CASAMBI interface configurable to " DMX ". For convenient control of operating devices and luminaires with DMX signal Input Controlled by a smart device (Apple, Android) with the CASAMBI app Configure different control modes (1..8 channels, TW, D2W, RGB(W)), before  coupling into the network: Change profile Gateway is not required, but setup is possible Integrated antenna / external antenna, do not cover Connection cable for primary side connection   Technical data:   Item number, Installation housing       808899 Type Installation housing IBTDMX8 Supply input 12....36VDC Radio signal 2,4..2,483 GHz; 4 dBmType Installation housing Signal output DMX max. 120mA Ambient temperature (ta) -20.. +45 °C Max. desisgn temperature (tc) 55 °C Dimensions 61 x 29 x23 mm ( without cable)   You can conveniently control all settings via the free CASAMBI app (Apple / Android): CASAMBI QR Code and links (here directly to the download) Casambi app in the app store Casambi app for Android For further information and connection diagrams of the Casambi interface, please refer to the data sheet (in the download tab).  

DALI converter for the converting of 0-10V analog signals to DALI With the compact interface module by Lunatone, the converting of analog signals (0-10V) into digital DALI signals happens easily. Choose your preferred model of the DALI converter from the variants with resp. without OFF-function and a dimming range of either 1-100% or 10-100% now. Overview of the specifications of the DALI converter: The read in 0-10V voltage is issued on the DALI-subcircuit via broadcast . A changing of the 0-10V input voltage (>1%) is used as event trigger. A linear 100k-potentiometer can be directly connected to the 0-10V to DALI converter.. The module is supplied by a 12-24V power supply or a DALI-circuit, at any polarity. Compact interface module for the converting of 0-10V control signals into DALI (Direct Arc Power Level). Integrated bus supply for the DALI-subcircuit with up to 4 standard-DALI charges (10mA), expansion for up to 64 charges is possible with a DALI-expander. The standart application for the 0- 10V to DALI converter is therefore the direct control off up to 4 DALI-EVGs with a 0-10V control unit. A galvanic isolation between DALI-output (10mA) and 0-10V input resp. 24V-supply can be realised with a DALI-expander Various variants for different output cable areas, as well as switch-on and switch-off conducts are available.     Technical data:   Type 0-10V / DALI converter Function: converter Typical electricity demand: 4,1mA + electricity demand for the DALI subcircuit Output: DALI, Imax = 10 mA Power supply: 12 V - 24 V at any polarity Input: 0 - 10 V Protection type: IP20 Wirelength to the 0 - 10 V control unit: 50 cm Connection wire section: 0,5 - 1,5 mm2 Temperature: 0 °C - 50 °C Dimensions (LxWxH): ca. 40x28x15 mm These variants with the following specifications are avialable:   Active and passive input available (universal use and replace the following versions gradually): with OFF-function (1%-100%): 86468352-001 with OFF-function (10%-100%): 86468352-010 without OFF-function (1%-100%): 86468352-101 without OFF-function (10%-100%): 86468352-110   Active input (module provides the power supply, direct connection of a (linear) 100k?-potentiometer is possible, phaseout): with OFF-Funktion (1%-100%): 86468352-001-A with OFF-Funktion (10%-100%): 86468352-010-A without OFF-Funktion (1%-100%): 86468352-101-A without OFF-Funktion (10%-100%): 86468352-110-A Passive input (the module provides no voltage, suitable for the control of  a 0-10V analog signal, phaseout): with OFF-function (1%-100%): 86468352-001-P with OFF-function (10%-100%): 86468352-010-P without OFF-function (1%-100%): 86468352-101-P without OFF-function (10%-100%): 86468352-110-P

For the implementation of 0-10V control on DALI with integrated DALI PSThe compact interface module converts 0-10V control signals into DALI dimming values. With this module you can choose from different dimming characteristics. The converter has a passive and active 0-10V input and can supply up to 10 standard DALI loads.The integrated power supply of the interface is achieved by changing the 0-10V input voltage. This changed voltage is less than 1%. The module is supplied with 12-24V.By inserting a DALI expander you can achieve a galvanic isolation between the ballasts connected to the DALI output and the 0-10V input.Overview 0-10V to DALI Converter 30mA: Compact interface module for the conversion of 0-10V control signals to DALI dim levels The interface module provides a 30mA DALI power supply for up to 10 standard DALI ballasts, up to 64 ballasts controllable with the help of a DALI-Expander Passive and active 0-10V input The converted value is sent broadcast on the DALI subnet A change in the 0-10V input voltage signal (>1%) is used as trigger event The interface module requires a 12-24V power supply Easy set up of the dim characteristic with the help of jumpers A galvanic isolation between the ballasts connected to the DALI-output (30mA) and the 0-10V signal input (and 24V supply input) can be realised with the help of a DALI-expander Technical data for 86468352-HS: Supply voltage: 12V-24V Typ. current consumption: 4mA + current for DALI output Input: 0-10V, passive oder active Output: DALI Imax=30 mA Function: signal converter, selection of dim characteristic with jumper Mechanical data: Ambient temperature: -20°C to +60°C Protection class: IP20 Maximum connecting wire cross section : 0,5 - 2,5 mm² Mounting: DIN rail Dimensions: 98 x 17.5 x 56 mm More information about this product can be found in the data sheet under the Download tab.

