Indoor LED Stripe 24V Dual White 168LED/m 28W/m
Product information "Indoor LED Stripe 24V Dual White 168LED/m 28W/m"
Flexible 24V LED Stripes Dual White 168 LEDs/m, CRI90 28W/m
These powerful 24V LED Stripes in dual white version are suitable for indoor applications and are ideal for effect and general lighting. With our flexible dual-white 24V LED Stripes shelves, showcases or individual pieces of furniture can be brought to bear through targeted installation. They are ideal if you want to set a specific color temperature, as each LED has a cool white and a warm white chip. This technique not only allows predefined color temperatures, but also intermediate values.
In this version, the LED strip can be combined with all of our ALU profiles, which are also used for cooling.
For a sustainable operation, please note the information on the cooling of the LED strips in the data sheet.
The most important features
- The supply voltage of 24V allows a large selection of LED transformers
- The beam angle of 120 ° ensures large-area illumination
- The assembly density of 168 LEDs / m ensures good light distribution
- With a pitch of 71mm, you can shorten the LED bar as needed
- Thanks to the dual white technology, the color temperatures can be freely adjusted
Application examples:
- Effect lighting of cabinets, showcases and shelves
- Highlighting individual pieces of furniture through targeted lighting
- Lighting of railings
- Increase accessibility by illuminating stairs and other tripping hazards
- Atmospheric lighting in party cellars
- Indirect lighting of suspended ceilings
- Many other indoor applications possible
Technical data of the 24V Dualwhite LED stripes
| Type | STR-168270805 | STR-1682705807 |
| Electrical Data | ||
| Nominal voltage: | 24 Vdc | 24 Vdc |
| Nominal current: | 1.16 A / m | 1,16 A/m |
| Nominal power: | 28 W / m | 28 W/m |
| Efficiency: | 92.9 lm / W | 96,4 lm/W |
| Energy efficiency class: | G | F |
| Technical lighting data | ||
| Luminous flux: | approx. 2,600 lm/m combined | approx. 2,700 lm/m combined |
| approx. 1,120 lm/m warm white | approx. 1,275 lm/m warm white | |
| approx. 1,480 lm/m neutral white | approx. 1,420 lm/m cold white | |
| Light Color: | neutral white + warm white | cold white + warm white |
| Color temperature: | approx. 4,000 K neutral white | approx. 6,800 K cold white |
| approx. 1,900 K warm white | approx. 2,700 K warm white | |
| Color rendering index RA: | 90 neutral white + 90 warm White | 90 cold white + 90 warm white |
| Beam angle: | 120 ° | 120° |
| dimmable: | yes, via PWM (see data sheet) | yes, via PWM (see data sheet) |
| Lifespan & Ignition time | ||
| Nominal service life: | 30,000 h | 30.000 h |
| Ignition time: | < 0.5 s | < 0.5 s |
| Start-up time: | immediately | immediately |
| Temperatures | ||
| Operating temperature: | 55 ° C measured at the TC-point | 55° C measured at the TC-point |
| Storage temperature: | -15 to +40° C | -15 to +40°C |
| Dimensions | ||
| Length: | 1,000 mm | 1.000 mm |
| Width: | 12 mm | 12 mm |
| Height: | 2 mm | 2 mm |
| Division: | 71 mm | 71 mm |
| LED & nbsp; distance: | approx. 9 mm | approx. 9 mm |
| LED & nbsp; space: | approx. 3 mm | approx. 3 mm |
For further technical information, please refer to the data sheet
In our shop you will find a large selection of matching 24V LED Transformers
| Amount LEDs/m: | 168 LEDs/m |
|---|---|
| Application/IP-Code: | IP20 - IP44 (Indoor) |
| Color Temperature/Color: | Tuneable White |
| Constant Voltage: | 24V |
| Lamp shape: | flexible (stripes) |
| Power/Meter: | > 20W/m |
Login
sw_similar
Flexible LED strip 12V indoor white 60LEDs/m
€57.67*
Flexible LED strip 12V indoor with 60 LEDs/m
The affordable LED strip is suitable for indoor applications and are ideal for effect and room lighting. For example, the flexible LED strip 12V indoor can be used to illuminate shelves or showcases or to accentuate individual pieces of furniture through targeted attachment. In this design, the product can be combined with all ALU profiles offered by us, which simultaneously serve for cooling For a sustainable operation, please refer to the information on cooling the LED strips in the data sheet.
