HVGC-65 watt LED Driver

LED Driver DC MAXI JOLLY HV 60 - 1-10V & Push (High Voltage) The special feature of the Maxi Jolly HV (TCI 127414, 151414) is the possibility to operate up to 32 LEDs in series on one LED converter, depending on the set current. This makes it possible to economically install several recessed LED spotlights, for example. The LED emitters are simply chained in series. For reliable operation, please pay attention to the max. voltage or power per string. Features of the Maxi Jolly HV versions: LED converter with high output voltage (up to 112V at 350mA) high power of 50W or 60W. Constant current adjustable via dip switches. Master-slave operation via synchronization lines possible (PWM mode only) Ext. temperature sensor optional. dimming via 1-10V Interface provided (127414, 151414) Touch dimming prepared via key input. On/Off by pressing the button briefly, changing the brightness by pressing the button. (127414,151414) flicker (output ripple) <= 3% Also available with hybrid dimming (AM + PWM). (127414) As well as with continuous linear dimming (AM) available. (151414) The Maxi Jolly high voltage is available in the following variants: TCI 127414 is the technologically improved successor of the #122414 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used. By short-circuiting the NTC input when switching on, you can switch between "PWM-only" and hybrid operation. Confirmation by single flashing (PWM), double flashing (hybrid) TCI 151414 (up to 60W, absolutely flicker-free) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm. 100% camera-ready. Attention: No master-slave operation via sync line possible. The technical differences  in detail can be found in the data sheets. Technical Data TCI 127414, 127414BI, 151414, 151414BI Dip-SW Performance Spg. sek Current sek # LED Position 1 28 W 20...112 V 250mA const. max 32 Position 2 34 W 20...112 V. 300mA const max 32 Position 3 39 W 20...112 V. 350mA const max 32 Position 4 45 W 20...112 V 400mA const max 32 Position 5 50 W 20...112 V 450mA const max 32 Position 6 56 W 2...112 V 500mA const max 32 Position 7 60 W 2...110 V 550mA const max 31 Position 8 60 W 2...100 V 600mA const max 28 Position 9 60 W 2...92 V 650mA const max 26 Position 10 60 W 2...86 V 700mA const max 24 Efficiency as a function of power: 30W - 50W : 84%  - 91% For data on Maxi Jolly HV... please refer to the respective data sheets (see Download Tab) All TCI Jolly converters can be connected via sync cable in PWM mode. This means that control via only one push-button is possible. Up to 10 converters (slave) can be operated on one master. Button and installation material are not included. In order to avoid inductive interferences in the secondary cable if necessary, it should be kept as short as possible and the maximum distance between power cables should be kept. For a detailed description please refer to the data sheet. History of this proven LED-Driver: TCI 122414 with output voltage up to 112V can operate up to 32 LEDs in series. Dimming is done by PWM. Preferred areas of application are street lights, or also for the operation of many e.g. LED recessed ceiling spots. Via Synchronisation lines a large number of LED spots can be elegantly operated and dimmed in master-slave operation. (End of live, Successor is 127414)

Meanwell HLG100H-24 The HLG100H-24 is a high performance dust - and waterproof AC-to-DC LED power supply up to 100W. The Meanwell HLG100H - the LED switching power supply is suitable in execution, for example -12A, perfect for for performance among others with 12V lamps, such as low-voltage LED spotlight MR16 / GU5.3 or MR11 and LED Stripes. The high power (up to 100W), many LED lamps can be switched to a single transformer. Saving of costs! Even in outdoor applications is the HLG100 very suitable due to high protection.  It is also possible to dim via an additional input (Typ B)   HLG100H features (depends on type): 7 Years manufacturers warranty IP65 for indoor or outdoor installations Cooling by free air convection Built-in active PFC function Protections: over -/laod, -/voltage, -/temperature IP65/IP67 for outdoor installations Three possibilities of dimming via 1-10 V, PWM or resistance OCP point adjustable through output cable or internal potentiometer Universal alternate current up to 305VAC Type H for use Class I Zone 2 (gases and vapors) Compliance to worldwide safety regulations for lighting LED lighting especially street lighting applications   Performance HLG100H Typ -24 A: IP65 design for indoor or outdoor installations IP65 rated. Output voltage and and constant current level can be adjusted through internal potential meter.    Performance HLG100H Typ -24 B: Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer IP67 protection. For indoor -and outdoor applications High performance via DALI dimming in connection with DAP-04 DALI PWM converter Technical data to Meanwell power supply HLG: Execution For LED and lighting applications Model Switching power supply, Performance H Input  90 - 305 VAC / 127 - 431 VDC 47 -63 Hz Rated Power 95,58 - 96W (voltage depending, see datasheet) Surge solidity 4 kV Output operating parameters  See data sheet Design  HLG Approbation  UL / EN Class C Dimension 220mm x 68mm x 38,8mm (H x W x D)   On request, we also offer the type D or other voltage ranges.