1-channel LED 1-10V Dimmer The 1-channel LED 1-10V PWM dimmer, 12-36VDC, 1x8A from PUR-LED with Analog input for electronic dimmers. The search for the ideal constant voltage source with 1-10V is over. With this 1-10V dimmer the system can be extended easily and reliably. Details on the wiring of the 1-channel 1-10VLED dimmer can be found in the data sheet. Technical data: Power supply: 12-36VDC Input signal: 1-10V active voltage Output voltage: 1 x 12-36VDC Output current: max. 8A Power output: 96W @ 12VDC 192W @ 24VDC 192W @ 36VDC Dimming function: 0-100% Temperature range: -20 - + 50°C Dimensions (LxWxH) in mm: 100 x 38 x 20

1Ch 0-10V LED PWM Dimmer / Booster Control Gear ED driver (CV) with one channel, can be operated as PWM Booster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz) If operated with 100kO potentiometer or 0-10V control devices (active and passive), the device functions as Dimmer. Overview: 1 channel LED dimmer Suitable for constant voltage LED-modules Control signals: PWM (50Hz-1kHz), 100kOhm potentiometer, 0-10V voltage signal (active and passiv) Logarithmic dimming curve Analog input: connection of a 100kOhm potentiometer or a 0-10V control device (active or passive), the 0-10V input signal is transformed in a corresponding PWM output signal PWM control signal: suitable for operation with a LED-dimmer with common plus connector Supply voltage of 12V to 48V DC Maximum current: 16A Suitable for remote ceiling   Electrical data   Supplx 12VDC-48VDC Maximum input current 16A Control input PWM (50Hz-1kHz) 100kOhm potentiometer 0-10V active/passive Technical data   Expected lifetime (at Tc<=75°C) >50000h Max. connecting wire crosssection 2.5 mm² Protection class IP20 Mounting Deckeneinwurf Dimenions (LxWxH) 120mm x 30mm x 22mm RECOMMENDATION: Care should be taken on keeping cable lengths between DC power supply and dimmer as well as between dimmer and luminaires (Led-Strings) as short as possible. This kind of installation will minimize the influence of voltage drops. For further information please refer to the data sheet in the Download tab.

Multi channel DALI constant current (CC) dimmer by Lunatone Every channel of the DALI constant current dimmer has its own DALI address Configuration and control via DALI For the direct control of LED modules with current input The outputs are dimmable from 1% to 100% Different variants for 350mA per channel in a small housing, further 1000mA per channel in a big housing are available Configuration via DALI cockpit and DALI USB interface Integrated short protection The following versions are available: Two channel versions, with 2 DALI addresses each (one address per channel) Up to max. 2x 350mA output currents: 89453845-350With a collectice positive pole: 89453845-350DEWith a collectice minus pole: 89453845-350GMDEUp to max. 2x 500mA output currents: 89453845-500With a collectice positive pole: 89453845-500DEWith a collectice minus pole: 89453845-500GMDEUp to max. 2x 700mA output currents:With a collectice positive pole: 89453845-700With a collectice minus pole: 89453845-700GMUp to max. 2x 1000mA output currents: With a collectice positive pole: 89453845-1000With a collectice minus pole: 89453845-1000GM  Three channel versions, with 3 DALI addresses each (one address per channel) Up to max. 3x 350mA output currentWith a collective positive pole: 89453846-350With a collective minus pole: 89453846-350GMUp to max. 3x 500mA output currentWith a collective positive pole: 89453846-500With a collective minus pole: 89453846-500GM  Up to max. 3x 700mA output currentWith a collective minus pole: 89453846-700GM Four channel versions, with 4 DALI addresses each (one address per channel) Up to max. 4x 350mA output currentWith a collective positive pole: 89453855-350With a collective minus pole: 89453855-350GMUp to max. 4x 500mA output currentWith a collective positive pole: 89453855-500With a collective minus pole: 89453855-500GMUp to max. 4x 700mA output currentWith a collective minus pole: 89453855-700GM  Other technical data: Output voltage range: 3V-45V (with 48V supply) Supply: 12VDC-48VDC resp. 56VDC Control input: DALI Temperature: -15 °C - 50 °C resp. -20 °C - 60 °C Protection type: IP20 Condition after return: depends on the DALI settings Max. cross wire section: up to 2,5 mm² Dimensions: Check the data sheet

