Accessories for DALI Track busbar system from ALS
Product information "Accessories for DALI Track busbar system from ALS"
Electrical accessories for DALI track "TRACK DALI" from ALS
For the successful use of the DALI track, other components are required in addition to the tracks themselves, depending on the requirements and specification. On our website you will find all components available via selection menus.
The overview below will help you find the right parts using the picture list.
Below the picture table you will find some application examples to help you configure your own.
For pictures and selection of electrical accessories for ALS DALI tracks, see here:
Planning example for the DALI track:
Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed
At least the following are required:
- 3 Phase construction rail 1m --> 225-102
- 3 Phase construction rail 2m --> 225-202
- Electrical straight connector --> 555212062
- End feeder with data bus --> 555212012 (depending on the orientation of the protective conductor)
- End cap for the other side --> SCH-012172
Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus
- 1x 3 Phase construction rail 1m --> 225-101N
- 1x 3 Phase construction rail 2m --> 225-201N
- 1x 3 Phase construction rail 4m --> 225-401N
- 2x Corner connector protection Inside --> 555212101N
- 1x DALI center feeder --> 555252031N
- 2x endcap --> SCH-012171N
| Dimmable/Control: | DALI |
|---|---|
| Lamp shape: | Power rail |
Login
sw_similar
%
LED Track Spotlights DALI BWS30-DA
€232.73*
€236.81*
(1.72% saved)
LED track spotlights with DALI
This version of the BWS30 LED track spotlight features a DALI dimming function. It can be purchased in CoB LED module with 4 different beam angles (15°, 24°, 40° and 60°). The BWS30 has a housing made of painted die-cast aluminum and a clear protective glass. This LED track spotlight is available in 4 housing colors.
Data for the BWS30 DALI track spotlight:
Protection class I
Supply voltage: 220-240V
Integrated electronic power supply
LED operating current: 700mA
Eutrac®-3-phase electronic adapter
CRI > 90
Energy efficiency: A++ -A
Attention: Is available in CRI97 on demand
Ideal for lighting food (vegetables, meat and bakery products) and is also used in shops for object lighting. In particular, due to the very good color rendering index, it is ideal for eg. clothing stores.
Variation-specific data of the LED track spotlight BWS30 with DALI dimming:
Colour temperature
2700K
3000K
3500K
4000K
Beam angle
15°
24°
40°
60°
15°
24°
40°
60°
15°
24°
40°
60°
15°
24°
40°
60°
System power
26W
26W
26W
26W
Luminous flux (lm)
2290
2276
2342
2315
2382
2367
2436
2408
2417
2401
2473
2443
2418
2403
3135
2445
pivotable
130°
130°
130°
130°
System efficacy (lm/W)
89
88
91
90
92
92
95
93
94
93
96
95
94
93
96
95
UGR
19,35
18,45
18,80
*
19,55
18,60
18,95
*
*
*
*
*
19,65
18,70
19,05
*
Dimensions (H x B)
176mm x 126mm
176mm x 126mm
176mm x 126mm
176mm x 126mm
Outside diameter
79mm
79mm
79mm
79mm
* Data not available yet
For further information please refer to the data sheet in the Download-Tab.
TRACK DALI conductor railsystem with data-bus
€57.76*
Conductor railsystem for all ALS DALI track lights, with data bus
Attention: Please note the compatibility of DALI spotlights with the respective track systems, as EUTRAC has changed its DALI track system (ONETRACK new, TRACK previously).
Conductor rail systems are ideal for the individual lighting of your premises for gastronomy, shops, exhibitions and much more.
Thanks to the integrated DALI data bus, all dimming and scene options or grouping of the track spotlights used are available.
Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided.
You can access all of the options offered directly via the links below and via the Recommendation tab.
To simplify matters, we have created practical examples below to help you with configuration.
Technical features of the track system:
Extruded aluminium profile
Lengths from 1m to 4m selectable
Ceiling mounted or pendant installation
Traffic white RAL9016 or painted coated, or silver anodized
4 copper conductors (2,5 mm²) embedded in plastics + two data conductors (DALI, DMX, 0-10 V, KNX)
Pre-punched slotted holes for installation
Adaption of length by sawing
220-240 V max. 3 x 16 A
Protection class: 1
Test certificate: CE
Weight: 1 KG/Meter
Surface: Die-cast aluminum
Dimensions: L=1000/2000/3000/4000mm / W=36mm / H=32 mm
Large selection of connectors, feeders and mounting accessories
Planning example for the DALI track:
Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed
At least the following are required:
1x 3 phase rail 1m --> 225-102
1x 3 phase rail 2m --> 225-202
1x Longitudinal electrical connector --> 555212062
1x End feeder with data bus --> 555212012 (depending on the orientation of the protective conductor)
1x End cap for the other side --> SCH-012172
Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus
1x 3 phase rail 1m --> 225-101N
1x 3 phase rail 2m --> 225-201N
1x 3 phase rail 4m --> 225-401N
2x Corner connector protection. inside --> 555212101N
1x DALI Central feeder --> 555252031N
2x End cap --> SCH-012171N
Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)
Variants from €93.12*
LED Rail spotlight 30W MIO
€94.66*
LED Rail spotlight 30W MIO with COB technology
MIO Rail spotlight - innovative design with integrated 3-phase electronic adapter.
