LED PowerSupply 160W

TCI Jolly DIN 32 LED Driver for Top Hat Rail; 1...10V & Push dimmable TCI 127100 32 Watt, selectable constant current via dip-switch. DIN rail LED Driver. Multi-current-converter - suitable for DIN rails / top hat rails. Control via 1...10V interface or Push-Button. On/off by a short push. Brightness can be changed by a longer push. Flicker ( Output Ripple ) <= 3%  Dip-SW  Power out  Voltage out  Current out  # LED  Position 1  10 W  50 V max.  200mA const.  max 16  Position 2  13 W  52 V max.  250mA const.  max 16  Position 3  16 W  53 V max.  300mA const.  max 16  Position 4  19 W  53 V max.  350mA const.  max 16  Position 5  21 W  53 V max.  400mA const.  max 16  Position 6  24 W  53 V max.  450mA max.  max 14/15  Position 7  27 W  53 V max.  500mA max.  max 13/14  Position 8  29 W  53 V max.  550mA max.  max 13/14  Position 9  32 W  53 V max.  600mA max.   max 13/14  Position 10  32 W  49 V max.  650mA max.   max 12/13  Position 11  32 W  46 V max.  700mA max.   max 12  Position 12  32 W  42 V max.  750mA max.   max 12  Position 13  32 W  40 V max.  800mA max.   max 10 Efficiency depending of the power: >88%     All tci Jolly converter can be connected to each other via sync-cable. Thus, the control over only one button is possible. Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves). Button and installation materials are not included in delivery.   For detailed description please refer to the data sheet.

HLG-185H-12/24 The HLG-185H-12/24 is a high performance dust - and waterproof AC-to-DC LED power supply up to 185W. The Meanwell HLG185H - the LED switching power supply is suitable in execution, for example -12A, perfect for for performance among others with 12V lamps, such as low-voltage LED spotlight MR16 / GU5.3 or MR11 and LED Stripes. The high power (up to 185W), many LED lamps can be switched to a single transformer.Saving of costs! Even in outdoor applications is the HLG185 very suitable due to high protection. It is also possible to dim via an additional input (Typ B) HLG185H features (depends on type): 7 Years manufacturers warranty Universal alternate current up to 305VAC IP65 for indoor or outdoor installations Built-in active PFC function Protections: over -/laod, -/voltage, -/temperature Cooling by free air convection Three possibilities of dimming via 1-10 V, PWM or resistance OCP point adjustable through output cable or internal potentiometer Type H for use Class I Zone 2 (gases and vapors) IP65/IP67 for outdoor installations LED lighting especially street lighting applications Compliance to worldwide safety regulations for lighting  Performance HLG-185H Typ - 12/24 A: IP65 rated. Output voltage and and constant current level can IP65 design for indoor or outdoor installations be adjusted through internal potential meter.   Performance HLG-185H Typ - 12/24 B: Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer IP67 protection. For indoor -and outdoor applications Technical data to Meanwell power supply HLG 185W: Execution For LED and lighting applications Model Switching power supply, Performance H Input  90 - 305 VAC / 127 - 431 VDC 47 -63 Hz Rated Power 156 - 186,3 W (voltage depending, see datasheet) Surge solidity 4 kV Output operating parameters  See data sheet Design  HLG Approbation  UL / EN Class C Dimension 228mm x 68mm x 38,8mm (H x W x D)  On request, we also offer the type D or other voltage ranges.

