variations: Design and functionality: lighting, blinds / shutters Operating elements: 2-channel, 1 switch and 4-channel, 2 switches Housing colors: aluminum silver, anthracite, ivory white, studio white Maintenance-free electrodynamic energy generator for power supply Robustness against temperatures from -25° C to 65° C as well as up to 85% humidity Suitable for switch ranges of the manufacturer Busch-Jaeger with 63x63 mm inner diameter, also compatible with: Busch-Jaeger solo® future® linear Bush-axcent® carat® (on request) Notes on operating functions and assembly: The actuation force is is 7 N, whereby an actuation rahge of 2 mm is covered. The corresponding number/quantity of operating switching cycles is greater than 50,000. During assembly, it is possible to glue the switch frame directly to the wall or to screw it onto existing flush-type boxes. Make sure that the surface is flat and free of dust in order to avoid malfunctions. Plastic frame is part of the delivery content. On demand, you can order frames in other materials like glass and metal for an additional charge. References: General information about easySens® radio and airConfig software Overview of EnOcean wireless telegrams Technical Data: Purpose Lighting, Scene and Shading control Functions Lighting Blind / roller shutter Operating functions Light on / off Blinds up / down Labeling {O / I} {?/?} Control elements 2-channel 4-channel 2-channel 4-channel Radio technology EnOcean (IEC 14543-3-10), radio telegram EEP F6-02-02 (RPS) Transmission power <10 mW Frequency 868 MHz Data transmission / transmission interval Immediately on using the switch Operating range temperature - 25° C to + 65° C Operating range humidity Max. 85% rH, non-condensing Power supply Maintenance-free electrodynamic energy generator Enclosure PC Housing color each aluminum silver, anthracite, ivory white, studio white (studio white matt and black matt on request) Mounting Flat on the surface, glue or diagonally Delivery Content Incl. 2 labels with read out transmission ID, including adhesive foil for mounting Dimensions (LxWxH) 73x73x15 mm Packaging Sustainable folding carton (case packaging) Dimensions of packaging (LxWxH) 90x90x35 mm Specification - Suitable switch ranges from the manufacturer: Busch-Jaeger Busch-Jaeger Busch-axcent®, Busch-Jaeger carat®, Busch-Jaeger future® linear, Busch-Jaeger solo® For further information, please refer to the data sheet in the download tab.

Lichtschalter EnOcean, Einfach- und Doppelwippe, 868 MHz Funkübertragung auf Basis von EnOcean, 868 MHz Einfachste Montage, auf vorhandener Unterputzdose oder auf glatter Fläche Ideale Nachrüstlösung, keine Leitung erforderlich Keine Batterien, absolut wartungsfrei Kompatibel mit allen Produkten der Serie BL-201 (feste Funktion + FLEX) Dem Schalter liegen eine einfache sowie eine doppelte/geteilte Wippe bei, kann je nach Bedarf durch Sie gewechselt/montiert werden.

BL-201-12-868 ERCO FLEX, EnOcean-DALI-Controller The EnOcean DALI controller BL-201-12-868 ERCO FLEX is used to control luminaires with a DALI interface by means of a wireless light switch. Pushbutton based on EnOcean radio technology, and was specially developed as an accessory for the ERCO rail system. The controller offers a DALI Master with integrated DALI power supply for the direct connection of up to 17 luminaires / slaves (Iout max. = 34 mA). In addition, an EnOcean radio transceiver is integrated, via which one or more light switches or sensors communicate with the controller. The device is simply mounted into the rail system like a luminaire and is immediately ready for use. The power supply is via the power rail with 230 V AC mains voltage.  The EnOcean DALI controller type BL-201-12-868 ERCO FLEX is wirelessly configured via the PC software BL-PC-FLEX-2 via an EnOcean USB stick. He currently supports, among other things. the use of light switches, light switches, motion sensors and daylight sensors based on EnOcean. Highlights Simple locking into the DALI light rail 230 V AC supply voltage via light rail 1x DALI Master Integrated DALI power supply for up to 17 DALI slaves (Iout max. = 34 mA) 1x EnOcean (TCM310) Internal antenna PC configuration tool BL-PC-FLEX for wireless configuration of control functions Technical data DALI Master Number 1 Master Output current DALI Max. 34mA Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Transmit/receive center frequency  868.3 MHz / ASK (EnOcean) Frequency range used 868.0-868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Recipient category according to EN 300200 2 Environment conditions  Supply voltage 230V AC  Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature -20C to +70°C Humidity 10% bis 95%, nicht kondensierend Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 For further information, please refer to the data sheet in the Download tab.

