DALI Relay Module | 86458629 | 86458675

€79.92*

Prices incl. VAT plus shipping costs

6 Reviews

Variation

RM8 Socket Installation (80A current peaks) 86456944 (DALI-2)

RM16 Socket Installation (8A/ 160A) 86458629

RM16-DE Ceiling Installation (160A current peaks) 86458629-DE

RM16 Ceiling Installation Changing Contact 86458629-DE-WE

RM16 DIN Rail (16A/ 160A Changing Contact) 86458629-HS-WE

RM16-CEL Wieland plug-in contacts (160A current peaks) 86458629-CEL

RM8 Din Rail (8A /80A) 86456944-HS (DALI-2)

Product number: 542-86458675-HS

Product information "DALI Relay Module | 86458629 | 86458675"

DALI RM8/RM16/RM16-DE/RM16-CEL

Module for controlling a relay contact via the DALI bus

DALI Relay Module RM8/16/16-DE/16-CEL provides a relay contact controllable via the DALI bus which can be used to switch constant loads of up to 1 or 2 kVA. DALI RM16 is particularly suited for high starting current peaks up to 160 A; it is equipped with a changeover contact which is used as a relay contact. The RM8 is suited for starting current peaks of up to 80 A; the relay contact is designed as a normally open contact.

A special feature of the switching actuator DALI Relay Module RM8/16/16-DE/16-CEL is that it maintains the switching status of the relay in the case of a bus supply failure. Any switch-on and/or switch-off delay can be programmed via the DALI bus. Thus, loads without DALI input can be incorporated in the DALI system.

Product features

Compact relay module for the direct control of 230 VAC loads via DALI
Simple incorporation of loads without DALI input into a DALI circuit; the loads can be switched on and off using DALI commands
Different variants available, suitable for your application requirements
Possibility of configuring switch-on and switch-off delays using the parameters FADE RATE and FADE TIME
DALI Cockpit is the DALI configuration tool of Lunatone which is available for free download; it can be used for configuration
DALI Relay Module RM 8/16/16-DE/16-CEL is supplied by the DALI bus; no further supply required
RM16 is particularly suitable for high starting current peaks up to 160 A
The interface represents a bus user and can be addressed accordingly

Available versions:

DALI RM16 for socket installation (manufacturer's number: 86458629) V-1605098
Maximum nominal load and nominal current: 1000VA / 8A
Maximum starting current peaks: 160A
Relay contact type: 1 changeover contact
Switching cycles at 8A/250VAC, resistive: 3x10⁴

DALI RM8 for socket installation (manufacturer's number: 86456944 (Previous 86458675) V-1605099
Maximum nominal load and nominal current: 1000VA / 8A
Maximum starting current peaks: 80A
Relay contact type: 1 normally open contact
Switching cycles at 8A/250VAC, resistive: 3x10⁵

DALI RM16 for ceiling installation (manufacturer's number: 86458629-DE) V-1623447
Maximum nominal load and nominal current: 2000VA / 16A
Maximum starting current peaks: 160A
Relay contact type: 1 changeover contact
Switching cycles at 16A/250VAC, resistive: 3x10⁴

DALI RM16 with Wieland plug-in contacts (manufacturer's number: 86458629-CEL) V-1626583
Maximum nominal load and nominal current: 2000VA / 16A
Maximum starting current peaks: 160A
Relay contact type: 1 normally open contact
Switching cycles at 16A/250VAC, resistive: 3x10⁴

Other technical data:

Power supply: via DALI-Bus
Typical current consumption: 2,7mA
Inputs: DALI
Used DALI addresses: 1
Switch-on / switch-off voltage relay contact: 250 VAC / 400 VAC
Maximum permissible switch frequency: 1Hz
Temperature: 0 °C - 45 °C
Protection class: IP20
Connecting wires profile: 0,5 - 1,5 mm²

History (Previous)

Item RM8 86458675 from Article 86456944

Dimmable/Control:	DALI

6 of 6 reviews

4.83 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Sort by

12 March 2023 00:15

n/a

30 March 2020 05:59

Dali Relay Module

Great product, only just installed but very pleased so far - easy install and well made.