HLG150H-12/24 The HLG150H-12/24 is a high performance dust - and waterproof AC-to-DC LED power supply up to 150W. The Meanwell HLG150H - the LED switching power supply is suitable in execution, for example -12A, perfect for for performance among others with 12V lamps, such as low-voltage LED spotlight MR16 / GU5.3 or MR11 and LED Stripes. The high power (up to 150W), many LED lamps can be switched to a single transformer.Saving of costs! Even in outdoor applications is the HLG150 very suitable due to high protection. It is also possible to dim via an additional input (Typ B) HLG150H features (depends on type): 7 Years manufacturers warranty IP65 for indoor or outdoor installations Cooling by free air convection Built-in active PFC function Protections: over -/laod, -/voltage, -/temperature IP65/IP67 for outdoor installations Three possibilities of dimming via 1-10 V, PWM or resistance OCP point adjustable through output cable or internal potentiometer Universal alternate current up to 305VAC Type H for use Class I Zone 2 (gases and vapors) Compliance to worldwide safety regulations for lighting LED lighting especially street lighting applications  Performance HLG150H Typ - 12/24 A: IP65 design for indoor or outdoor installations IP65 rated. Output voltage and and constant current level can be adjusted through internal potential meter.   Performance HLG150H Typ - 12/24 B: Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer IP67 protection. For indoor -and outdoor applications   Technical data to Meanwell power supply HLG 150W: Execution For LED and lighting applications Model Switching power supply, Performance H Input  90 - 305 VAC / 127 - 431 VDC 47 -63 Hz Rated Power 150 - 151,2 W (voltage depending, see datasheet) Surge solidity 4 kV Output operating parameters  See data sheet Design  HLG Approbation  UL / EN Class C Dimension 220mm x 68mm x 38,8mm (H x W x D)  On request, we also offer the type D or other voltage ranges.

HLG120H-12/24 The HLG120H-12/24 is a high performance dust - and waterproof AC-to-DC LED power supply up to 120W. The Meanwell HLG120H - the LED switching power supply is suitable in execution, for example -12A, perfect for for performance among others with 12V lamps, such as low-voltage LED spotlight MR16 / GU5.3 or MR11 and LED Stripes. The high power (up to 120W), many LED lamps can be switched to a single transformer.Saving of costs! Even in outdoor applications is the HLG120 very suitable due to high protection. It is also possible to dim via an additional input (Typ B) HLG120H features (depends on type): 7 Years manufacturers warranty IP65 for indoor or outdoor installations Cooling by free air convection Built-in active PFC function Protections: over -/laod, -/voltage, -/temperature IP65/IP67 for outdoor installations Three possibilities of dimming via 1-10 V, PWM or resistance OCP point adjustable through output cable or internal potentiometer Universal alternate current up to 305VAC Type H for use Class I Zone 2 (gases and vapors) Compliance to worldwide safety regulations for lighting LED lighting especially street lighting applications  Performance HLG120H Typ - 12/24 A: IP65 design for indoor or outdoor installations IP65 rated. Output voltage and and constant current level can be adjusted through internal potential meter.   Performance HLG120H Typ - 12/24 B: Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer IP67 protection. For indoor -and outdoor applications   Technical data to Meanwell power supply HLG 120W: Execution For LED and lighting applications Model Switching power supply, Performance H Input  90 - 305 VAC / 127 - 431 VDC 47 -63 Hz Rated Power 120 - 124,2 W (voltage depending, see datasheet) Surge solidity 4 kV Output operating parameters  See data sheet Design  HLG Approbation  UL / EN Class C Dimension 220mm x 68mm x 38,8mm (H x W x D)  On request, we also offer the type D or other voltage ranges.

Meanwell ELG-150-xx"Type" The Meanwell power supply ELG-150 Series includes a constant voltage source as well as a constant current source.It has an output power of 150 watts and output voltages from 12V to 54V so that various LED applications such as road-, indoor-, and architectural- lighting can be realized.With its metal housing and IP65 / IP67 the use for indoor and outdoor applications in the temperature ranges from -40 ° C to 85 ° C is possible.Depending on the type the connected LED illumination can be dimmed via 0-10V, PWM signal, potentiometer or DALI interface. ELG150 features (depends on type): 5 Years warranty Universal input voltage from 100V up to 305V AC High efficiency up to 90% Built-in active PFC function Protections: over -/load, -/voltage, -/temperature Type "?HL?" for use in Class I, Division 2hazardous (Classified) location IP65/IP67 for indoor or outdoor installations Standby power consumption < 0.5W Compliance to worldwide safety regulations for lighting Performance ELG-150 Typ -xx"-"(Blank): Current and voltage output fixed IP67 protection. For indoor -and outdoor applications Performance ELG-150 Typ -xx"A": Output voltage and current level adjustable through built-in-potentiometer IP65 design for indoor or outdoor installations be adjusted through internal potential meter Performance ELG-150 Typ -xx"B": Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer IP67 protection. For indoor -and outdoor applications Performance ELG-150 Typ -xx"DA": Lightning control via DALI interface IP67 protection. For indoor -and outdoor applications Technical data Meanwell ELG-150 Power Supply: Input 100 - 305 VAC  / 142 - 431 VDC 47 - 63 Hz Output Depending on type, see data sheet Rated Power 84 - 151,2 W (voltage depending, see datasheet) Series ELG Typical lifetime > 50.000 h Dimensions (LxWxH) 219mm x 63mm x 35,5mm For further technical data, please refer to the data sheet (in tab "DOWNLOADS").On request, we also offer type and voltage ranges.