BL-201-FLEX-2 STARTERKIT The BL-201-FLEX-2 starter kit provides a quick and cost-effective introduction to the practical work with the freely configurable FLEX options of the proven BL-201 and BL-202 EnOcean DALI controllers / light controllers. The kit contains the following components (see screenshot above): BL-201-10-868 UP FLEX, EnOcean DALI controller, #11214, 1 piece BL-PC-FLEX-2, PC software, Windows, USB stick, #11228, 1 piece Radio surface scanner pure white EnOcean, #11051, 1 piece EnOcean USB stick 868 MHz, #11227, 1 piece slotted screwdriver 0. 4 x 2. 0, #11145, 1 piece Power supply cable with Euro plug, 2,0m , #11230, 1 piece In addition to a DALI electronic ballast with an associated luminaire, or an LED strip with a corresponding DALI driver module, the kit therefore comes with everything required for easy start-up Technical Data: DALI Master Number 1 Master Output current DALI max. 34 mA via integrated power supply (max. 17 slaves) Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Master (bi-directional) Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Frequency range used 868.0 - 868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Transmit/receive center frequency 868.3 MHz / ASK (EnOcean) Recipient category according to EN 300200 2   Environmental conditions Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature -20°C to +70°C Humidity 10% to 95%, non condensing Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 Take further data from our download-tab.

EnOcean DALI BL-201 or ERCO, track lightrailThe EnOcean DALI controller BL-201-05-868 ERCO 3xGRP 1xSCENE from the manufacturer Deuta Controls is used to control luminaires with DALI interface by means of wireless light switches or pushbuttons based on EnOcean wireless technology, and was specially developed as an accessory for the ERCO light track system. Fixed function lighting control: 3x DALI group, ON / OFF / DIM each, and 1x DALI scene store / recallThe controller provides a DALI master with an integrated DALI power supply for direct connection of up to 17 DALI ballasts/slaves. (Iout max.= 34 mA). In addition, there is an integrated EnOcean wireless transceiver to communicate with one or more light switches.The device can be mounted like a lamp directly into the light track and is ready for operation immediately. The controller is supplied by the light rail with 230V AC.  Technical data Deuta Controls DALI BL-201-05-868 Supply voltage: 230 V AC / 50 Hz Rated current: 12 mA @ 230 V AC Power consumption: typ. 2,8 W, max. 4,0 W Output: DALI+, DALI-, typ. 16 V DC / max. 34 mA Transmit-/ receive center frequency: 868.3 MHz / ASK (EnOcean) Occupied frequency band: 868.0 - 868.6 MHz Maximum transmission power: typ. 3 dBm @ 868.300 MHz EN 300 220 receiver category: 2 Terminals: none, Contacting takes place via the light rail Housing: UL-V0, light grey Protection class: IP20 / only for indoor use Ambient temperature: +5 to +50 °C Storage temperature: +5 to +50 °C Weight: 150 g Interfaces / Short description of the Enoceanlight track adapter Supply voltage: 230 V AC Power supply out of the light rails DALI Master:The BL-201-05-868 EZ offers a DALI Master according to the DALI specification. In addition, a DALI power supply for the direct connection of up to 20 luminaires with DALI interface or DALI slaves is integrated in the device (Imax = 40 mA). There is no need for a separate DALI power supply. Contact is made via the ERCO or Zumtobel busbar. EnOcean Master / bi-directional:The integrated transceiver TCM310 enables communication with switches according to the EnOcean profile specification EEP 2.1 Service button / Service LED: The BL-201-05-868 has a service button to teach one or more EnOcean rockers or double rockers.Various status information is displayed via the red service LED integrated on the housing side (see below). Function of the gateway:The Gateway Controller currently offers following functions: Double rocker for controlling up to 20 DALI luminaires, each assigned to one of three groups 3 buttons of the double rocker for controlling the lights in groups 0, 1 and 2, on / off / dimming respectively 1 button for switching off all groups / for saving a scene / for calling up the scene  Below you will find the description of the function when pressing the respective button: Scene short: Switches off all consumers, if they are currently switched on. Scene short: Recalls the saved scene if all lights are currently off. Scene long, >5 sec.: Saves the currently set brightness values of all luminaires of all groups as a scene. Grp 0 / 1 / 2 long: Dimming (darker) all luminaires of the respective group until the switch is released or 0% brightness is reached. Grp 0 / 1 / 2 long: Dimming (brighter) all lights of the respective group until the switch is released or 100% brightness is reached. Grp 0 / 1 / 2 short (<=0.5 sec.): Switching on all luminaires of the respective group, if these are currently switched off. Grp 0 / 1 / 2 short (<=0.5 sec.): Switching off all luminaires of the respective group, if these are currently switched on. Compatible EnOcean wireless push buttons can be found here

