Interface DALI 0-10V 86458508

DALI PWM interface from LunatoneThe DALI PWM interface 86458508-100 converts DALI signals into a galvanically isolated PWM signal and enables the integration of ECGs or LED ballasts with PWM control input into a DALI system (e.g. for Meanwell HLG, HLN, NPF or LPF series). Suitable for controlling many control units, as an output current of up to 100mA can be driven.DALI Device Type 5 (IEC62386-206) compatible: selection of linear or logarithmic dimming curve, switchable output voltage range (0-100% PWM / 10-100% PWM).You can get the following versions:Converting a DALI signal into a galvanically isolated PWM signal (up to 1mA output current): 86458508-PWM Interface DALI 0-10V PWMConversion of a DALI signal into a galvanically isolated PWM signal (up to 100mA output current): 86458508-100 DALI PWMConverting a DALI signal into a 0-10V analog signal without galvanic isolation: 86458508-LE Interface DALI 0-10VConverting a DALI signal into a 0-10V analog signal with galvanic isolation: 86458508-AN Interface DALI 0-10V  Product characteristics Module for converting a DALI signal into a PWM output signal Suitable for controlling electronic ECGs with PWM control input (e.g.: Meanwell HLG, HLN, NPF or LPF series) Non-interference digital signal transmission compared to types with analog output voltage Conversion of the DALI 8-bit ArcPower level into a corresponding PWM signal of 0%-100%. Selection of linear or logarithmic dimming curve (DT5) Output voltage range switchable between 0-100% and 10-100% (DT5) Max. Output current 100mA (current sink, for controlling many drivers with PWM control input Maximum voltage of 60V at output PWM frequency switchable with jumper (488Hz/976Hz) The module is supplied directly via the DALI line Galvanic isolation between DALI and PWM output signal   Technical Data Supply: from DALI bus typical current consumption DALI: 3.1 mA Inputs: DALI Output: 0%-100% PWM 100mA, 60VDC max. PWM-frequency: 488Hz/976Hz 10% Dimensions (L x W x H): 39,7mm x 28,0mm x 14,2 mm Weight: ~10g Temperature: 0 °C - 45 °C Protection class: IP20 Connecting wires Cross section: 0,5-1,5 mm2

DALI 0-10V PWM interface Interface for integrating luminaires with 0-10V control input into a DALI systemThe Interface DALI 0-10V PWM 86458508-PWM converts DALI signals into a PWM output signal and enables the integration of ECGs or LED ballasts with PWM or 0-10V input into a DALI system. The output can drive up to 1mA.You can get the following versions:Conversion of a DALI signal into a galvanically isolated PWM signal (up to 1mA output current): 86458508-PWM Interface DALI 0-10V PWMConverting a DALI signal into a galvanically isolated PWM signal (up to 100mA output current): 86458508-100 DALI PWMConverting a DALI signal into a 0-10V analog signal without galvanic isolation: 86458508-LE Schnittstelle DALI 0-10VConverting a DALI signal into a 0-10V analog signal with galvanic isolation: 86458508-AN Schnittstelle DALI 0-10V Product features Module for converting a DALI signal into a PWM output signal Suitable for controlling electronic ECGs with 0-10V control input, provided they have an appropriate input filter (e.g. from Meanwell, LG or Philips). Conversion of the DALI 8-bit ArcPower level into a corresponding PWM signal (~500Hz) of 0%-100%. Two variants of control characteristic available Two variants of control characteristic available Current at PWM output: 1mA max. (current sink) The module is supplied directly via the DALI line and does not need to be connected to the mains The interface represents a device on the bus and can be addressed accordingly Connection terminals for looping through the DALI bus Galvanic isolation between DALI and PWM output signal   Technical Data Supply: from DALI bus power supply: from DALI bus type. Power consumption* DALI: 3.1 mA Inputs: DALI Output: 488Hz PWM (0-100%) /1mA current sink Dimensions (L x W x H): 42 mm x 28 mm x 14 mm Weight: ~10g Temperature: 0 °C - 45 °C Protection class: IP20 connection wires Cross section: 0.5 - 1.5 mm2 *At typ. Supply voltage (16VDC), without communication

DALI converter 86468352 for the converting of 0-10V analog signals to DALI With the compact interface module by Lunatone, the converting of analog signals (0-10V) into digital DALI signals happens easily. Choose your preferred model of the DALI converter from the variants with resp. without OFF-function and a dimming range of either 1-100% or 10-100% now. Overview of the specifications of the DALI converter: The read in 0-10V voltage is issued on the DALI-subcircuit via broadcast . A changing of the 0-10V input voltage (>1%) is used as event trigger. A linear 100k-potentiometer can be directly connected to the 0-10V to DALI converter.. The module is supplied by a 12-24V power supply or a DALI-circuit, at any polarity. Compact interface module for the converting of 0-10V control signals into DALI (Direct Arc Power Level). Integrated bus supply for the DALI-subcircuit with up to 4 standard-DALI charges (10mA), expansion for up to 64 charges is possible with a DALI-expander. The standart application for the 0- 10V to DALI converter is therefore the direct control off up to 4 DALI-EVGs with a 0-10V control unit. A galvanic isolation between DALI-output (10mA) and 0-10V input resp. 24V-supply can be realised with a DALI-expander Various variants for different output cable areas, as well as switch-on and switch-off conducts are available.     Technical data:   Type 0-10V / DALI converter Function: converter Typical electricity demand: 4,1mA + electricity demand for the DALI subcircuit Output: DALI, Imax = 10 mA Power supply: 12 V - 24 V at any polarity Input: 0 - 10 V Protection type: IP20 Wirelength to the 0 - 10 V control unit: 50 cm Connection wire section: 0,5 - 1,5 mm2 Temperature: 0 °C - 50 °C Dimensions (LxWxH): ca. 40x28x15 mm These variants with the following specifications are avialable:   Active and passive input available (universal use and replace the following versions gradually): with OFF-function (1%-100%): 86468352-001 with OFF-function (10%-100%): 86468352-010 without OFF-function (1%-100%): 86468352-101 without OFF-function (10%-100%): 86468352-110   Active input (module provides the power supply, direct connection of a (linear) 100k?-potentiometer is possible, phaseout): with OFF-Funktion (1%-100%): 86468352-001-A with OFF-Funktion (10%-100%): 86468352-010-A without OFF-Funktion (1%-100%): 86468352-101-A without OFF-Funktion (10%-100%): 86468352-110-A Passive input (the module provides no voltage, suitable for the control of  a 0-10V analog signal, phaseout): with OFF-function (1%-100%): 86468352-001-P with OFF-function (10%-100%): 86468352-010-P without OFF-function (1%-100%): 86468352-101-P without OFF-function (10%-100%): 86468352-110-P