The most important features:
The supply voltage of 12V allows a large selection of power supplies and the use in the car interior
The beam angle of 120 ° ensures large-area illumination
The assembly density of 60 LEDs / m ensures a uniform and homogeneous light distribution
With a pitch of 50mm you can tailor the LED bar to your needs
Available color temperatures:
Cold white 5,700 - 6,300 K
Neutral white 4,200 - 4,600 K
Warm white 2,900 - 3,200 K
Warm white Comfort 2,500 - 2,750 K
Application examples:
Effect lighting of cabinets, cabinets and shelves
Emphasizing individual pieces of furniture through targeted lighting
Illumination in the vehicle interior, e.g. for motorhomes
Increase accessibility by illuminating stairs and other trip hazards
Atmospheric lighting in party cellars
Indirect lighting of suspended ceilings
Underground lighting of TV sets
Many more indoor applications possible
Technical data:
Description
Indoor Flexible
Power
12V dc
flux
390-440 lm / m depending on the color temperature
power
Cool white: 4 W/mNeutral white: 4 W/mWarm white: 4 W/mWarm white Comfort: 4.8 W/m
component density
60 LEDs/m
angle
120°
width
8 mm
height
2 mm
division
50 mm
For more technical information, please refer to the data sheet.
In our shop you will find a large selection of matching 12V power supplies
Flexible LED strip 24V RGB-W 4-channel 84 LEDs/m
€64.62*
Flexible 24V LED strip RGB-WW for indoor applications with 84 LEDs/mThese modern RGB-WW LED strips are suitable for indoor applications and are ideal for effect and ambient lighting. The advanced 4-channel technology not only gives you more pleasing and vibrant colors, but also gives you a wider color spectrum through the extra warm white channel. On these LED strips are 4-Chip LED's which integrate all 4 channels in one chip. These flexible 24V RGB-WW LED strips can be used to illuminate shelves or showcases. They are ideal if you want to set a specific color or if you want to stay flexible in color. In this version, the LED strip can be combined with all of our ALU profiles, which are also used for cooling.
The RGB-W bar is controlled by a common positive pole.
For a sustainable operation, please refer to the information on cooling the RGB-WW LED strips in the data sheet.
The most important features
The supply voltage of 24V allows a large selection of power supplies and use in truck interiors
The beam angle of 120° ensures large-area illumination
The assembly density of 84 LEDs/m ensures even and homogeneous light distribution
With a pitch of 71.5 mm you can adapt the LED strip to your needs
The RGB-W technology allows the colors to be freely adjusted
The additional white channel allows you to use the bar optionally for neutral lighting
Application examples:
Effect lighting and lighting of cabinets, showcases and shelves
Highlighting individual pieces of furniture through targeted lighting
Lighting in the truck interior eg in cabins or holds
Increase accessibility by illuminating stairs and other tripping hazards
Atmospheric lighting in party cellars
Indirect lighting of suspended ceilings
Backlighting of TV sets
Many other indoor applications possible
Technical data:
Version
Indoor, flexible
Power supply
24V DC
Farbtemperatur Kanal 4
Warmweiß 3100K
Luminous flux
1240 lm/m gesamt490 lm/m ww750 lm/m RGB gesamt190 lm/m rot449 lm/m grün111 lm/m blau
Power
24 W/m
Packing density
84 LEDs/m
Beam angle
120°
Width
12mm
Height
2.5 mm
Division
71.5 mm
In our shop you will find a large selection of matching 24V power supplies
Flexible 24V Dual White LED Stripe | 120 LEDs/m
€70.10*
Flexible 24V LED Stripes Dual White 120 LEDs/m for Indoor Applications
These powerful 24V LED Stripes in dual white version are suitable for indoor applications and are ideal for effect and general lighting. With our flexible dual-white 24V LED Stripes shelves, showcases or individual pieces of furniture can be brought to bear through targeted installation. They are ideal if you want to set a specific color temperature, as each LED has a cool white and a warm white chip. This technique not only allows predefined color temperatures, but also intermediate values.
In this version, the LED strip can be combined with all of our ALU profiles, which are also used for cooling.
For a sustainable operation, please note the information on the cooling of the LED strips in the data sheet.
The most important features
The supply voltage of 24V allows a large selection of LED transformers
The beam angle of 120 ° ensures large-area illumination
The assembly density of 120 LEDs / m ensures good light distribution
With a pitch of 50mm, you can shorten the LED bar as needed
Thanks to the dual white technology, the color temperatures can be freely adjusted
Application examples:
Effect lighting of cabinets, showcases and shelves
Highlighting individual pieces of furniture through targeted lighting
Lighting of railings
Increase accessibility by illuminating stairs and other tripping hazards
Atmospheric lighting in party cellars
Indirect lighting of suspended ceilings
Many other indoor applications possible
Technical data
Version
Indoor, Flexibel, dual white
Power supply
24V DC
Luminous flux
1760 lm/m total
890 lm/m coldwhite
870 lm/m warmwhite
Colortemperature
6800K - coldwhite
2900K - warmwhite
Power
17 W/m
Packing density
120 LEDs/m
Beam angle
120°
Width
10 mm
Height
2 mm
Division
50 mm
For further technical information, please refer to the data sheet.