Multi channel DALI constant current (CC) dimmer by Lunatone Every channel of the DALI constant current dimmer has its own DALI address Configuration and control via DALI For the direct control of LED modules with current input The outputs are dimmable from 1% to 100% Different variants for 350mA per channel in a small housing, further 1000mA per channel in a big housing are available Configuration via DALI cockpit and DALI USB interface Integrated short protection The following versions are available: Two channel versions, with 2 DALI addresses each (one address per channel) Up to max. 2x 350mA output currents: 89453845-350With a collectice positive pole: 89453845-350DEWith a collectice minus pole: 89453845-350GMDEUp to max. 2x 500mA output currents: 89453845-500With a collectice positive pole: 89453845-500DEWith a collectice minus pole: 89453845-500GMDEUp to max. 2x 700mA output currents:With a collectice positive pole: 89453845-700With a collectice minus pole: 89453845-700GMUp to max. 2x 1000mA output currents: With a collectice positive pole: 89453845-1000With a collectice minus pole: 89453845-1000GM  Three channel versions, with 3 DALI addresses each (one address per channel) Up to max. 3x 350mA output currentWith a collective positive pole: 89453846-350With a collective minus pole: 89453846-350GMUp to max. 3x 500mA output currentWith a collective positive pole: 89453846-500With a collective minus pole: 89453846-500GM  Up to max. 3x 700mA output currentWith a collective minus pole: 89453846-700GM Four channel versions, with 4 DALI addresses each (one address per channel) Up to max. 4x 350mA output currentWith a collective positive pole: 89453855-350With a collective minus pole: 89453855-350GMUp to max. 4x 500mA output currentWith a collective positive pole: 89453855-500With a collective minus pole: 89453855-500GMUp to max. 4x 700mA output currentWith a collective minus pole: 89453855-700GM  Other technical data: Output voltage range: 3V-45V (with 48V supply) Supply: 12VDC-48VDC resp. 56VDC Control input: DALI Temperature: -15 °C - 50 °C resp. -20 °C - 60 °C Protection type: IP20 Condition after return: depends on the DALI settings Max. cross wire section: up to 2,5 mm² Dimensions: Check the data sheet

4-channel DALI dimmer for 12V and 24V / DT8 mode 8006504-channel LED dimmer 800650: 4-channel LED dimmer for constant voltage control only by DALI with SELV potential, 4 channels with consecutive addresses, adjustable: ?Press a button for a long time until display flashes (address of first channel). ? press right/left to set ?Press long to save or address by DALI Control. 4-channel LED dimmer DT8 808660: 4-channel DALI² DT8 LED dimmer for LEDs for constant voltage. Suitable for control via CASAMBI interfaces in DT8 mode Controlled only by DALI with SELV potential DALI Select start address (4 consecutive addresses): - press right button (0..9) long until display flashes (address of first channel) - press right / left to set - press right long to save - or addressing by DALI Control Set operating mode: - Press both buttons long until display flashes, press one button to select working mode - nn: for single-colour LED strips, all channels the same - R9: for RGBW LED bands - 7c: for Tunable White LED bands - H4: for settings via XY-coordinate - Press and hold both buttons to confirm selection Specifications of the 4-channel LED dimmers: Product No. 808660 (DT8 Version) 800650 800651 (only on request) Type DU4DA8-14-480 4-channel DALI² DT8 LED dimmer   DU4DA14-480 4-channel DALI LED Dimmer DU4DA14-768 Input voltage 12..24 VDC 12..24 VDC 12..24 VDC Output voltage 12..24 VDC 12..24 VDC 12..24 VDC Output power at 12V 4x60 W4x60 W 4x60 W 4x96 W Output power at 24V 4x120 W 4x120 W 4x192 W PWM frequency 1500 Hz 2000 Hz 2000 Hz Control current max. 2 mA 1,5 mA 1,5 mA Max. Rated temperature tc 75 °C 75 °C 75 °C Dimensions 170 x 53 x 29 mm 178x46x20 mm 170x59x29 mm For more information please refer to the data sheets in the Download-Tab.

