TCI MAXI JOLLY HV DALI 60 | 127409 |151409

TCI Maxi Jolly Midnight LED driver; dimmable TCI 122416 50 watt, with a dusk sensor programmable brightness levels can be switched. The manufacturer TCI brings with the Maxi Jolly Midnight an "intelligent" LED converter on the market. This recognizes by itself when the night setback is required. The duration of night setback is programmable. Max. Power out 50W. Constant voltage, constant current are adjustable via dip-switch. Flicker ( Output Ripple ) <= 3% Conformal Coating Multicurrent-multivoltage converter- universally applicable. External temperature sensor optional. The Maxi Jolly Midnight is also available on request in the standard version 122416 and in the version 122408CC. Contactform Dip-SW Power out Voltage out Current out # LED Position 1 25 W 74 V max. 350mA const. max 20 Position 2 35 W 72 V max. 500mA const. max 20 Position 3 39 W 72 V max. 550mA const. max 20 Position 4 46 W 72 V max. 650mA const. max 20 Position 5 50 W 71 V max. 700mA const. max 18 Position 6 50 W 66 V max. 750mA const. max 17 Position 7 50 W 58 V max. 850mA const. max 16 Position 8 50 W 55 V max. 900mA const. max 16 Position 9 50 W 48 V max. 1,05 A const. max 14 Position 10 50 W 48V constant voltage Efficiency depending of the power: 20W - 50W : 84%  - 91% All TCI Jolly converter can be connected to each other via sync-cable. Thus, the control over only one button is possible. Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves). Button and installation materials are not included in delivery. For detailed description please refer to the data sheet.

TCI DC Jolly MD; universal dimmable LED converter TCI 122260 32 watt selectable constant current, constant voltage via dip-switch Multi current-multi voltage converter- universally applicable.The dimmable LED Converter is Controllable via conventional dimmer (Phase-fired controller) or button (Push-Button). On/off by a short push. Brightness can be changed by a longer push.Flicker ( Output Ripple ) <= 3% Dip-SW Power out Voltage out Current out # LED Position 1 17 W 2...47 V max 350mA const. max 12 Position 2 24 W 2...47 V max 500mA const max 12 Position 3 25 W 2...47 V max 550mA const max 12 Position 4 32 W 2...46 V max 700mA const max 12 Position 5 32 W 2...43 V max. 750mA const max 11 Position 6 10 W 12 V constant 900mA max - Position 7 20 W 24 V constant 900mA max - Position 8 22 W 28 V constant 900mA max - Efficiency depending of the power: 20W - 32W : 84%  - 91% All tci Jolly converter can be connected to each other via sync-cable. Thus, the control over only one button is possible.Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves).Button and installation materials are not included in delivery. For detailed description of dimmable LED converter please refer to the data sheet.

LED Driver DC MAXI JOLLY HV 60 - 1-10V & Push (High Voltage) The special feature of the Maxi Jolly HV (TCI 127414, 151414) is the possibility to operate up to 32 LEDs in series on one LED converter, depending on the set current. This makes it possible to economically install several recessed LED spotlights, for example. The LED emitters are simply chained in series. For reliable operation, please pay attention to the max. voltage or power per string. Features of the Maxi Jolly HV versions: LED converter with high output voltage (up to 112V at 350mA) high power of 50W or 60W. Constant current adjustable via dip switches. Master-slave operation via synchronization lines possible (PWM mode only) Ext. temperature sensor optional. dimming via 1-10V Interface provided (127414, 151414) Touch dimming prepared via key input. On/Off by pressing the button briefly, changing the brightness by pressing the button. (127414,151414) flicker (output ripple) <= 3% Also available with hybrid dimming (AM + PWM). (127414) As well as with continuous linear dimming (AM) available. (151414) The Maxi Jolly high voltage is available in the following variants: TCI 127414 is the technologically improved successor of the #122414 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used. By short-circuiting the NTC input when switching on, you can switch between "PWM-only" and hybrid operation. Confirmation by single flashing (PWM), double flashing (hybrid) TCI 151414 (up to 60W, absolutely flicker-free) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm. 100% camera-ready. Attention: No master-slave operation via sync line possible. The technical differences  in detail can be found in the data sheets. Technical Data TCI 127414, 127414BI, 151414, 151414BI Dip-SW Performance Spg. sek Current sek # LED Position 1 28 W 20...112 V 250mA const. max 32 Position 2 34 W 20...112 V. 300mA const max 32 Position 3 39 W 20...112 V. 350mA const max 32 Position 4 45 W 20...112 V 400mA const max 32 Position 5 50 W 20...112 V 450mA const max 32 Position 6 56 W 2...112 V 500mA const max 32 Position 7 60 W 2...110 V 550mA const max 31 Position 8 60 W 2...100 V 600mA const max 28 Position 9 60 W 2...92 V 650mA const max 26 Position 10 60 W 2...86 V 700mA const max 24 Efficiency as a function of power: 30W - 50W : 84%  - 91% For data on Maxi Jolly HV... please refer to the respective data sheets (see Download Tab) All TCI Jolly converters can be connected via sync cable in PWM mode. This means that control via only one push-button is possible. Up to 10 converters (slave) can be operated on one master. Button and installation material are not included. In order to avoid inductive interferences in the secondary cable if necessary, it should be kept as short as possible and the maximum distance between power cables should be kept. For a detailed description please refer to the data sheet. History of this proven LED-Driver: TCI 122414 with output voltage up to 112V can operate up to 32 LEDs in series. Dimming is done by PWM. Preferred areas of application are street lights, or also for the operation of many e.g. LED recessed ceiling spots. Via Synchronisation lines a large number of LED spots can be elegantly operated and dimmed in master-slave operation. (End of live, Successor is 127414)