In our shop you will find a large selection of matching 24V LED Transformers
Filigree 8mm Slim RGB 24Vdc 15W / m Stripe with 120LEDs per meter
€41.57*
Filigree 8mm Slim RGB 24Vdc 15W / m Stripe with 120LEDs per meter.
Easy to install thanks to double-sided, thermally conductive adhesive tape. The narrow design of only 8mm and the high population of 120 highly selected RGB LEDs allow new areas of application.
With the narrow, new PUR-LED Stripe, you will also find enough space for lighting in niches.
The LED bar can be separated every 5 cm and offers soldering points on both sides. This means that the bar can be cut to individual lengths.
Technical data
Electrical data
nominal voltage
24 Vdc
nominal current
0.63 A / m
nominal power
15 W / m
Efficiency
48 lm / W
Lighting data
luminous flux
720 lm / m
light color
RGB
color temperature
-
Color rendering index RA
-
beam angle
120 °
dimmable
yes, via PWM (see data sheet)
Lifespan & amp; & nbsp; Timing
nominal service life
30,000 h
ignition time
< 0.5 s
start-up time
immediately
Temperatures
Operating temperature
55 ° C measured at the TC point
Storage temperature
- 15 to +40 ° C
Dimensions
length
5,000 mm
width
8 mm
height
2 mm
division
50 mm
LED distance
approx. 8.3 mm
LED space
approx. 5 mm
Take further data from our download tab
sw_related
LED cooling profile 1m edge-line
€32.69*
LED cooling profile 100cm for up to 30W/m (aluminum)
This LED cooling profile in elegant edge-design offers a wide range of covers and at the same time ensures cooling for LED strips up to 30W/m. The cooling profile is made of anodized aluminum and klippsen the cover of your choice. Simply insert it into it.With this profile, our LED strips can be mounted directly on the intended object to save space. The additional cooling fins allow the cooling profile to optimally cool powerful LED strips.This LED aluminum profile in edge-design can be combined with LED strips we offer too.
Do you want an individual cut? Please contact us, so we can make you a perfect offer for your needs!
Selectable covers
Opal white (strong light scattering, so the light is glare-free)
Transparent (provides the highest light transmission, available with lens optics from 45° to 90°)
Diffuse linear lens (beam angle from 30° to 90° along the longitudinal axis)
Diffuse covers are ideal for RGB strips, as they mix the base colors perfectly and produce fewer individual color errors.By using a 30 ° lens, a far-reaching light image is generated, which is suitable for wallwashers, workplace lighting or ceiling lights.
Application examples:
Use in showcases for optimal lighting
For wooden furniture for visual enhancement or lighting
Workplace lighting
Wallwasher
Ceiling lights
Technical data for this LED profile
Version
Cooling profile 1m
Dimension (LxWxH) in mm
1000 x 18x 16
Internal dimension in mm
13 (For up to 12mm wide LED strips)
Width downside in mm
17.8
Material
Anodized aluminum nature
Suitable for LED bars up to
30 W/m
Technical data of the cover
Dimension (LxWxH) in mm
1000 x 20 x 10
Material
PMMA
Package contents
LED aluminum cooling profile (100cm)
The chosen cover
Without LED strips or other bulbs This profile is also available in 2m version hereIn our shop you will find a large selection of matching LED stripes such as this 24V LED stripe white with 72 LEDs/m
LED cooling profile 2m edge-line
€77.74*
LED cooling profile 200cm (aluminum) for up to 30W/m
This LED cooling profile in elegant edge-design offers a wide range of covers and at the same time ensures cooling for LED strips up to 30W/m. The cooling profile is made of anodized aluminum and let you clip it in the cover of your choice.With this profile, our LED strips can be mounted directly on the intended object to save space. The additional cooling fins allow the cooling profile to optimally cool powerful LED strips.This LED aluminum profile in edge-design can be combined with LED strips we offer too.
Do you want an individual cut? Please contact us, so we can make you a perfect offer for your needs!
Selectable covers
Opal white (strong light scattering, so the light is glare-free)
Transparent (provides the highest light transmission, available with lens optics from 45° to 90°)
Diffuse linear lens (beam angle from 30° to 90° along the longitudinal axis)
Diffuse covers are ideal for RGB strips, as they mix the base colors perfectly and produce fewer individual color errors.By using a 30 ° lens, a far-reaching light image is generated, which is suitable for wallwashers, workplace lighting or ceiling lights.
