System components as accessories for the DALI ONETRACK track system Eutrac

Product information "System components as accessories for the DALI ONETRACK track system Eutrac"

System components as accessories for DALI track "ONETRACK DALI" from ALS

NEW: Eutrac changes its DALI rail system - ONETRACK by EUTRAC REPLACES EUTRAC 3 WITH DATA BU
Attention: Please note the compatibility of DALI spotlights with the respective track systems (ONETRACK new, TRACK previously).

For the successful use of the ONETRACK DALI power rail, other components are necessary in addition to the rails themselves, depending on the requirements and specifications. On our website you will find all available system components via the selection menus, you will find an overview in the download (data sheet for the various ONETRACK system components).

The system components include the respective feeders (protective conductor on the right or left) as well as various connectors, each with a feed option. The following variants are available in white, grey, black:

Straight connector, in all three colors
I-connector, in all three colors
I-connector with protective conductor on the outside, in all three colors
L-connector with protective conductor inside, in all three colors
FLEX connector, in all three colors
T-connector with protective conductor inside right, in all three colors
T-connector with protective conductor inside left, in all three colors
T-connector with protective conductor outside right, in all three colors
T-connector with protective conductor outside left, in all three colors
X-Connect,r in all three colors
Central feeder, in white and black

Below the picture table you will find some application examples to help you with your own configuration. You can download the detailed instructions in the download area as a PDF file.

Planning example for the DALI track:

Example 1: Requirement: 3m black track, surface mounting with DALI data bus, end feed
At least you need:

1x 3-phase mounting rail 1m --> 575 2 1101 2
1x 3-phase mounting rail 2m --> 575 2 1102 2
1x electrical longitudinal connector --> 575 2 12062
1x end feeder with data bus --> 575 2 1201 2(depending on the orientation of the protective conductor)
1x end cap for the other side --> 575 0 3217 2

Example 2: Requirement: 2 x 90° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, structure with DALI bus

1x 3-phase mounting rail 1m --> 575 2 1101 6
1x 3-phase mounting rail 2m --> 575 2 1102 6
1x 3-phase mounting rail 4m --> 575 2 1142 6
2x corner connector protection. inside --> 575 2 32106
1x DALI center feeder --> 575 2 52036
2x end cap --> 575 0 3217 6

Dimmable/Control:	DALI
Lamp shape:	Power rail

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

sw_related

conductor railsystem with data-bus ONETRACK DALI

ONETRACK track system for all ALS DALI track lights, with data bus NEW: Eutrac changes its DALI rail system - ONETRACK by EUTRAC REPLACES EUTRAC 3 WITH DATA BUS The shape of the new ONETRACK power rails is based on the proven EUTRAC design and enables the use of the previous EUTRAC adapter. The ONETRACK DALI busbar system is ideal for the individual illumination of your premises for restaurants, shops, exhibitions and much more. Attention: Please note the compatibility of DALI spotlights with the respective track systems (ONETRACK new, TRACK previously). Thanks to the integrated DALI data bus, all dimming and scene options or grouping of the track spotlights used are available. Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided. You can access all of the options offered directly via the links below and via the Recommendation tab. To simplify matters, we have created practical examples below to help you with configuration. Technical features of the track system: Extruded aluminium profile Lengths from 1m to 4m selectable flush adapter available with and without ballast Ceiling mounted or pendant installation Traffic white RAL9016 or painted coated, or silver anodized Forward-looking 3-phase power rail with internal data bus ((DALI, DMX, others) Pre-punched slotted holes for installation Adaption of length by sawing 220-240 V Protection class: 1 Test certificate: CE Weight: 1 KG/Meter Surface: Die-cast aluminum Dimensions: L=1000/2000/3000/4000mm / W=31,4mm / H=37,35 mm Large selection of connectors, feeders and mounting accessories Planning example for the DALI track: Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed At least the following are required: 1x 3 phase rail 1m --> 575 2 1101 2 1x 3 phase rail 2m --> 575 2 1102 2 1x Longitudinal electrical connector --> 575 2 12062 1x End feeder with data bus --> 575 2 1201 2 (depending on the orientation of the protective conductor) 1x End cap for the other side --> 575 0 3217 2 Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus 1x 3 phase rail 1m --> 575 2 1101 6 1x 3 phase rail 2m --> 575 2 1102 6 1x 3 phase rail 4m --> 575 2 1142 6 2x Corner connector protection. inside --> 575 2 32106 1x DALI Central feeder --> 575 2 52036 2x End cap --> 575 0 3217 6 Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)