Meanwell ELG-100-xx"Type" The Meanwell power supply ELG-100 Series includes a constant voltage source as well as a constant current source.It has an output power of 100 watts and output voltages from 24V to 54V so that various LED applications such as road-, indoor-, and architectural- lighting can be realized.With its metal housing and IP65 / IP67 the use for indoor and outdoor applications in the temperature ranges from -40 ° C to 85 ° C is possible.Depending on the type the connected LED illumination can be dimmed via 0-10V, PWM signal, potentiometer or DALI interface. ELG100 features (depends on type): 5 Years warranty Universal input voltage from 100V up to 305V AC High efficiency up to 90% Built-in active PFC function Protections: over -/load, -/voltage, -/temperature Type "?HL?" for use in Class I, Division 2hazardous (Classified) location IP65/IP67 for indoor or outdoor installations Standby power consumption < 0.5W Compliance to worldwide safety regulations for lighting Performance ELG-100 Typ -xx"-"(Blank): Current and voltage output fixed IP67 protection. For indoor -and outdoor applications Performance ELG-100 Typ -xx"A": Output voltage and current level adjustable through built-in-potentiometer IP65 design for indoor or outdoor installations be adjusted through internal potential meter Performance ELG-100 Typ -xx"B": Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer IP67 protection. For indoor -and outdoor applications Performance ELG-100 Typ -xx"DA": Lightning control via DALI interface IP67 protection. For indoor -and outdoor applications Technical data Meanwell ELG-100 Power Supply: Input 100 - 305 VAC  / 142 - 431 VDC 47 - 63 Hz Output Depending on type, see data sheet Rated Power 70 - 96,12 W (voltage depending, see datasheet) Series ELG Typical lifetime > 50.000 h Dimensions (LxWxH) 199mm x 63mm x 35,5mm For further technical data, please refer to the data sheet (in tab "DOWNLOADS").On request, we also offer type and voltage ranges.

High-performance DC-LED-Driver incl. IP67, 3 in 1 Dimming / DALI Product Description: HVGC-1000 series is a 1000W LED AC/DC driver featuring the constant power mode with wide output voltage range. The module operates from 180VAC - 528VAC and offers models with different rated current ranging between 2800mA and 5600mA. Thanks to the high efficiency up to 96%, with the fanless design, all models are able to operate for -40°C to +90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications, such as horticulture and stadium lighting.HVGC-1000 is equipped with various function options, such as dimming methodologies in order to provide the optimal design flexibility for LED lighting system. Features of HVGC-1000 series: Wide input range 180 ~ 528VAC Constant power mode output Metal housing with Class I design Surge protection with 8KV/4KV Built-in active PFC function  IP67 design for indoor or outdoor installations Dimming options: 3 in 1 dimming (dim-to-off); Smart timer dimming and DALI 2.0 Auxiliary DC output 12v/500mA Typical lifetime>50000 hours 5 years warranty Applications: Harbor lighting LED high-bay lighting Parking lot lighting LED fishing lamp Horticulture lighting Stadium lighting Technical Data: Model HVGC-1000A-L-AB   HVGC-1000A-M-AB HVGC-1000A-H-AB  Rated current 2800 mA  4200 mA  5600 mA  Version For LED lighting applications (DIN EN61347) Nominal voltage 230 VAC Min. input voltage 180 VAC Max. input voltage 528 VAC Constant current region 150-380 VDC 95-240 VDC 70-180 VDC Rated power (output) 1003,2 W 1008,0 W 1008,0 W Frequency range 47-63 Hz  Efficiency 95,5 %  96,0 %  96,0 %  Working temperature  -40°C to +90°C  Storage temperature -40°C to +80°C  Type of construction Closed Material (housing) Primary aluminium Protection level IP67 Surge protection 8kV / 4kV Service life >50.000 h Dimensions 310*144*48,5 mm (L*W*H)The data sheet in the download tab provides further information to the HVGC-1000 series.