Battery-free Casambi remote control with 4 programmable buttons This elegant remote control is used to control Casambi devices. Thereby, the Casambi remote control allows a variety of dimming options, such as scene and color control. Another highlight is that the energy for the radio signal is generated by kinetic energy when the button is pressed. Due to the so-called energy harvesting, the Casambi remote control does not require a battery, and is also maintenance-free. Product Overview / Features: Batteryless remote control for controlling Casambi-enabled devices Dimming functions among 4 programmable buttons (simple dimming, scenes, color, ...) The Casambi remote control has a range of up to 10 meters in the same room Robustness to extreme external temperatures in a range of -20°C to +65°C No battery required and maintenance-free, as kinetic energy (button press) is used to generate the energy for the radio signal Using the free app from CASAMBI (Apple / Android) you comfortably control all settings (downloads below in the description) Regulate the brightness Configuring luminaires and luminaire networks Creating scenes and animations New devices are automatically detected Intelligent timer and gallery functions Set sharing options (only me, everyone, only with password, ...) Notes: It should be noted that the initial programming of the buttons of the Casambi remote control must be done via smart device (smartphone or tablet). For this, the Casambi app as well as an NFC interface are used. Technical data: Part number 808897 Type RC4EMEBTB Radio frequency 2.4..2.483 GHz; 0.4 dBm Range Up to 10 meters in the same room Estimated lifetime 50,000 actuations Ambient temperature -20..+65 °C Dimensions 120 x 52 x 19 mm Experience the new application versatility of CASAMBI. Through Casambi, you can conveniently control your lighting via smartphone or tablet, wirelessly and easily individually. The control runs via Casambi LE (low energy). If several Casambi modules are in use, a so-called "mesh network" is built up. Each additional Casambi module increases the range, because each module establishes a direct connection to all others.Your lights can now not only dim, turn on and off, but the timer function allows you to implement time controlled lighting. In the process, a maximum of 3 lights can be combined into a group, light scenes can be stored, and much more.The compact modules are mounted quite simply in front of the luminaire, so that no additional cables need to be laid. The setup is extremely simple, all components are automatically recognized in the network and in the app. CASAMBI QR code and links: Casambi App in App Store Casambi App for Android Selection of introductory videos for CASAMBI: What CASAMBI can do! First steps Set up scenes Set up XPRESS switch You can find many other supporting videos about Casambi at YouTube . For more information, please refer to the data sheet in the download tab.

Mini Tasterinterface 4 Fach mit Casambi Steuerung // 808921 Das 808921 Mini Interface von Arditi ist eines der neuen Produkte von Arditi. 4-fach Tasterinterface zur Steuerung von Casambi-fähigen Geräten innerhalb von CASAMBI Netzwerken komfortabel zu programmieren mit Tablet oder Smartphone (Apple, Android) mit der CASAMBI App 4 Eingänge für Taster (Schließer) frei programmierbar Taster müssen entsprechend Versorgungsspannung isoliert sein Geeignet zur Montage in Unterputzdose   Artikelnummer 808921 Typ RE2304NBT Versorgungseingang 220...240 Vac: 50..60HZ Funksignal 2,4..2,483 GHz; 4 dBm Stromaufnahme < 150 mA Umgebungstemperatur (ta) 0...+ 55°C Anzahl Tastereingänge 4 Leitungslängen der Tasteranschlüsse max. 200 cm Kurzschlusschutz ja Abmessungen 45 x 29 x 17 mm Weitere Informationen entnehmen Sie unserem Download Tab. Casambi - einfach erklärt Der Hersteller Arditi hat zum Thema eine ganze Videoreihe erstellt, in dem er alles rund um Casambi ausführlich erklärt. Hier ist der erste Teil der Reihe:

Multi channel DALI constant current (CC) dimmer by Lunatone Every channel of the DALI constant current dimmer has its own DALI address Configuration and control via DALI For the direct control of LED modules with current input The outputs are dimmable from 1% to 100% Different variants for 350mA per channel in a small housing, further 1000mA per channel in a big housing are available Configuration via DALI cockpit and DALI USB interface Integrated short protection The following versions are available: Two channel versions, with 2 DALI addresses each (one address per channel) Up to max. 2x 350mA output currents: 89453845-350With a collectice positive pole: 89453845-350DEWith a collectice minus pole: 89453845-350GMDEUp to max. 2x 500mA output currents: 89453845-500With a collectice positive pole: 89453845-500DEWith a collectice minus pole: 89453845-500GMDEUp to max. 2x 700mA output currents:With a collectice positive pole: 89453845-700With a collectice minus pole: 89453845-700GMUp to max. 2x 1000mA output currents: With a collectice positive pole: 89453845-1000With a collectice minus pole: 89453845-1000GM  Three channel versions, with 3 DALI addresses each (one address per channel) Up to max. 3x 350mA output currentWith a collective positive pole: 89453846-350With a collective minus pole: 89453846-350GMUp to max. 3x 500mA output currentWith a collective positive pole: 89453846-500With a collective minus pole: 89453846-500GM  Up to max. 3x 700mA output currentWith a collective minus pole: 89453846-700GM Four channel versions, with 4 DALI addresses each (one address per channel) Up to max. 4x 350mA output currentWith a collective positive pole: 89453855-350With a collective minus pole: 89453855-350GMUp to max. 4x 500mA output currentWith a collective positive pole: 89453855-500With a collective minus pole: 89453855-500GMUp to max. 4x 700mA output currentWith a collective minus pole: 89453855-700GM  Other technical data: Output voltage range: 3V-45V (with 48V supply) Supply: 12VDC-48VDC resp. 56VDC Control input: DALI Temperature: -15 °C - 50 °C resp. -20 °C - 60 °C Protection type: IP20 Condition after return: depends on the DALI settings Max. cross wire section: up to 2,5 mm² Dimensions: Check the data sheet