LED driver DC Mini Jolly 125400/125404 | 151400/151404  Proven LED driver 20W | 1-10V/touch dimming | 250mA - 900mA adjustable, (24V) | With strain relief or also as flush mount Version TCI #125400/125404 and 151400/151404 are the new Mini Jolly | with hybrid dimming flicker optimized or completely flicker free with AM Control. DC Mini Jolly is considered to be the "little brother" of the LED driver DC Maxi Jolly and fits through 68mm ceiling holes for e.g. recessed luminaires with LED. Multi-current or multi-voltage converter - universally applicable flicker (output ripple) <= 3% Control via 1-10V interface or push button On/Off with a short key press, brightness change via held button available in different versions (PWM, Hybrid, AM) TCI 125400/125404 (20W) is the technologically improved successor of the #123400 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used. By removing a jumper (JP4) you can switch back to "PWM-only" (incl. activation of constant voltage mode). (see 123400). In addition, further setting options for the currents have been added. TCI 151400/151404 (20W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm. Attention: No constant voltage operation adjustable. Please also read this technical article about PWM/AM/Hybrid dimming modes. As a proven multi-current converter - universally applicable. Also available as Built-In version (125404, 151404) TCI 125400 / TCI 125404 / TCI 151400 / TCI 151404 Dip-SW Performance Spg. sec Current sec # LED Position 1 13 W 20...53 V 250mA const max 15 Position 2 15 W 20...52 V 300mA const max 14 Position 3 18 W 15...50 V 350mA const max 14 Position 4 20 W 15...50 V 400mA const max 14 Position 5 20 W 5...45 V 450mA const max 12 Position 6 20 W 5...40 V 500mA const max 11 Position 7 20 W 3...37 V 550mA const max 10 Position 8 20 W 3...34 V 600mA const max 9 Position 9 20 W 3...31 V 650mA const max 8 Position 10 20 W 3...29 V 700mA const max 8 Position 11 20 W 3...27 V 750mA const max 7 Position 12 20 W 3...25 V 800mA const max 7 Position 13 20 W 3...24 V 850mA const max 6 Position 14 20 W 3...23 V 900mA const max 6 Position 15* 10 W 12 V constant 830mA max - Position 16* 20 W 24 V constant 900mA max - *digit 15/16 only available for 125400/125404 (Remove JP4 for this) Efficiency as a function of power:  84%  - 91% Flicker ( Output Ripple ) <= 3% Buttons and installation material are not included. For detailed description, please refer to the data Sheets. History (predecessor) of this proven TCI DC Mini Jolly 20W TCI 123400 (formerly 122400) with 20 Watt. Constant current, resp. voltage. All adjustable via dip switches. (123400 is identical successor of 122400 and already complies with the Ecodesign Directive). The LED current is controlled via pulse width modulation (PWM) without exception.