€56.53*

Details

sw_similar

TRACK DALI conductor railsystem with data-bus

Conductor railsystem for all ALS DALI track lights, with data bus Attention: Please note the compatibility of DALI spotlights with the respective track systems, as EUTRAC has changed its DALI track system (ONETRACK new, TRACK previously). Conductor rail systems are ideal for the individual lighting of your premises for gastronomy, shops, exhibitions and much more. Thanks to the integrated DALI data bus, all dimming and scene options or grouping of the track spotlights used are available. Depending on the design of the busbar architecture, various electrical connectors for the function and various mounting accessories are provided. You can access all of the options offered directly via the links below and via the Recommendation tab. To simplify matters, we have created practical examples below to help you with configuration. Technical features of the track system: Extruded aluminium profile Lengths from 1m to 4m selectable Ceiling mounted or pendant installation Traffic white RAL9016 or painted coated, or silver anodized 4 copper conductors (2,5 mm²) embedded in plastics + two data conductors (DALI, DMX, 0-10 V, KNX) Pre-punched slotted holes for installation Adaption of length by sawing 220-240 V max. 3 x 16 A Protection class: 1 Test certificate: CE Weight: 1 KG/Meter Surface: Die-cast aluminum Dimensions: L=1000/2000/3000/4000mm / W=36mm / H=32 mm Large selection of connectors, feeders and mounting accessories Planning example for the DALI track: Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feed At least the following are required: 1x 3 phase rail 1m --> 225-102 1x 3 phase rail 2m --> 225-202 1x Longitudinal electrical connector --> 555212062 1x End feeder with data bus --> 555212012 (depending on the orientation of the protective conductor) 1x End cap for the other side --> SCH-012172 Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus 1x 3 phase rail 1m --> 225-101N 1x 3 phase rail 2m --> 225-201N 1x 3 phase rail 4m --> 225-401N 2x Corner connector protection. inside --> 555212101N 1x DALI Central feeder --> 555252031N 2x End cap --> SCH-012171N Note: The power rail with length of 4,0m is also available on request. (Use "Question to product?"-Button)

Variants from €93.12*

€57.76*

Details

Accessories for DALI Track busbar system from ALS

Electrical accessories for DALI track "TRACK DALI" from ALS For the successful use of the DALI track, other components are required in addition to the tracks themselves, depending on the requirements and specification. On our website you will find all components available via selection menus.The overview below will help you find the right parts using the picture list. Below the picture table you will find some application examples to help you configure your own.For pictures and selection of electrical accessories for ALS DALI tracks, see here: Planning example for the DALI track: Example 1: Requirement: 3m power track black, surface mounting with DALI data bus, end feedAt least the following are required: 3 Phase construction rail 1m --> 225-102 3 Phase construction rail 2m --> 225-202 Electrical straight connector --> 555212062 End feeder with data bus --> 555212012 (depending on the orientation of the protective conductor) End cap for the other side --> SCH-012172 Example 2: Requirement: 2 x 90 ° arrangement of U-shaped busbar with partial lengths of 2m - 4m - 1m, white, feed in the middle of the 4m section, installation with DALI bus 1x 3 Phase construction rail 1m --> 225-101N 1x 3 Phase construction rail 2m --> 225-201N 1x 3 Phase construction rail 4m --> 225-401N 2x Corner connector protection Inside --> 555212101N 1x DALI center feeder --> 555252031N 2x endcap --> SCH-012171N

Variants from €3.27*

€3.10*

Details