CASAMBI light control 5-channel This compact, highly efficient LED dimmer has a CASAMBI control function and enables convenient operation with a tablet or smartphone. Incandescent lamps, dimmable LED lamps and control gear for LEDs and halogen lamps can be put into operation with this 5-channel Casambi dimmer. However, it is not suitable for magnetic transformers. (cf. has an additional channel compared to the "PWM4")   Further product properties and Features: • Gateway is not required, but can be set up • Integrated antenna • Installation in flush-mounted box • Protection class 3 • Ideal for LED strips RGB + Tuneable White • up to 4A output current per channel • up to 7.5A total output current Adjustable profiles, operating modes: • 5 independent channels • RGB operation • RGB + W operation • RGB + TW operation • Tuneable White (TW) Setup and operating instructions: We recommend installing the free CASAMBI app. It is available in the "App Store" as well as in the "Play Store". This gives you the following options when using the 5-channel Casambi dimmer:   • Control of brightness, light color and color temperature • Configuring luminaires and luminaire networks • Creation of scenes and animations (color gradients) • Automatic detection of new devices • Intelligent timer and gallery functions • Define sharing options ("only me", "all", "only with password", …) Technical data for 808835:  Article number 808835 Type DEBT5PRO14-192 Supply input 12..24 Vdc Signal input BT 4.0 (2,4 GHz) lite @ smart device Radio signal 2,4..2,483 GHz; 4 dBm Max output current 4,0A per channel Max output power 12Vdc 50W per channel / 96W total Max output power 24Vdc 100W per channel / 192W total PWM-frequency 10 000 Hz Ambient temperature -20..+40 °C Max. Rated temperature 60 °C Degree of protection IP 20 Dimensions 103×68×31 mm For more information, please refer to the data sheet in the download tab. Casambi App at Appstore Casambi App for AndroidCASAMBI light control 5-channel

Universal Radio Switch 2-/4-Channel 55x55 with Wireless EnOcean Radio Technology This battery-free EasySens® radio switch can be used to control lights and blinds or roller shutters using EnOcean wireless technology. The device is easily and flexibly installed on glass and plaster using adhesive pads or screws. Depending on the variant, one or two switch rockers (2-/4-channel) are available for operation, with the data being transmitted immediately when the switch is pressed. In addition, the power supply is ensured by an integrated electrodynamic energy generator. The wireless switch is also available in different housing colors. Furthermore, a luminescent intermediate frame (yellow, green luminescent) is available. Product overview / features: Universal wireless switch with EnOcean (IEC 14543- 3-10) radio technology with a transmission power <10mW in different variations: Design and functionality: lighting, blinds/shutters Operating elements: 2-channel , 1 switch and 4-channel, 2 switches Housing colors: aluminum, anthracite, Jung aluminum, pure white brilliant, pure white matt Robustness against temperatures from -25° C to 65° C and up to 85% humidity Maintenance-free electrodynamic energy generator for power supply Suitable for all common switch ranges with 55x55 mm inner diameter, e.g. Berker, Busch-Jaeger, Gira, Jung, Merten and Peha (Please specify the desired intermediate frame when ordering.) Notes on operating functions and assembly: The actuation force of each button is 7 N, with a actuation path of 2 mm is covered. The corresponding number of switching cycles is greater than 50,000. During assembly, it is possible to glue the switch frame directly to the wall or to screw it onto existing flush-type boxes. Make sure that t he surface is flat and free of dust in order to avoid malfunctions. Plastic frame is part of the delivery content. On demand, you can order frames in other materials like glass and metal for an additional charge. References: General information about easySens radio and airConfig software Overview of EnOcean radio telegrams Technical Data: Purpose Lighting, scene and shading control Functions Lighting Blind / roller shutter Operating functions Light on / off Blinds up / down Labeling {O / I} {?/?} Operating elements 2-channel 4-channel 2-channel 4-channel Radio technology EnOcean (IEC 14543-3-10), EEP F6-02-02 (RPS) Transmission power <10 mW Frequency 868 MHz Data transmission / Transmission interval Immediately on using the switch Operating range temperature - 25° C to + 65° C Operating range humidity Max. 85% rH, non-condensing Power supply Maintenance-free electrodynamic energy generator Enclosure PC Housing color Each aluminum, anthracite, Jung aluminum, pure white brilliant or pure white matt Mounting Flat on the surface, glue or screw Delivery content Incl. 2 labels with read-out transmission ID, including adhesive foil for mounting Dimensions (LxWxH) 73x73x15 mm Packaging Sustainable folding carton Dimensions of packaging (LxWxH) 90x90x35 mm Specification - Suitable switch ranges from popular manufacturers: Berker Berker S.1 with intermediate frame, Berker B.7 glass Busch-Jaeger Busch-Jaeger Busch-balance & reg; SI with intermediate frame Gira Gira E2 with intermediate frame, Gira E3 with intermediate frame, Gira Esprit with intermediate frame, Gira Event with intermediate frame, Gira area switch with intermediate frame, Gira Standard 55 with intermediate frame Jung Jung A 500 with intermediate frame, Jung A 550 with intermediate frame, Jung A creation with intermediate frame, Jung AS 500 with intermediate frame Merten Merten 1-M with intermediate frame, Merten Antik with intermediate frame, Merten Artec with intermediate frame, Merten Artec stainless steel with intermediate frame, Merten Atelier-M with intermediate frame, Merten M-Plan with intermediate frame, Merten M-Pure with intermediate frame, </ li> Merten M-Smart with intermediate frame Peha Peha Aura, Peha Aura glass   For more information, please refer to the data sheet in the download tab.

Accessories for the Thanos EVO room operating unit Here you can order optional accessories for the Thanos EVO room control unit. The following accessories are available: PSU-UP24 - flush-mounted power supply unit 24 V Typ Accessories Output Voltage 24V = Output Current 0,5 A temperature range (°C) -10..+50 Temperatur application range (°C) -10..+50 Operating range Humidity max. 90% rH non-condensing Power supply 195..264 V ~ (49..61 Hz) Colour schwarz Protection class IP20, according to DIN EN 60529 Mounting Flush-mounted in standard flush-mounted box (Ø=60 mm, depth min. 45 mm) Packaging Dimensions (mm) 105 x 55 x40 Packaging Folding carton Device Dimensions (mm) 55 x 55 x 26 USB-Interface for Thanos EVO Type Accessories Application Interface translation Configuration USEapp, uConfig USB-Interface KNX Type Accessories Application Interface Translation Interface KNX (TP) Configuration ETS (KNX) Network technology KNX (TP1) Power supply Supply via BUS, 29 V = SELV Display LED for status feedback, green, red Housing ABS Colour blau Connection BUS max. 1.5 mm², screw terminal, pluggable, USB A BLE-Dongle Micro-USB for Thanos EVO Type Accessories Application Interface Translation Interface Bluetooth® Low Energy Configuration USEapp, uConfig   For further information, please refer to the data sheets in the download tab.  

DALI ROT Accessories - Rotary Knob / Cover and Adapter DALI ROT is a dimmable rotary switch including a control module for switching, dimming and setting the color or color temperature of LED luminaires. With the right accessories in the form of a cover and an adapter, DALI ROT is ideally suited for standard flush-mounted boxes and is used in combination with most switch programs. The corresponding DALI ROT control module can be found under the following link: Dimmable Rotary Switch DALI ROT - Control Module. The rotary knob or the cover is available in different versions depending on the design and color. Construction: Standard or Jung Series A Color: Black or White Specification DALI ROT Accessories: Article Number Item Name Z-86459822-C-J-W Rotary knob and cover, Jung Series A, alpine white Z-86459822-C-J-S Rotary knob and cover, Jung series A, black Z-86459822-C-0-W Rotary knob and cover, standard, white RAL9016 Z-86459822-C-0-W Rotary knob and cover, standard, black Z-86459822-A Adapter 6 mm For more information, please refer to the manufacturer's data sheet in the download tab.