Used primarily for accent lighting, whereby various types of objects are to be staged at specific points.
These COB-LED modules are equipped with the latest LED generation.
The excellent CRI> 90 makes this Eutrac spot perfect for exhibitions, museums, shops, galleries and more.
Technical features:
Housing is made of die-cast aluminium (black/white)
Can be rotated through 330° and pivoted through 130°
COB module is available in 3 beam angles 15°/36°/60
With 3-phase electronic adapter
Protection: IP20
Protection class: II
Integrated electronic power supply
Energy efficiency: A++ - A
On request
With DALI adapter (pending)
Light up with
COB-LED*
COB-LED*
COB-LED*
COB-LED*
Colour temperature
2700K
3000K
3500K
4000K
Beam angle
15°
36°
60°
15°
36°
60°
15°
36°
60°
15°
36°
60°
Colour rendering index
CRI >90
pivotable
130°
130°
130°
130°
Luminous flux (lm)
2789
2943
2903
2900
3060
3019
2943
3105
3063
2944
3107
3065
System efficiency (lm/W)
81
86
85
85
89
88
86
91
81
86
91
89
System power
34W
Connected load
30W
Rail system
EUTRAC
Outside diameter
H=129mm
Dimension
91 mm
*COB - LED stands for Chip-On-Board-LED. Many LED chips together create a LED area.
Further information can be found in the datasheet for the 30Watt Series MIO rail spotlight in the Download tab.
Variants from €153.81*
%
LED Track spotlight DALI BWS40-DA
€242.58*
€255.85*
(5.19% saved)
LED track spotlights with DALI
This version of the BWS40 LED track spotlight features a DALI dimming function. It can be purchased in CoB LED module with 4 different beam angles (15°, 24°, 40° and 60°). The BWS40 has a housing made of painted die-cast aluminum and a clear protective glass. This LED track spotlight is available in 4 housing colors.
Data for the BWS40 DALI track spotlight:
Protection class I
Supply voltage: 220-240V
Integrated electronic power supply
LED operating current: 700mA
Eutrac®-3-phase electronic adapter
CRI > 90
Energy efficiency: A++ -A
Ideal for lighting food (vegetables, meat and bakery products) and is also used in shops for object lighting. In particular, due to the very good color rendering index, it is ideal for eg clothing stores.
Variation-specific data of the LED track spotlight BWS40 with DALI dimming:
Color temperature
2700K
3000K
3500K
4000K
Beam angle
15°
24°
40°
60°
15°
24°
40°
60°
15°
24°
40°
60°
15°
24°
40°
60°
Power
40W
40W
40W
40W
Luminous flux (lm)
3330
3309
3469
3355
3463
3442
3608
3490
3491
3491
3660
3540
3516
3494
3663
3493
Traversable angle
130°
130°
130°
130°
System efficiency (lm/W)
83
82
86
84
86
86
90
87
87
87
91
88
87
87
91
87
UGR
18
18
18,55
18
*
*
*
*
*
*
*
*
18,30
18,25
18,85
18,8
Dimension (H x W)
176mm x 144mm
176mm x 144mm
176mm x 144mm
176mm x 144mm
Outer diameter
99mm
99mm
99mm
99mm
* Data not available yet.
For more information please refer to the data sheet in the Download-Tab.
Mounting accessories for busbar system Track (DALI/ON/IN) by ALS
€1.62*
Mounting accessories for ALS track system TRACK (DALI / ON / IN)
In addition to the electrical connectors and feeders for the ALS track system TRACK DALI, TRACK ON and TRACK IN, different fastening elements are required depending on the location. On this page you will find a comprehensive overview of accessories for pendulum mounting (rope suspension, pipe pendulum suspension, etc. ). as well as Gripper with conductor rail clip, or ceiling clips, butt connectors, universal hooks, socket adapters and much more.A detailed overview can be found on the catalog page as a PDF file in the download segment.Via our selection menu, the respective selection depending on the colours is possible.