NEW! EnOcean DALI Gateway BL-201 This new gateway establishes a wireless connection from EnOcean switches to your DALI luminaires. Thus, you can control / dim your lights via DALI and EnOcean radio. Special feature: integrated DALI power supply for the direct connection of up to 10 slaves (Iout max.= 20 mA), without a separate DALI power supply. Useful for already existing building and lack of DALI bus from the switching unit to the light unit. More highlights: 230V supply voltage Internal Antenna 4 different software options available Software optiones: Short text Description BL-201-00-868 Option 00: On / Off / Dim BL-201-01-868 Option 01: Cold / Warm BL-201-02-868 Option 02: Device Type 8 / RGBW BL-201-03-868 Option 03: RGB Please refer to the Data sheet for full descripiton. Technical Data of the Enocean DALI gateway: DALI Master Number 1 Master Output current DALI Max. 20mA Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Master (bi-directional) Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated     Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature +5°C to +50°C Humidity 10% to 95%, non condensing   Data sheet (PDF) EnOcean DALI Gateway download User manual (PDF) download   Compatible EnOcean DALI gateway and wireless switches can be found here.

BL-201-10-868 UP FLEX, EnOcean-DALI-Controller Freely configurable DALI control via the PC tool BL-PC-FLEX (not included). Conduct the DALI commissioning wirelessly and, together with switches, motion detectors and daylight sensors, simply convert the customer's requirements into a solution. The EnOcean DALI controller type BL-201-10-868 UP FLEX offers a DALI master as well as an integrated DALI power supply for the direct connection of up to 17 slaves (out max. = 34 mA) without the need for a separate DALI power supply. In addition, an EnOcean radio transceiver is integrated. These features enable the simple and easy combination of DALI ballasts or DALI LED drivers and light switches with wireless EnOcean technology. The device is supplied with 230 V AC mains voltage. It offers freely configurable functions via the PC tool BL-PC-FLEX-2 (formerly BL-PC-FLEX) (not included). Product characteristics: Integrated DALI power supply for up to 17 DALI slaves (Iout max. = 34 mA) PC configuration tool BL-PC-FLEX-2 for wireless configuration of control functions Mounting directly in a standard UP built-in socket Technical Data:   DALI Master Number 1 Master Output current DALI Max. 20mA Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Master (bi-directional) Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Frequency range used 868.0 - 868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Transmit/receive center frequency 868.3 MHz / ASK (EnOcean) Recipient category according to EN 300200 2   Environmental conditions Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature -20°C to +70°C Humidity 10% to 95%, non condensing Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 Compatible EnOcean radio buttons can be found here. .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} Commissioning of an EnOcean DALI controller type BL-201-10-868 UP FLEX (Video language german) Further information as well as the instructions for use and installation can be found in the download tab.