AL-500-00 DALI Eingangsmodul 4-Kanal The AL-500-00 DALI input module 4-channel is a universal module for reading in 4 potential-free switching contacts via DALI (V1). The device is supplied from the DALI bus. The signals are evaluated via the BL-204-10-868 EVG FLEX, EnOcean DALI controller and thus integration into the Enocean network. Technical Data:   DALI Slave   Number 1 Current consumption typ. 4,1 mA Input voltage DALI 16V DC (+/-5%) Galvanic isolation No Environment conditions   Operating temperature 0°C to +50°C Storage temperature -20 °C to +70°C Humidity 10% to 95%, non condensing Examinations / Approvals In general: 2011/65/EU RoHS Directive EMC immunity: according to EN 61000-6-2 EMC interference: according to EN 61000-6-3, EN 61000-6-4 Remove further data from our download tab Application example AL-500-00 with EnOcean DALI controller BL-204-10-868 EVG FLEX The following video shows the use of an AL-500-00 DALI 4-channel input module on a BL-204-10-868 EVG FLEX. The AL500-00 is connected to the DALI bus and is supplied by it. The first input A is connected with a conventional light switch. On the left side of the picture you can see the software BL-PC-FLEX-2. This has been started and the EnOcean USB stick is connected (COM field highlighted in green). If the button is now pressed, it first appears on the right in the EnOcean Explorer as "available". With a double click this is "projected". The key press corresponds to “A1.” The ON/OFF/DIM function is configured as DALI BROADCAST for the A1 key and the configuration is loaded into the EnOcean DALI controller BL-204-10-868 EVG FLEX. At the end you can see the desired functionality when you press the button. .videoHolder{max-width:1120px;max-height:630px;}.videoWrapper {max-width:1120px;position: relative;padding-bottom: 56.25% !important;height: 0;}.videoWrapper iframe {position: absolute;top: 0;left: 0;width: 100%;height: 100%;max-height:630px; max-width:1120px;} AL-500-00 with BL-204-10-868 EVG FLEX V1   Video from Deuta Controls on the AL-500-00 with BL-204-10-868 EVG FLEX V1

AL-520-00 DALI POWER SUPPLY The AL-520-00 is a quite reliablesupply with a voltage of 230V AC and a DALI compliant output voltage of up to 250mA.The device is 36mm wide and has to be mounted on a standard DIN rail. Features AL-520-00 : Supply voltage: 230V AC 1x DALI power supply output (2 push-in contacts for DALI + and DALI -) 1x Status LED Please remember that you need one supply for each DALI line (max. 64 DALI ballasts). Technical data: DALI Number 1 Outout current Max. 240 mA(+/-5%) Output voltage Typ. 16V DC (+/- 5%) Supply   Supply voltage 230V AC (+/- 10%) Power consumption max. 5,0W / 22mA Backup integrated, not resetting Environmental conditions Operating temperature +0°C to +50°C Storage temperature -20°C to +70°C Humidity 10% to 95% rel. humidity, non condensing Protection class IP20 Demensions and weight   Weight 68 g Dimensions (in mm) 94 x 36 x 60 EMV EN 61000-4-3:2006 + A1:2007 + A2:2010 EN 61000-4-4:2012 EN 61000-4-5:2014 EN 61000-4-6:2013 EN 61000-4-11:2004 EN 55015:2013 + A1:2015 CISPR 15:2013 + IS1:2013 + IS2:2013 + A1:2015 DIN EN 61547:2010-03 VDE 0875-15-2:2010-03 EN61547:2009 IEC 61547:2009 DIN EN 61547 Ber. 1:2010-07 VDE 0875-15-2 Ber. 1:2010-07 EN 61547:2009 Ber. Zu DIN EN 61547:2010-03 Further information as well as the user and installation instructions can be found in the Download tab.

Accessories for the Aria Neolighter Now there are suitable accessories for the Casambi Bluetooth radio switch Neolighter.Available in three different housing versions: Wood brick Stone brick Silicone brick This allows you to stylishly house your Aria Neolighter in a small design remote control.

Battery-powered surface-mounted vibrations sensor for CASAMBI networks The battery-operated built-on vibration sensor for CASAMBI sends a radio signal to the CASAMBI network in the event of a shock (sensitivity adjustable with a trimmer). The vibration sensor can be configured and used in a variety of ways on smart devices (with Apple or Android) with the CASAMBI app. So e.g. b. controlling lights, triggering scenes and much more is possible. The vibration sensor is compatible with "Evolution" networks. The CASAMBI vibration sensor is available in the colours lightgrey black Specifications - 808973 - 808974 power input 3 Vdc radio signal 2,4..2,483 GHz; 4 dBm Max. range / outdoor max. 14 m, 70° horizontal, 128 Zonen30 m / 50 m battery CR2032 ambient temperature -20..+50 °C Degree of protection IP 20 dimensions 71 x 37 x 22 mm Advantages: wireless installation battery powered Battery included Easy to use: Changing the battery: Press in the long sides, lift off the cover (unscrewing not required) For decoupling: Microswitch behind hole in housing with metal pin or similar. push i  

Casambi wall switch without batteries General information about these switches: Radio switches for controlling Casambi devices have up to four freely programmable buttons Battery-free, as the energy is generated in an electrodynamic energy generator by pressing the button Radio switch is maintenance-free Due to the ability to be without batteries, it can be flexibly mounted The middle section can be used in frames from other switch series of the frame size 55x55mm (Jäger Direkt, Mertens, Gira, etc.) Setup and operating instructions: Initial programming must be done via tablet with NFC interface or smartphones with Android operating system For installation: Set network mode to "balanced" After successful setup with Android devices, the switch can also be managed and programmed with iOS systems Technical data for the Casambi wall switch: Variation 2 Buttons 4 Buttons Type RW2EBTW RW4EBTW Product number 808922 808924 Radio signal 2,402 - 2,48 GHz, Casambi Low Energy (BLE) Channels 2 4 Reach up to 10 meters in a room Lifespan > 50,000 switching operations Ambient temperature -20 - 65°C Dimensions 81 x 81 x 14mm Dimension middle part 55 x 55 x 14mm