LED-Powersupply for perfect dimming of LED-Stripes PWM-120 series is a 120W AC/DC LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. PWM 120 operates from 90~305VAC and offers models with different rated voltage ranging between 12V and 48V. Thanks to the high efficiency up to 90.5%, with the fanless design, the entire series is able to operate for -40 ? ~ +90 ? case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for dry, damp or wet locations. PWM120 is equipped with dimming function that varies the duty cycle of the output, providing great flexibility for LED strips applications. Features of PWM-120 from Meanwell Constant voltage PWM style output with frequency 1.47kHz Plastic housing with class II design Built-in active PFC function No load power consumption <0.5w / standby power consumption <0.5W(DA-type) Fully encapsulated with IP67 level Function options: 3 in 1 dimming (dim-to-off); DALI Typical lifetime>50000 hours 5 years warranty Applications LED strip lighting Indoor LED lighting LED decorative lighting LED architecture lighting Type "HL" for use in class I, division 2 hazardous (classified) location. Technical data:  Input  90 - 305 VAC / 127 - 431 VDC 47 - 63 Hz  Output  Depending on type, see data sheet  Rated Power  120W - 122,4W  Protection class  IP67  Typical lifetime  >50.000h  Dimensions ( L x W x H)  191 x 63 x 37,5mm For further technical data, please refer to the data sheet (in tab "DOWNLOADS"). On request, we also offer type and voltage ranges.

KNX LED-dimmer Chromoflex for RGB (W) stripes from Pur-LED The control unit was designed for indoor areas. With this device, up to 4 output channels can be controlled via a KNX bus. In addition, the number of output channels used, the type of dimming curve and others can be set via the ETS software.The KNX LED dimmer is designed for temperatures up to 80 ° C.It was developed according to the guidelines of the "KNX Association". KNX is a standardized digital communication interface in the field of building automation. Technical data: Operating voltage 10V to 48V DC Protection III Output current max 2,2A per channel Dimensions (L/W/H) 180 / 52 / 22 mm Own power consumption (without LED): ca. 5 - 20mA Ambient temperature 0°C - max. +50°C Protection type IP20 Further information can be found in our download tab.

The Enertex® KNX 4-channel LED dimming sequencer 5A is a pulse width modulating dimmer and sequencer for LED strips, LED spots and LED lights for constant input voltage 12 - 24VDC. Attention: This Product is not in Production anymore. Successor is Article 1174. Four dimming channels, pulse width modulated, max. 5 A per channel Optimal load distribution of the channels within a PWM period enables, among other things, the efficient use of tunable white lamps and reduces the switching load on the upstream LED power supplies Variable voltage input and output 12 - 24V Integrated bistable 230 VAC relay 16 A, inrush 165A@20ms, 800A@200µs Integrated protection against overvoltage, overcurrent, undervoltage, overtemperature, reverse polarity Commissioning button for quick testing of the wiring Dimmer addressable in RGB mode or HSV color space mode Four different dimming characteristics to choose from with integrated soft dimming function Automatic switching on/off of the relay with two configurable blocking times Integrated Scenes and Bitscenes 16 predefined and five freely definable sequences Free configuration of the channels: Four independent channels Two channels white&rszlig; (cold white / warm white) One Channel Whiteß (cold white / warm white), two independent channels One channel color (RGBW) One color (RGB) channel, one independent channel Diagnostics/reporting of the protective functions via KNX group addresses PWM switchable between 488 and 600 Hz REG version - DIN rail housing with 4 HP See our download tab for more information.

Enertex® KNX LED dimming sequencer 20A/5x as REG and for ceiling installation The Enertex® KNX LED Dimming Sequencer 20A/5x is a pulse width modulating 5-channel dimmer for 5 - 48 V LED modules. The dimmer can dim up to 20 A LED current per channel and a maximum total output of 480 W. The dimmer is suitable for any LED light source that is suitable for DC constant voltage. Since the overcurrent shutdown of the dimming sequencer was designed to be very robust against false triggering with high inrush current pulses, it is also particularly suitable for lamps that have very high inrush current pulses. With the help of the display and the control buttons, the installation of the complete lighting can be tested and commissioned without ETS software. via the menu; the various dimming curves, PWM frequencies and dimming speeds for the connected lamps can also be tested on the display. By being able to choose from four predefined dimming curves in connection with a dimming frequency between 211 Hz and 1200 Hz, a suitable configuration for gentle and flicker-free dimming can be found for almost all light sources. The device has reverse polarity protection, overvoltage and undervoltage protection, overtemperature protection and overcurrent protection that works selectively. During operation, the device measures the current current and power in each channel, the DC input voltage, the device temperature and the telegram rate. To record the electricity costs for the lighting, the device provides energy and cost counters for each channel using communication objects. In the application, the independent channels can be used in any combination of cold white; / warm white, as color channels or as individual channels. Current RGBCCT lamps (red, green, blue, cold white, warm white) are also optimally supported. These lamps are perfectly staged with an automatic white balance (RGB-Extended) developed by Enertex or the extended Tunable White color temperatures, which are generated by automatically adding R/G/B (TW-Extended). The colors can be controlled either via the primary colors red, green and blue (RGB color mode) or via hue, saturation and brightness (HSV color mode). The dimmer supports 8-bit and 1-bit scenes and also enables individual channels/channel groups to be blocked using communication objects. Five sequences, i.e. sequences of color or color temperature controls in the range from seconds to hours with gentle color changes can either be defined by the user himself or assigned over 20 predefined color sequences. Different switch-on behaviors for day and night are also supported, as is time-controlled dimming of channels/channel groups. The latter enables, among other things, a time-of-day-dependent white light control (Human Centric Lighting / HCL) in Tunable White mode. The base points can be specified either as absolute times or relative to sunrise or sunset (astro function). The bus communication can optionally be encrypted using KNX Data Secure. Two variants:   Series installation version (REG) - DIN rail housing with 4 HP and Ceiling mount version (DK) - Double furniture mark Five dimming channels, pulse width modulated, max. 20 A per channel Dimming power up to 480 W Variable voltage input and output 5 - 48V Also suitable for lamps with high inrush currents (up to 100A) Integrated protection against overvoltage and undervoltage, overcurrent (selective), overtemperature, reverse polarity Additional power supply and lamp protection features Helpful commissioning functions via display and button Free configuration of the channels: 5x single channel (EK) 1x RGBCCT 1x RGBW + 1x EK 1x RGB + 2x EK 1x RGB + 1x Tunable White (TW) 2x TW + 1x EK 1x TW + 3x EK Dimmer addressable in RGB mode or HSV color space mode Four dimming curves with soft dimming and PWM frequencies between 200 and 1200 Hz for optimal dimming results RGBCCT - RGBW: Extended white balance or expansion of the tunable white color temperatures by automatically adding R/G/B Automatically mimics the color temperature of incandescent lamps (Dim2Warm) Time-controlled dimming and daylight-controlled white light (Human Centric Lighting / HCL) Staircase light function More than 20 predefined and up to five freely definable sequences in RGB or TW operating mode Integrated scenes, bit scenes and locking functions Measurement of voltage, power, temperature, telegram rate and current per channel Channel dependent energy and cost counters Control of an external KNX switching actuator to switch off the LED power supply unit Easy installation: no external fuses and distribution terminals required, approved for cable lengths of up to 50m Intelligent pulse pattern generation to equalize the power pack load (increases the service life of the LED power packs) Optional encrypted communication with KNX Data Secure protocol More information can be found in our download tab.