EnOcean DALI-2 MC control module capable of connecting 4 EnOcean wireless pushbuttons to DALI | 86463327 Each of the 4 EnOcean Inputs can be individually configured with switching functions, effective range and DALI commands. Additionally to standard functions like Scene recall, dimming, switching and more, the device is capable of Setting the Colour temperature, sequences and dynamic Scenes as well as user defined command lists. The device is designed to fit a flush-type installation box. Variants: 86463327-app: Here the application Controller is activated. Additionally to Standard DALI commands, the DALI DT8 TC and RGB/W Control is supported. The device can also be set to instance mode with the DALI Cockpit PC Software. 86463327-int: This variant is set to instance mode (no direct DALI Control commands) for Integration into higher-level Building managements Systems from e.g., Beckhoff or WAGO. The application Controller can be activated with the DALI Cockpit PC Software. 86463327-NFC: In this Version, Settings are adjustable by using a NFC Ready Smartphone and the Lunatone NFC App, in Addition to Standard configuration via the DALI Cockpit PC Software.   Type EnOcean DALI-2 MC EnOcean DALI-2 MC Integration EnOcean DALI-2 MC NFC Art. Nr. 86463327-app 86463327-int 86463327-NFC Factory Default setting app-controller active instances active app-controller active Electrical data       Supply by DALI Bus Typical current consumption 6 mA (DALI) Input type 4 EnOcean - wireless Output type DALI, DALI-2, Multimaster Technical data   Ambient temperature -20°C...+75°C Protection degree housing IP40, terminals IP20 Wire size: solid core 0,5 … 1,5mm² (AWG20 … AWG16) Dimensions (LxWxH) 59mm x 33mm x 15mm Case Type flush-type Installation box For more Information, please refer to the data sheet in the download tab.

Handheld Transmitter 4-Channel for Remote Control of EnOcean Receivers This cost-efficient EasySens® handheld transmitter can be used to implement lighting control via EnOcean radio. The device is suitable for a variety of  applications, such as room climate control, lighting control, scene control and shading control. Four buttons are available for operation, with data being transmitted immediately when one button is pressed. Another highlight is the integrated electrodynamic energy generator, regulating the power supply. Product Overview / Features: Handheld transmitter with EnOcean (IEC 14543-3-10) radio technology with a transmission power <10mW Robustness against temperatures from -25°C to 65°C as well as up to 85% humidity Maintenance-free electrodynamic energy generator for power supply Operation via 4 buttons (4-channel) with labeling A to D Notes on operating functions: The actuating force of each button is 7 N, with an actuating travel of 2 mm. The corresponding number of switching cycles is greater than 50,000. Further References: General information about easySens® radio and airConfig software Overview of EnOcean radio telegrams Technical Data: Intended use Room climate, lighting, scene and shading control Radio technology EnOcean (IEC 14543-3-10), EEP F6-02-01 (RPS) Transmitting power <10 mW Frequency 868 MHz, 902 MHz, 928 MHz Operating elements 4 buttons (4-channel) Data transmission Immediately when button is pressed Transmission interval When switch is pressed Operating range temperature -25°C to 65°C Operating range humidity Max. 85% rH, non-condensing Power supply Maintenance-free electrodynamic energy generator Color Black, light gray Dimensions (LxWxH) 82x50x21 mm Type of packaging Sustainable folding carton Dimensions packaging (LxWxH) 90x90x35 mm For more information, please refer to the data sheet in the download tab.

EnOcean button without battery by GIRA Switch off your light without a battery with the EnOcean button by GIRA, which generates its energy by means of a piezo. From the article options, select the desired EnOcean wireless pushbutton with single or double rocker - with or without suitable frame. Radio transmitter for transmitting switching, dimming or shutter commands to radio receivers of the EnOcean radio system.Battery-less device without external power supply. Transmission energy is generated from mechanical energy when the rocker is actuated. Technical specifications Ambient temperature: -25 °C bis +65 °C Humidity: 0 to 95% (no condensation) Radio frequency: 868,3 MHz Range open field: up to 300 m in buildings: approx. 30 m Mounting on device box or on smooth, even surfaces by screwing or gluing  delivery scope Radio wall-mounted transmitter, mounting plate, adhesive film (visual protection for glass surfaces) and adhesive dots for mounting on smooth, flat surfaces are included Alternative version with matching standard 55 frame (pure white glossy) available On request with sufficient order also in other colors / materials

BL-210-00-868 UP REPEATER, EnOcean-DALI-Repeater Enocean repeater for range Extension The EnOcean repeater type BL-210-00-868 UP REPEATER offers the possibility to extend the range of EnOcean Radio Signals. It offers the possibility to switch between Level 1 and Level 2 via the Service button on the device. Technical data: EnOcean Master Number 1 Master (bi-directional, in Repeater-Mode) Transceiver TCM310 Transmit / receive Yes / yes Antenna Internal Environment conditions   Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature +5°C to +50°C Humidity 10% to 95%, non condensing Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 Compatible EnOcean DALI gateway and wireless switches can be found here.  