Battery-powered surface-mounted magnetic sensor for CASAMBI networks The battery-operated built-on magnetic sensor for CASAMBI sends a radio signal to a CASAMBI network in the event of contact or loss of contact. The magnetic sensor can be configured and used in a variety of ways on smart devices (with Apple or Android) with the CASAMBI app. So e.g. b. controlling lights, triggering scenes and much more is possible. The magnetic sensor is compatible with "Evolution" networks. The CASAMBI magnetic sensor is available in the colours lightgrey black Specifications - 808723 - 808724 power input 3 Vdc radio signal 2,4..2,483 GHz; 4 dBm Max. range / outdoor max. 14 m, 70° horizontal, 128 Zonen30 m / 50 m battery CR2032 ambient temperature -20..+50 °C Degree of protection IP 20 dimensions 71 x 37 x 22 mm Advantages: •wireless installation •battery powered •Battery and magnet included ? •Easy to use: Changing the battery: Press in the long sides, lift off the cover (unscrewing not required) For decoupling: Microswitch behind hole in housing with metal pin or similar. push i  

NEW! EnOcean DALI Gateway Flex in installation housing, series BL The gateway establishes an EnOcean radio connection from EnOcean buttons to your DALI luminaires. So you can control/dim your DALI lighting via EnOcean radio. Special feature: Freely configurable! The Gateway Flex can be freely programmed by the user (individual button assignments, light scenes etc.) Integrated DALI power supply for up to ten slaves (maximum output current: 20mA). Installation housing: 4x socket output 5-pin WIELAND 230V AC + DALI. Useful for existing buildings and missing DALI bus from the switching unit to the luminaire unit. Further highlights: 230V Supply voltage No configuration tool required for commissioning Internal antenna Video Tutorial: PC software BL-201-FLEX for configuring the BL-201 EnOcean DALI gateways Technical Data: DALI Master Number 1 Master Output current Max. 34mA Output voltage 16V DC (+/- 5%) Galvanic isolation yes EnOcean Master Number 1 Master (bidirectional) Transceiver TCM310 Send / Receive yes / yes Antenna Integrated     Supply voltage 230V AC / 50Hz Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature +5°C to +50°C Humidity 10% to 95%, non-condensing Compatible EnOcean wireless buttons can be found here.

BL-202-10-868 EVG FLEX, EnOcean-DALI-Controller Freely configurable DALI control via the PC tool BL-PC-FLEX-2 (not included). Conduct the DALI commissioning wirelessly and, together with switches, motion detectors and daylight sensors, simply convert the customer's requirements into a solution. The EnOcean DALI controller type BL-202-10-868 EVG FLEX offers a DALI master as well as an integrated DALI power supply for the direct connection of up to 15 slaves (out max. = 30 mA) without the need for a separate DALI power supply. In addition, an EnOcean radio transceiver is integrated. These features enable the simple and easy combination of DALI ballasts or DALI LED drivers and light switches with wireless EnOcean technology. The device is supplied with 230 V AC mains voltage. It offers freely configurable functions via the PC tool BL-PC-FLEX-2 (formerly BL-PC-FLEX) (not included). Product characteristics: 230 V AC supply voltage 1x DALI Master Integrated DALI power supply for up to 15 DALI slaves (Iout max. = 30 mA) 1x EnOcean (TCM310) Internal antenna PC configuration tool BL-PC-FLEX-2 for wireless configuration of control functions Mounting in housings or profiles Technical Data: DALI Master Number 1 Master Output current DALI max. 30 mA via integrated power supply (max. 15 slaves) Output voltage 16V DC (+/- 5%) Galvanic isolation Yes EnOcean Master Number 1 Master  Transceiver TCM310 Transmit / receive Yes / yes Antenna Integrated Frequency range used 868.0 - 868.6 MHz Maximum transmission power typ. 3 dBm @ 868.300 MHz Transmit/receive center frequency 868.3 MHz / ASK (EnOcean) Recipient category according to EN 300200 2   Environmental conditions Supply voltage 230V AC  Power consumption Typ. 1,4W, max. 2,0W Operating temperature +5°C to +50°C Storage temperature -20°C to +70°C Humidity 10% to 95%, non condensing Tests / Standards: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +A2:2013 ETSI EG 203 367 DIN/EN 55032 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 EN/IEC 61000-4-5 EN/IEC 61000-4-6 Take further data from our download-tab.