Application examples:
Use in showcases for optimal lighting
For wooden furniture for visual enhancement or lighting
Workplace lighting
Wallwasher
Ceiling lights
Technical data for this LED profile
Version
Cooling profile 2m
Dimension (LxWxH) in mm
2000 x 18x 16
Internal dimension in mm
13 (For up to 12mm wide LED strips)
Width downside in mm
17.8
Material
Anodized aluminum nature
Suitable for LED bars up to
30 W/m
Technical data of the cover
Dimension (LxBxH) in mm
2000 x 20 x 10
Material
PMMA
Package contents
LED aluminum cooling profile (200cm)
The chosen cover
Without LED strips or other bulbs This profile is also available in 1m version here In our shop you will find a large selection of matching LED stripes such as this 24V LED stripe white with 72 LEDs/m
Content: 2 Meter (€38.87* / 1 Meter)
Variants from €54.92*
CASAMBI LED dimmer 4 Channels 10-24V
€158.10*
CASAMBI LED dimmer - 4 Channels, Advanced Adaptive Dimming
This compact, high-efficiency LED dimmer has a CASAMBI control function and allows convenient operation with a tablet or smartphone. Light bulps, dimmable LED lamps and control gear for LEDs and halogen lamps can be put into operation with this CASAMBI module. However, it is not suitable for magnetic transformers.
Further features:
You can setup a gateway, but it is not necessary
Integrated antenna
Installation in flush-mounted box
Advanced Adaptive Dimming
Push button input for controlling
Ideal for LED strips with high performance
Adjustable profiles, operating modes for 808948:
4 independent channels each up to 4.4A
RGB+W operating with up to 4.4A each
Tuneable WHite (TW) with 2x 8.8A
2 independent channels each up to 8.8A
Interconnection to single-channel operation for up to 17.6A
Setup and operating instructions:
It is recommended to install the free app from CASAMBI. It is available both in the "App Store" and in the "Play Store". This offers you the following options:
Lighting control (colour/dim level)
Configuration of luminaires and luminaires networks
Creation of scenes and animations (colour gradient)
Automatic detection of new device
Intelligent timer and gallery function
Protection settings of your luminaires network („just me“, „with password“,...)
Technical data:
Article number
808948
Type
DE4DABT14-422
Power supply input
10..24 Vdc
Signal input
BT 4.0 (2,4 GHz) lite @ Smart device
Funksignal
2,4..2,483 GHz; 4 dBm
Alternative control
push button, DALI
Max. output power
4,4 A
PWM frequency
130,2 Hz, 488 Hz
Ambient temperature
-20..+40 °C
Rated Max. temp
85 °C
IP protection level
20
Dimensions
56,6×35,8×22,6 mm
Further information can be found in the data sheet in the Download tab.
Casambi App in Appstore
Casambi App for Android
%
Zigbee DALI TW Converter with Power Supply
€109.35*
€148.75*
(26.49% saved)
DALI TW Converter with power supply
DALI control device for integration of luminaires with DALI interface into a Zigbee 3.0 system. It supports setting the colour temperature for luminaires with DALI device type 8 and type 6 acc. to IEC 62386-209. The device provides one input for connecting a push-button. The installation takes place inside of the DALI luminaire or suspended ceiling. Switch-on and minimum brightness and colour temperature limits can be saved permanently. Configuration and immediate function test via the Prog. button.
Product features
Zigbee Actuator to integrate with existing DALI luminaires in a Zigbee 3.0 system
Switch and brightness settings for luminaires with a DALI interface in broadcast mode without addressing
Colour temperature settings for luminaires with DALI Device Type 8 or Device Type 6 according to IEC 62386-209
Parameterisation via NEXENTRO Confi g App
Updateable via NEXENTRO Config App
Installation in luminaires or suspended ceilings
Input for connecting a push-button
Button and LED for commissioning and functionality Tests
Technical Data DALI TW Converter with power supply
Mains voltage
AC 230 / 240 V ~
Mains frequency
50 / 60 Hz
Power consumption
max. 2,2 W
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Nominal voltage DALI
typ. 16 V
Output current
DT8: 50 mA; DT6: 4 mA
Short-circuit current
DT8: 60 mA; DT6: 5,3 mA
Degree of protection
IP20
Dimensions (LxWxH)
ca. 175 x 43 x 18 mm
Cable length E1
max. 3 m
Number of DALI devices
DT8: max. 25; DT6: max. 2 per output
Zigbee
Communication protocol
Zigbee 3.0 (Router)
Radio frequency
2,400 ... 2,483 GHz
Transmission capacity
1 mW
Bluetooth
Radio frequency
2,400 ... 2,480 GHz
Transmission capacity
max. 2 mW, Class 2
Transmitting range
typ. 10 m
Nexentro Apps: