0-10V to DALI converter 86468352

€63.01*

Prices incl. VAT plus shipping costs

3 Reviews

Version

with OFF-Function (1%-100%) (active/passive): 86468352-001

with OFF-Function (10%-100%) (active/passive): 86468352-010

w/o OFF-Function (1%-100%) (active/passive): 86468352-101

w/o OFF-Funktion (10%-100%) (active/passive): 86468352-110

Product number: 595-86468352-110

Product information "0-10V to DALI converter 86468352"

DALI converter for the converting of 0-10V analog signals to DALI

With the compact interface module by Lunatone, the converting of analog signals (0-10V) into digital DALI signals happens easily. Choose your preferred model of the DALI converter from the variants with resp. without OFF-function and a dimming range of either 1-100% or 10-100% now.

Overview of the specifications of the DALI converter:

The read in 0-10V voltage is issued on the DALI-subcircuit via broadcast .
A changing of the 0-10V input voltage (>1%) is used as event trigger.
A linear 100k-potentiometer can be directly connected to the 0-10V to DALI converter..
The module is supplied by a 12-24V power supply or a DALI-circuit, at any polarity.
Compact interface module for the converting of 0-10V control signals into DALI (Direct Arc Power Level).
Integrated bus supply for the DALI-subcircuit with up to 4 standard-DALI charges (10mA), expansion for up to 64 charges is possible with a DALI-expander.
The standart application for the 0- 10V to DALI converter is therefore the direct control off up to 4 DALI-EVGs with a 0-10V control unit.
A galvanic isolation between DALI-output (10mA) and 0-10V input resp. 24V-supply can be realised with a DALI-expander
Various variants for different output cable areas, as well as switch-on and switch-off conducts are available.

Technical data:

Type 0-10V / DALI converter
Function: converter
Typical electricity demand: 4,1mA + electricity demand for the DALI subcircuit
Output: DALI, I_max = 10 mA
Power supply: 12 V - 24 V at any polarity
Input: 0 - 10 V
Protection type: IP20
Wirelength to the 0 - 10 V control unit: 50 cm
Connection wire section: 0,5 - 1,5 mm²
Temperature: 0 °C - 50 °C
Dimensions (LxWxH): ca. 40x28x15 mm

These variants with the following specifications are avialable:

Active and passive input available (universal use and replace the following versions gradually):
with OFF-function (1%-100%): 86468352-001

with OFF-function (10%-100%): 86468352-010
without OFF-function (1%-100%): 86468352-101
without OFF-function (10%-100%): 86468352-110

Active input (module provides the power supply, direct connection of a (linear) 100k?-potentiometer is possible, phaseout):
with OFF-Funktion (1%-100%): 86468352-001-A

with OFF-Funktion (10%-100%): 86468352-010-A
without OFF-Funktion (1%-100%): 86468352-101-A
without OFF-Funktion (10%-100%): 86468352-110-A

Passive input (the module provides no voltage, suitable for the control of a 0-10V analog signal, phaseout):

with OFF-function (1%-100%): 86468352-001-P

with OFF-function (10%-100%): 86468352-010-P
without OFF-function (1%-100%): 86468352-101-P
without OFF-function (10%-100%): 86468352-110-P

Application/IP-Code:	IP20 - IP44 (Indoor)
Dimmable/Control:	1..10V, DALI

3 of 3 reviews

4.67 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Sort by

27 April 2020 15:00

Bestes Preis/Leistungsverhältnis

Endlich ein DALI Konverter der tut was er soll! Gerne wieder

31 May 2021 08:34

n/a

31 March 2020 12:59

Hält was es verspricht

Super schneller Versand, top Beratung und Produkt hält was es verspricht. Was will man mehr?

sw_similar

Single-channel 12-48 CV LED dimmer DALI & Switch Dim | 89453829

DALI 1 channel LED dimmer (CV) 89453829 controllable via DALI or switch dim Input voltage of 12V to 48V DC, available in different housing variations, depending on the model for connected currents up to 16A, 1 PWM output (16Bit). Output controllable via DALI or switch dim. Product specifications: 1 channel LED-dimmer with switch dim or DALI Makes the control of constant voltage-LED-modules possible Control via DALI or via conventional button (integrated switch dim - function) The output is dimmable from 1% to 100% Supply voltage 12V to 48V DC Configuration via DALI-cockpit software tool and DALI USB-interface Depending on the model connecting currents of 4A, 6A, 8A, 10A or 16A The maximum connecting current mustn't be exceeded, the best effiency is achieved at an even electricity distribution on the outputs Technical data: Type DALI 1Ch LED Dimmer CV Article number 89453826 86459556 86459572 89453829 Electrical data: Supplx voltage Vin 12V-28VDC 12VDC-48VDC Max. input current Iinmax 4A 8A 10A 16A Control input DALI SwitchDim 48V DALI SwitchDim2 (mains voltage) DALISwitchDim (mains voltage) Current consumption DALI 2mA Number DALI addresses 1 Standby power consumption (12V) 120 mW Technical data: Power on behaviour configurable via DALI: 0%-100%, last value Storing and transportation temperature -20°C … +75°C Ambient temperature -20°C … +60°C expected lifetime (at Tc<=75°C) >100000h Protection class IP20 Max. connecting wire cross section 1.5 mm2 2.5 mm2, DALI/SwitchDim: 1.5 mm2 Dimensions (LxWxH) 40x28x14 mm 59x33x15 mm 120x30x22 mm Housing/mounting Back box Remote ceiling For further information please refer to the data sheet in the Download tab.

Variants from €61.48*

€58.55*

Details

DALI Button Switch Cross incl. RX Modul - 86459541

DALI button switch cross or as WDALI-Set with ReceiverRadio control module for DALI circuits with four freely programmable buttons.The wDALI switch is a DALI control module, which is connected wireless to the DALI bus. The battery operated switch can be installed at every place without any installation effort. Destination address, switching characteristic and DALI commands can be assigned To every button of the wDALI switch. The following DALI commands are available for this purpose: dim up, dim down, off, recall min., recall max., goto scene 1-16, direct arcpower ...%, mask and predefined macros. Product specifications DALI control module with 4 buttons Possibility of sending DALI commands to single addresses (0-63), groups (0-15), and broadcasts As switching function different buttons (short/long button push), switching buttons, switches etc. can be chosen Memory function for brightness with the help of macros 2 different fabrication settings are possible The wDALI switch offers the possibility to control components of the DALI circuit, without the operating device being physically connected to the DALI circuit. The wDALI switch contains of two components, an arbitrarily placeable operating device (sender unit) and a receiving unit, which is connected to the DALI bus The receiver of the DALI switch is supplied through the DALI line, there is no additional connection needed Configurable power up function, this means automatic sending of a command after a power interruption The wDALI switch can instantly used for the control of a DALI circuit with the fabrication settings Adjustments and changing of the configuration through the DALI bus with help of the DALI cockpit software Every button can be assigned to 4 destination addresses, switching functions and DALI commands The following DALI commands are available for this purpose: up, down, off, recall min/max, goto scene 1-16, direct arcpower in % and macros DALI DT8 support for the control of colour temperature of luminaires through appropriate macros Multiple wDALI switch can be used in the same DALI circuit The operating unit of the wDALI switch is designed as wall switch and can be placed freely within the receiving range of the receiver Technical data Colour: white/black Supply: Battery resp. via DALI-Bus typ. current consumption: 2 mA Output: DALI Function: programmable Frequency band: 2,4Ghz Receiving range: up to 300 m Dimensions operating unit (W x H x D): 82x82x8,5 mm Expectable battery life of the operating unit: 6 years Dimensions Receiver (W x H x D): 35 mm x 28 mm x 15 mm Temperature: -10 °C - 50 °C Protection type: IP54 Connecting wire section: 0,5 - 1,5 mm2

Variants from €146.00*

€139.05*

Details

Interface DALI 0-10V PWM

DALI 0-10V PWM interface Interface for integrating luminaires with 0-10V control input into a DALI systemThe Interface DALI 0-10V PWM 86458508-PWM converts DALI signals into a PWM output signal and enables the integration of ECGs or LED ballasts with PWM or 0-10V input into a DALI system. The output can drive up to 1mA.You can get the following versions:Conversion of a DALI signal into a galvanically isolated PWM signal (up to 1mA output current): 86458508-PWM Interface DALI 0-10V PWMConverting a DALI signal into a galvanically isolated PWM signal (up to 100mA output current): 86458508-100 DALI PWMConverting a DALI signal into a 0-10V analog signal without galvanic isolation: 86458508-LE Schnittstelle DALI 0-10VConverting a DALI signal into a 0-10V analog signal with galvanic isolation: 86458508-AN Schnittstelle DALI 0-10V Product features Module for converting a DALI signal into a PWM output signal Suitable for controlling electronic ECGs with 0-10V control input, provided they have an appropriate input filter (e.g. from Meanwell, LG or Philips). Conversion of the DALI 8-bit ArcPower level into a corresponding PWM signal (~500Hz) of 0%-100%. Two variants of control characteristic available Two variants of control characteristic available Current at PWM output: 1mA max. (current sink) The module is supplied directly via the DALI line and does not need to be connected to the mains The interface represents a device on the bus and can be addressed accordingly Connection terminals for looping through the DALI bus Galvanic isolation between DALI and PWM output signal Technical Data Supply: from DALI bus power supply: from DALI bus type. Power consumption* DALI: 3.1 mA Inputs: DALI Output: 488Hz PWM (0-100%) /1mA current sink Dimensions (L x W x H): 42 mm x 28 mm x 14 mm Weight: ~10g Temperature: 0 °C - 45 °C Protection class: IP20 connection wires Cross section: 0.5 - 1.5 mm2 *At typ. Supply voltage (16VDC), without communication

€39.96*

DALI LED Dimmer CV (multichannel)

DALI LED dimmer with constant voltage with 2, 3 resp. 4 separately controllable channels. Every channel of the DALI LED dimmer by Lunatone has it's own DALI address and can therefore be controlled independently. Input voltage of 12 to 48 V, depending on the model for connection currents up to 16A, 2-4 PWM outputs (16Bit). Product specifications: Allows a separated control of 2, 3 resp. 4 PWM outputs via DALI Suitable for the control of constant voltage LED modules Every output is 1% - 100% dimmable Configuration via DALI cockpit softwaretool and DALI USB-interface LED-dimmer with 2, 3 resp. 4 separated channels Every channel has it's own DALI address Different housing variants depending on the type (check data sheet) Supply voltage 12V to 48V DC (depending on the type, check the data sheet) Max. connection currents of 4A, 8A, 10A or 16A depending on the type The maximum connection current can be spread on the channels arbitrarily, the sum current musn't exceed the connection current. Ströme / Kanäle 2Ch 3Ch 4Ch 4A 89453827 89453828 -- 8A 89453833 89453834 89453835 10A 86459561 86459571 86459560 16A 89453830 89453831 89453832 16A(HS) 89453830-HS 894538318945383189453831-HS 89453832-HS Technical data Supply voltage: Check the data sheet Control input: DALI Temperature: Check the data sheet Protection type: IP20 Condition after return: depends on the DALI configuration Max. wire cross-section: Check the related picture or the data sheet Dimensions (LxWxH): Check the related picture or the data sheet

Variants from €69.16*

€65.87*

Details

Interface DALI 0-10V 86458508

Integration of 0-10V devices in a DALI system with Lunatone DALI 0-10V interfaceThis interface DALI 0-10V by Lunatone, converts DALI-signals into an analog 0-10V signal. This makes the integration of LED-ballasts or electronic ballasts with 0-10V or 1-10V control input into a DALI-system possible.By choosing a linear or logarithmic dimming curve and either from 0-10V or 1-10V output voltage range, the interface becomes DALI 0-10V IEC62386-206 compliant (DALI Device Type 5).The following models are available here:Converting a DALI signal into a galvanic isolated PWM signal (up to 1mA output current): 86458508-PWMConverting a DALI signal into a galvanic isolated PWM signal (up to 100mA output current): 86458508-100Converting a DALI signal into an 0-10V analog signal without galvanic isolation: 86458508-LEConverting a DALI signal into an 0-10V analog signal with galvanic isolation: 86458508-AN Product specifications: Converting of the DALI 8-Bit Arc-Power-Level in an analog output voltage from 0V to 10V Manufacturer-specific mode for the adjustment of the output voltage range (from Firmware 2.0) Particular for devices with 0-10V control input Output voltage range switchable between 0-10V and 1-10V Choosing of linear or logarithmic dimming curve (DT5) The DALI 0-10V has a DALI-adress and can be assigned to groups and scenes Multiport for DALI Max. current on the output: 1mA Module for the converting of DALI signals into an 0-10V analog signal (DALI DT5) The supply of the module happens directly via DALI-line, there is no additional supply needed. Technical data Inputs: DALI Supply: via DALI Typical current consumption DALI: <3 mA Output: 0-10V (0%-100%) analog voltage 1mA max. (current sink) Dimensions (L x W x H): 39,7 mm x 28,0 mm x 14,2 mm Weight: ca. 10g Temperature: 0 °C - 45 °C Protection type: IP20 Cross-section of the connection wires: 0.5-1.5 mm2

Variants from €36.89*

€35.13*

Details