HVGC-100 watt LED Driver incl. 3 in 1 dimming and Timer dimming, IP65/67 Product Description: HVGC-100 series is a 100W LED AC/DC driver featuring the constant current mode and high voltage output. The module operates from 180VAC - 528VAC and offers models with different rated current, 350mA and 750mA, respectively. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40°C to +90°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-100 is equipped with various function options, such as dimming methodologies, in order to provide the optimal design flexibility for LED lighting system. Version HVGC100 Type -xx-"A": IP65 protection level Output voltage and current limiting adjustable through built-in potentiometer Smart timer dimming possible Version HVGC100 Type -xx-"B": IP67 protection level 3 in 1 dimming function (0-10 Vdc, 10V PWM signal and resistance) Smart timer dimming possible Features: Wide input range 180 ~ 528VAC Constant Current mode output Metal housing with Class I design Built-in active PFC function  IP67 / IP65 design for indoor or outdoor installations Function options: output adjustable via potentiometer;3 in 1 dimming (dim-to-off) ; Timer dimming Typical lifetime>50000 hours 5 years warranty Applications: LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp Technical Data for HVGC-100-xxx mA:  Model (Type A) -350A -700A Model (Type B) -350B -700B Rated current 350 mA  700 mA  Design For LED lighting applications (DIN EN61347) Nominal voltage 230 VAC Min. input voltage 180 VAC Max. input voltage 480 VAC Constant current region 29-285 VDC 15-142 VDC Rated power (output) 99,75 W 99,40 W Frequency range 47-63 Hz  Efficiency 91,0 %  Working temperature  -40°C to +90°C  Storage temperature -40°C to +80°C  Type of construction Closed Material (housing) Primary aluminium Protection level Type A: IP65 / Type B: IP67 Service life >50.000 h Dimensions 236*68*38,8 mm (L*W*H)The data sheet in the download tab provides further information.

Constant Current Driver HVGC-150 Watt, 3 in 1 dimming / timer dimming, IP67/65 Product Description: HVGC-150 series is a 150W LED AC/DC power supply featuring the constant current mode and high voltage output. The module operates from 180VAC - 528VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40°C to +80°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-150 is equipped with various function options, such as dimming methodologies in order to provide the optimal design flexibility for LED lighting system. Version HVGC150 Type -xx-"A": IP65 protection level Output voltage and current limiting adjustable through built-in potentiometer Smart timer dimming possible Version HVGC150 Type -xx-"B": IP67 protection level 3 in 1 dimming function (0-10 Vdc, 10V PWM signal and resistance) Smart timer dimming possible Features: Wide input range 180 ~ 528VAC Constant Current mode output Metal housing with Class I design Built-in active PFC function  IP67 / IP65 design for indoor or outdoor installations Function options: output adjustable via potentiometer;3 in 1 dimming (dim-to-off) ; Timer dimming Typical lifetime>50000 hours 5 years warranty Applications: LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp Technical Data for HVGC-150-xxx mA:  Model (Type A) -350A -500A -700A -1050A -1400A Model (Type B) -350B -500B -700B -1050B -1400B Rated current 350 mA  500 mA  700 mA  1050 mA  1400 mA  Design For LED lighting applications (DIN EN61347) Nominal voltage 230 VAC Min. input voltage 180 VAC Max. input voltage 528 VAC Constant current region 42-428 VDC 30-300 VDC 21-215 VDC 15-143 VDC 12-107 VDC Rated power (output) 149,80 W 150,00 W 150,50 W 150,15 W 149,80 W Frequency range 47-63 Hz  Efficiency 91,0 %  91,0 %  91,0 %  90,0 % 90,0 % Working temperature  -40°C to +80°C  Storage temperature -40°C to +80°C  Type of construction Closed Material (housing) Primary aluminium Protection level Type A: IP65 / Type B: IP67 Service life >50.000 h Dimensions 245*68*38,8 mm (L*W*H)The data sheet in the download tab provides further information.