LED driver Maxi Jolly HC/2 (BI) DALI

TCI Maxi Jolly Midnight LED driver; dimmable TCI 122416 50 watt, with a dusk sensor programmable brightness levels can be switched. The manufacturer TCI brings with the Maxi Jolly Midnight an "intelligent" LED converter on the market. This recognizes by itself when the night setback is required. The duration of night setback is programmable. Max. Power out 50W. Constant voltage, constant current are adjustable via dip-switch. Flicker ( Output Ripple ) <= 3% Conformal Coating Multicurrent-multivoltage converter- universally applicable. External temperature sensor optional. The Maxi Jolly Midnight is also available on request in the standard version 122416 and in the version 122408CC. Contactform Dip-SW Power out Voltage out Current out # LED Position 1 25 W 74 V max. 350mA const. max 20 Position 2 35 W 72 V max. 500mA const. max 20 Position 3 39 W 72 V max. 550mA const. max 20 Position 4 46 W 72 V max. 650mA const. max 20 Position 5 50 W 71 V max. 700mA const. max 18 Position 6 50 W 66 V max. 750mA const. max 17 Position 7 50 W 58 V max. 850mA const. max 16 Position 8 50 W 55 V max. 900mA const. max 16 Position 9 50 W 48 V max. 1,05 A const. max 14 Position 10 50 W 48V constant voltage Efficiency depending of the power: 20W - 50W : 84%  - 91% All TCI Jolly converter can be connected to each other via sync-cable. Thus, the control over only one button is possible. Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves). Button and installation materials are not included in delivery. For detailed description please refer to the data sheet.

LED Driver DC MAXI JOLLY HV 60 - 1-10V & Push (High Voltage) The special feature of the Maxi Jolly HV (TCI 127414, 151414) is the possibility to operate up to 32 LEDs in series on one LED converter, depending on the set current. This makes it possible to economically install several recessed LED spotlights, for example. The LED emitters are simply chained in series. For reliable operation, please pay attention to the max. voltage or power per string. Features of the Maxi Jolly HV versions: LED converter with high output voltage (up to 112V at 350mA) high power of 50W or 60W. Constant current adjustable via dip switches. Master-slave operation via synchronization lines possible (PWM mode only) Ext. temperature sensor optional. dimming via 1-10V Interface provided (127414, 151414) Touch dimming prepared via key input. On/Off by pressing the button briefly, changing the brightness by pressing the button. (127414,151414) flicker (output ripple) <= 3% Also available with hybrid dimming (AM + PWM). (127414) As well as with continuous linear dimming (AM) available. (151414) The Maxi Jolly high voltage is available in the following variants: TCI 127414 is the technologically improved successor of the #122414 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used. By short-circuiting the NTC input when switching on, you can switch between "PWM-only" and hybrid operation. Confirmation by single flashing (PWM), double flashing (hybrid) TCI 151414 (up to 60W, absolutely flicker-free) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm. 100% camera-ready. Attention: No master-slave operation via sync line possible. The technical differences  in detail can be found in the data sheets. Technical Data TCI 127414, 127414BI, 151414, 151414BI Dip-SW Performance Spg. sek Current sek # LED Position 1 28 W 20...112 V 250mA const. max 32 Position 2 34 W 20...112 V. 300mA const max 32 Position 3 39 W 20...112 V. 350mA const max 32 Position 4 45 W 20...112 V 400mA const max 32 Position 5 50 W 20...112 V 450mA const max 32 Position 6 56 W 2...112 V 500mA const max 32 Position 7 60 W 2...110 V 550mA const max 31 Position 8 60 W 2...100 V 600mA const max 28 Position 9 60 W 2...92 V 650mA const max 26 Position 10 60 W 2...86 V 700mA const max 24 Efficiency as a function of power: 30W - 50W : 84%  - 91% For data on Maxi Jolly HV... please refer to the respective data sheets (see Download Tab) All TCI Jolly converters can be connected via sync cable in PWM mode. This means that control via only one push-button is possible. Up to 10 converters (slave) can be operated on one master. Button and installation material are not included. In order to avoid inductive interferences in the secondary cable if necessary, it should be kept as short as possible and the maximum distance between power cables should be kept. For a detailed description please refer to the data sheet. History of this proven LED-Driver: TCI 122414 with output voltage up to 112V can operate up to 32 LEDs in series. Dimming is done by PWM. Preferred areas of application are street lights, or also for the operation of many e.g. LED recessed ceiling spots. Via Synchronisation lines a large number of LED spots can be elegantly operated and dimmed in master-slave operation. (End of live, Successor is 127414)

TCI Maxi Jolly US LED driver - Now available as Bilevel N Version This LED driver TCI 122418N can be used in two different levels, for example at 100% power and a programmable value for night setback. The reduction level of light can be changed with a simple programming on the mains or by connecting resistor to the "LEVEL" terminal block. Bilevel N means that the LED driver is normally in reduction mode and through the control signal go to 100% of light output. Ideal for stree lighting. Multicurrent-multivoltage converter- universally applicable.Flicker ( Output Ripple ) <= 3% External temperature sensor optional.The Maxi Jolly US Bilevel is also available as a high-voltage version: Maxi Jolly HV Bilevel Dip-SW Power Voltage out Current out # LED Position 1 25 W 74 V max. 350mA const. max 20 Position 2 35 W 72 V max. 500mA const max 20 Position 3 39 W 72 V max. 550mA const max 20 Position 4 46 W 72 V max. 650mA const max 20 Position 5 50 W 71 V max. 700mA const max 18 Position 6 50 W 66 V max. 750mA const max 18 Position 7 50 W 58 V max. 850mA const max 16 Position 8 50 W 55 V max. 900mA const max 16 Position 9 50 W 48 V max. 1,05 A const max 14 Position 10 50 W 48V constant voltage Efficiency depending of the power: 20W - 50W : 84%  - 91% All tci Jolly converter can be connected to each other via sync-cable. Thus, the control over only one button is possible.Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves).Button and installation materials are not included in delivery. For detailed description please refer to the data sheet.