22 October 2020 22:06

Optimale Ergänzung!

Genial ist die integrierte Einschaltstrombegrenzung! Es werden damit u.a. ~30 DALI EVGs automatisch vom Netz getrennt, wenn die Leuchten aus sind (~20/24h am Tag), u.a. um den Ruhestrom zu sparen. Hab die HS Version im Einsatz.

19 March 2021 07:48

n/a

17 February 2023 18:49

n/a

24 May 2022 09:44

n/a

sw_similar

DALI Button Switch Cross incl. RX Modul - 86459541

DALI button switch cross or as WDALI-Set with ReceiverRadio control module for DALI circuits with four freely programmable buttons.The wDALI switch is a DALI control module, which is connected wireless to the DALI bus. The battery operated switch can be installed at every place without any installation effort. Destination address, switching characteristic and DALI commands can be assigned To every button of the wDALI switch. The following DALI commands are available for this purpose: dim up, dim down, off, recall min., recall max., goto scene 1-16, direct arcpower ...%, mask and predefined macros. Product specifications DALI control module with 4 buttons Possibility of sending DALI commands to single addresses (0-63), groups (0-15), and broadcasts As switching function different buttons (short/long button push), switching buttons, switches etc. can be chosen Memory function for brightness with the help of macros 2 different fabrication settings are possible The wDALI switch offers the possibility to control components of the DALI circuit, without the operating device being physically connected to the DALI circuit. The wDALI switch contains of two components, an arbitrarily placeable operating device (sender unit) and a receiving unit, which is connected to the DALI bus The receiver of the DALI switch is supplied through the DALI line, there is no additional connection needed Configurable power up function, this means automatic sending of a command after a power interruption The wDALI switch can instantly used for the control of a DALI circuit with the fabrication settings Adjustments and changing of the configuration through the DALI bus with help of the DALI cockpit software Every button can be assigned to 4 destination addresses, switching functions and DALI commands The following DALI commands are available for this purpose: up, down, off, recall min/max, goto scene 1-16, direct arcpower in % and macros DALI DT8 support for the control of colour temperature of luminaires through appropriate macros Multiple wDALI switch can be used in the same DALI circuit The operating unit of the wDALI switch is designed as wall switch and can be placed freely within the receiving range of the receiver Technical data Colour: white/black Supply: Battery resp. via DALI-Bus typ. current consumption: 2 mA Output: DALI Function: programmable Frequency band: 2,4Ghz Receiving range: up to 300 m Dimensions operating unit (W x H x D): 82x82x8,5 mm Expectable battery life of the operating unit: 6 years Dimensions Receiver (W x H x D): 35 mm x 28 mm x 15 mm Temperature: -10 °C - 50 °C Protection type: IP54 Connecting wire section: 0,5 - 1,5 mm2

Variants from €146.00*

€139.05*

Details

DALI control module Analog DALI 100 kOhm

Lunatone DALI control module Analog DALI 100 kOhm DALI control module with analog input for connecting a 100k potentiometer With the DALI 100k, the luminaires in a DALI circuit can be controlled with a 100kOhm potentiometer. Product characteristics: Compact control module with analog input for direct connection of a 100k potentiometer The input signal is directly converted into a DALI dimming value The conversion can be triggered periodically or by a trigger A change of the input signal (>2%) is used as the event trigger for the conversion. The dimming value can be sent to individual addresses, groups and broadcast Configuration via DALI-Cockpit and DALI-USB Interface Configuration via DALI-Cockpit and DALI-USB Interface Multimaster capable, multiple modules can be installed in a DALI circuit The module can be inserted in a flush-mounted box directly behind the potentiometer The module is supplied directly via the DALI line Technical data: Supply: from DALI bus Typical current consumption: <3 mA Inputs: 100k Potentiometer Output: DALI Temperature: 0 °C - 50 °C Protection class: IP20 Connecting wires Cross section: 0.5-1.5 mm2 max. cable length push-button module: 50 cm Dimensions (L x W x H): 40 mm x 28 mm x 15 mm

€41.50*

DALI Control Module Sequencer 86459582

DALI control module sequencer for automatic sequences DALI command sequences can be played with the DALI sequencer. Both sequential scene calls and user-defined command sequences are supported. Product characteristics Compact control module, enables automatically running sequences Memory for up to 4 sequences A command sequence can consist of up to 19 DALI commands The module fits into a flush-mounted box Types for back box and dinrail mounting Din rail type provides 4 switching inputs for mains voltage A sequence can consist of any command sequences or scene calls If the sequencer is assigned to a group, a running sequence can also be stopped with group and broadcast commands The sequence can be executed once or cyclically Simple configuration via DALI cockpit y calling up scenes 0-3 at the sequencer address, the corresponding sequences can be started The module draws 2mA from the Dali circuit, an additional supply is not necessary Multimaster capable, multiple master modules can be installed in a DALI circuit Technical Data: Type DALI Sequencer Article number 86459582 86459582-HS Suppy via DALI- Bus typ. current consumption 2 mA Control DALI Input DALI DALI 4 switching inputs (mains voltage) Function programmierbare Sequenzen Temperatur 0 °C - 50 °C Protection class IP20 Connecting wire cross section 1.5 mm² 2.5 mm² Mounting back box dinrail, 1TE Dimensions 39,7mm x 28mm x 14mm 98mm x 17.5mm x 56mm

Variants from €212.09*

€201.99*

Details

DALI GC/GC-A group control module

DALI GC/GC-A group control module Module for the control of two predefined DALI groups with a conventional light buttonThe DALI GC and GC-A are control units for the control of 2 DALI groups. With help of this compact module, light switches or buttons can send dimming and switching commands to two DALI groups.A rotary switch on the housing DALI GC/GC-A offers the possibility to preselect the DALI resp. luminaire group. The modules are installed in the flush-mounted box behind the light switches and get their supply directly from the DALI-Bus. Product specifications The DALI GC offers in contrast to the DALI GC-A the possibility, to address luminaires and add them to groups resp. delete them. Compact control module to generate switching or dimming commands for two DALI groups With help of a rotary switch on the module housing the selection of the DALI groups that are addressed happens. The inputs can be controlled with standard buttons Multiple modules can be installed within a DALI circuit The module can be installed in a flush-mounted box or directly behind the light button The supply of the module happens directly through the DALI line and doesn't have to be connected to the grid The buttons are connected directly to the module (make potential-free contact) Technical data: Supply: via DALI bus Current consumption: 6 mA Inputs: 2 buttons single/double Outputs: DALI (broadcast) Groups: 2 of 16 (broadcast) Group selection: rotary switch Temperature: 0 °C - 50 °C Protection type: IP20 Connected wires: 0.75 mm2 Connected length: 250 mm

Variants from €56.87*

€54.16*

Details

DALI SC/SC-A Scene Control Module

DALI scene control module Module for the call up of DALI scenes with conventional light buttons The DALI SC / SC-A is a control unit for the call up of DALI scenes. With help of a rotary switch on the backside of the can be defined, which of the 16 possible scenes are called up with a button push. The 4 independent button inputs can be assigned to 4 light scenes. The modules find room in the flush-mounted box behind the light button. The customary light buttons is becoming a DALI scene switch with this. The supply of the module happens via DALI Bus. Product specifications The DALI SC offers in contrast to the DALI SC-A the possibility, to program light scene values in DALI operating units. Compact control module for the call up of light scene values in DALI operating units With the a adjustment of a rotary switch on the module the scenes can be preselected, which can be called up via button push The inputs can be switched with standard buttons Multiple modules can be installed DALI circuit The Module can be laid into a flush mounted box, directly behind the light button The supply of the module happens directly through the DALI line The buttons are connected directly to the module (potential-free make contacts) Technical data: Supply: via DALI bus Current consumption: 6 mA Inputs: 4 buttons Output: DALI (broadcast) Scenes: 4 of 16 Scene selection: Rotary switch on the back of the module Temperature: 0 °C - 50 °C Protection type: IP20 Connecting wires: 0.75 mm2 Connecting length: 250 mm

Variants from €56.87*

€54.16*

Details