Variants from €2.08*
conductor railsystem with data-bus ONETRACK DALI
€56.53*
ONETRACK track system for all ALS DALI track lights, with data bus
NEW: Eutrac changes its DALI rail system - ONETRACK by EUTRAC REPLACES EUTRAC 3 WITH DATA BUS
The shape of the new ONETRACK power rails is based on the proven EUTRAC design and enables the use of the previous EUTRAC adapter. The ONETRACK DALI busbar system is ideal for the individual illumination of your premises for restaurants, shops, exhibitions and much more.
Attention: Please note the compatibility of DALI spotlights with the respective track systems (ONETRACK new, TRACK previously).
Thanks to the integrated DALI data bus, all dimming and scene options or grouping of the track spotlights used are available.
Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided.
You can access all of the options offered directly via the links below and via the Recommendation tab.
To simplify matters, we have created practical examples below to help you with configuration.
Technical features of the track system:
Extruded aluminium profile
Lengths from 1m to 4m selectable
flush adapter available with and without ballast
Ceiling mounted or pendant installation
Traffic white RAL9016 or painted coated, or silver anodized
Forward-looking 3-phase power rail with internal data bus ((DALI, DMX, others)
Pre-punched slotted holes for installation
Adaption of length by sawing
220-240 V
Protection class: 1
Test certificate: CE
Weight: 1 KG/Meter
Surface: Die-cast aluminum
Dimensions: L=1000/2000/3000/4000mm / W=31,4mm / H=37,35 mm
Large selection of connectors, feeders and mounting accessories
Planning example for the DALI track:
Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed
At least the following are required:
1x 3 phase rail 1m --> 575 2 1101 2
1x 3 phase rail 2m --> 575 2 1102 2
1x Longitudinal electrical connector --> 575 2 12062
1x End feeder with data bus --> 575 2 1201 2 (depending on the orientation of the protective conductor)
1x End cap for the other side --> 575 0 3217 2
Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus
1x 3 phase rail 1m --> 575 2 1101 6
1x 3 phase rail 2m --> 575 2 1102 6
1x 3 phase rail 4m --> 575 2 1142 6
2x Corner connector protection. inside --> 575 2 32106
1x DALI Central feeder --> 575 2 52036
2x End cap --> 575 0 3217 6
Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)
System components as accessories for the DALI ONETRACK track system Eutrac
€20.83*
System components as accessories for DALI track "ONETRACK DALI" from ALS
NEW: Eutrac changes its DALI rail system - ONETRACK by EUTRAC REPLACES EUTRAC 3 WITH DATA BU
Attention: Please note the compatibility of DALI spotlights with the respective track systems (ONETRACK new, TRACK previously).
For the successful use of the ONETRACK DALI power rail, other components are necessary in addition to the rails themselves, depending on the requirements and specifications. On our website you will find all available system components via the selection menus, you will find an overview in the download (data sheet for the various ONETRACK system components).
The system components include the respective feeders (protective conductor on the right or left) as well as various connectors, each with a feed option. The following variants are available in white, grey, black:
Straight connector, in all three colors
I-connector, in all three colors
I-connector with protective conductor on the outside, in all three colors
L-connector with protective conductor inside, in all three colors
FLEX connector, in all three colors
T-connector with protective conductor inside right, in all three colors
T-connector with protective conductor inside left, in all three colors
T-connector with protective conductor outside right, in all three colors
T-connector with protective conductor outside left, in all three colors
X-Connect,r in all three colors
Central feeder, in white and black
Below the picture table you will find some application examples to help you with your own configuration. You can download the detailed instructions in the download area as a PDF file.
Planning example for the DALI track:
Example 1: Requirement: 3m black track, surface mounting with DALI data bus, end feed
At least you need:
1x 3-phase mounting rail 1m --> 575 2 1101 2
1x 3-phase mounting rail 2m --> 575 2 1102 2
1x electrical longitudinal connector --> 575 2 12062
1x end feeder with data bus --> 575 2 1201 2(depending on the orientation of the protective conductor)
1x end cap for the other side --> 575 0 3217 2
Example 2: Requirement: 2 x 90° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, structure with DALI bus
1x 3-phase mounting rail 1m --> 575 2 1101 6
1x 3-phase mounting rail 2m --> 575 2 1102 6
1x 3-phase mounting rail 4m --> 575 2 1142 6
2x corner connector protection. inside --> 575 2 32106
1x DALI center feeder --> 575 2 52036
2x end cap --> 575 0 3217 6
Variants from €2.38*