LED driver DC Jolly up to 32W dimmable via push button or 1-10V Suitable for 68mm ceiling holes for e.g. ceiling installation of LED spots. TCI DC Jolly: Universally dimmable over 1-10V Touch dimmer input of the DC Jolly On/Off by briefly pressing the button, changing the brightness with the button held down. Easily adjustable constant current or voltage via dip-switches. Thus a universally applicable multi-current or multi-voltage converter.  Flicker (output ripple) <= 3% available in different versions (PWM, Hybrid, AM) The Jolly US 32 can be used for to 32 watts power. Current versions offer PWM, Hybrid (AM+PWM) and AM-only regulation/dimming. TCI 126421 (up to 32W) is the technologically improved successor of #125421. (Previous models in short description see below). Its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% is there a switchover to the familiar PWM control. Thus the advantages of both methods are used. By removing a jumper (JP3) it is possible to switch back to "PWM-only" (incl. activation of constant voltage operation). (see 125421). In addition, further setting options for the currents have been added. TCI 151421 (up to 32W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suitable for Dim2Warm. Attention: No constant voltage operation adjustable as well as no operation with synchronization lines (Master-Slave) possible. Please also read this technical article about PWM/AM/Hybrid dimming modes. As a proven multi-current converter - universally applicable. Also available as Built-In version (TCI 126450, TCI 151450) Setting options of the DC Jolly series DC-Jolly US 32 Dip-SW Performance Spg. sec Current sec # LED Position 1 13 W 15...53 V 250mA const. 15 Position 2 16 W 15...53 V 300mA const. 15 Position 3 18 W 10...53 V 350mA const 15 Position 4 21 W     10...53 V 400mA const. 15 Position 5 23 W 5...52 V 450mA const. 15 Position 6 25 W 2...50 V 500mA const. 14 Position 7 27 W 2...50 V 550mA const. 14 Position 8 30 W 2...50 V 600mA const. 14 Position 9 32 W  2...49 V 650mA const. 14 Position 10 32 W 2...46 V 700mA const. 13 Position 11 20 W 2...27 V 750mA const. 7 Position 12 20 W 2...25 V 800mA const. 7 Position 13 20 W 2...24 V 850mA const. 6 Position 14 20 W 2...22 V 900mA const. 6 Position 15* 11 W 12 V const. 900mA max. - Position 16* 20 W 24 V const. 830mA max. - *Position 15/16 only available for devices with PWM/Hybrid (Remove JP3 for this) Efficiency (max.) depending on power: >88% Flicker ( Output Ripple ) <= 3% Pushbutton and installation material are not included in the package. History ( predecessor ) of the approved LED driver DC Jolly 1-10V & PUSH  TCI 122420 with up to 25 Watt. constant current, or -voltage. Everything adjustable via dip switches. The LED current is regulated without exception via pulse width modulation (PWM) ( discontinued - successor 126421)  TCI 122421/123421 with up to 32 Watt. Almost identical to the 122420 with slightly higher power and wider setting ranges for the constant currents and constant voltage outputs ( discontinued - successor 126421)  TCI 125421 with up to 32 Watt. Almost identical to the 123421 but with considerably more setting ranges for the constant currents ( discontinued - successor 126421) For a detailed description of the DC Jolly please refer to the corresponding data sheets. See tab DOWNLOADS

TCI DC Jolly DALI LED driver; dimmable; 32W The little brother of the "Maxi Jolly DALI" is considered as a link between the LED drivers: Mini and Maxi Jolly.Suitable for 68mm ceiling holes for e.g. ceiling installation of LED spots. (With sufficient ceiling distance!) TCI DC Jolly: Universally dimmable via DALI Easily adjustable constant current or constant voltage via dip-switch. Universally applicable multi-current or multi-voltage converter. Flicker ( Output Ripple ) <= 3% Available in different versions (PWM, Hybride, AM) TCI 123424 (formerly 122424) with up to 32 Watt. Constant current or voltage. All adjustable via dip-switches.(123424 is the identical successor to the 122424 and thus complies with the Ecodesign Directive)The LED current is regulated without exception via pulse width modulation (PWM).TCI 125424 (up to 32W) is the technologically improved successor of the #123424 and its innovation is the combination of PWM and AM control. This so-called hybrid control ensures absolutely flicker-free light in the range of 100% - 25% by linear control. Only in the range below 25% to 1% the known PWM control is switched over. Thus the advantages of both methods are used.By short-circuiting the NTC input when switching on, it is possible to switch between "PWM-only" including activation of constant voltage mode (compare 123424) and hybrid mode. Confirmation by single flashing (PWM), double flashing (hybrid)TCI 151424 (up to 32W) is a pure linear controller. The LED current can be dimmed linearly (AM) from 100% to 1%. Perfectly suited for use with Dim2Warm.Attention: No constant voltage operation adjustable.As a proven multi-current converter - universally applicable. Also available as Built-In version (123458, 125458, 151458).  Dip-SW Power Out Voltage Out Current Out Position 1 12 W 10...48 V max. 250mA const. Position 2 14 W 10...48 V max. 300mA const Position 3 17 W 5...48 V max. 350mA const Position 4 19 W 5...48 V max. 400mA const Position 5 22 W 5...48 V max. 450mA const Position 6 24 W 5...48 V max. 500mA const Position 7 26 W 3...48 V max. 550mA const Position 8 29 W 3...48 V max. 600mA const Position 9 31 W 3...48 V max. 650mA const Position 10 32 W 3...46 V max. 700mA const Position 11 10 W 12 V constant 900mA max Position 12 20 W 24 V constant 830mA max Efficiency depending of the power: 20W - 32W: 84% - 91% DC Jolly DALI, as all TCI converters can be connected to each other via sync-cable. Thus, the control over only one button is possible. Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves). Button and installation materials are not included in delivery. Savings tip: Master as DALI and the slaves use the cheaper variant DC Jolly without DALI. On request, this product is also available as a built-in version (ideal for device installation) with a modified design (see data sheet). For detailed description please refer to the data sheet.