SIEMENS EnOcean wall-mounted transmitter without symbol in single or double version Control your automation system / smart home with the EnOcean wall transmitter by the renowned company Siemens. With the battery-free and maintenance-free technology of the wireless pushbutton, you can install it perfectly in your system. Choose the variant that best suits your needs, with or without matching frames. Technical specifications Other bus systems: without Mounting type: surface-mounted Version: wall-transmitter insert Number of channels: 4 (2-fold) / 2 (1-fold) Material: plastic Material quality: Thermoplastic Surface: untreated Surface finish: matt Color: titanium white Dimensions (L x W): 71 x 71 mm Transparent: no Bus connection included: no RAL number (similar): 9010 General information about the frame (titan white) for horizontal and vertical arrangement Protection class: IP20 Dimensions: 90 mm x 90 mm

Gateway between EnOcean, hue und DALI (incl. Controller) Function and intended useThe P44-LC-DE light controller contains a DALI bus interface, an EnOcean radio module TCM310 and an embedded Linux module with Ethernet.With the P44-LC-DE light controller, small and medium-sized lighting controls with up to 64 DALI luminaires (monochrome, with adjustable white tone and full colour), Philips "hue" LED lamps and much more can be controlled (via the "hue" bridge) and any number of EnOcean radio buttons for operating the lights. If required, this can be upgraded to a fully-fledged digitalSTROM bridge later by software upgrade, and can thus be expanded to a complete digitalSTROM system. This universal lighting control device can be used to control many wireless pushbuttons, sensors and actuators as well as Philips "hue" colour LED luminaires with DALI luminaires e. g. via Enocean and vice versa. EnOcean - wireless energy self-sufficient components EnOcean is a technology for wireless, usually self-powered ("energy harvesting") buttons, sensors and actuators. The P44-LC-DE has a built-in EnOcean radio module (TCM310) to receive data from EnOcean buttons and sensors and to transmit commands to EnOcean actuators such as heating valves. The P44-LC-DE firmware automatically detects the device's EEP (enocean equipment profile) in order to integrate the various devices into the digitalSTROM. Thus, for example, Sensors for climate data as blue digitalSTROM components, and pushbuttons function as light switches by default, but can also be used for other functions. hue - coloured LED lights, wireless remote control "hue" luminaires and, for example, the well-known coloured LED lamps from Philips can be controlled wirelessly via smartphone apps or third-party software. Create your multi-colored light scenes, and simply call them up by pressing the light button.The P44-LC-DE detects and connects the "hue" -bridge by pressing a button. The normal hue functionality remains unchanged. You can still control the lights with the mobile hue app, via the hue cloud or with third-party applications. Also supported are the monochrome hue "lux" lights. Simple commissioning of the light controller P44-LC-DE: Find suitable location without metallic shielding for good radio range Connect network cable Connect devices with existing DALI bus (Attention: The P44 already has an integrated DALI PS!) Connect with the supplied USB 5V power adapter. (Alternative supply via PPoE possible) Connect to Philips hue Bridge (not included) as instructed Once all devices have been taught in, zones/rooms, switch assignments and scenes can be programmed via web access. If desired, events can be started via triggers or time control. Compatibility list for P 44-LC-DE on the manufacturer website Technical data Description: P44-LC-DE GTIN: 7640161170094 Manufacturer: plan44.ch, CH-8048 Zürich, plan44.ch/automation Dimensions: 138mm * 62mm * 31mm Weight: ca. 160g Operating temperature : 0..+50 °C, only in dry / closed rooms Network: 10/100 MBit/s Ethernet (RJ45 8P8C) Power supply: External power supply, USB, 5V/1A or PPoE 12-24V Power consumption: typ. 260mA @ 5V (1.3W) Antenna: external rod antenna Frequency: 868.300 Mhz (ASK) Radio standard: EnOcean 868MHz: ISO/IEC 14543-3-10 Radio signal: typ. 3dBm @ 868MHz Regulations: EMC 2014/30/EU, RED 2014/53/EU, RoHS 2011/65/EU, REACH (EC) No 1907/2006 More information about this product can be found in the download tab.