STAMP LED Marker light 3/6 W, 1/2 light emissions

LEDON Panel Comfort + LED recessed luminaire 4000K - 33W The bright and efficient grid light is the perfect solution for all applications with high demands on lighting. With its glare rating UGR <19 and the high color rendering of Ra 90, this LED panel is suitable for offices with VDU workplaces, schools and many other professional areas. The LEDON Louvrelight is available as square version in 623 x 623mm, 620x620mm and 597x597mm (Lenght x Width) version. In addition, there is a rectangular version in the standard dimension 1197 x 297mm (Length x Width) available. Special feature - simple light control with MOTION ADAPT: The MOTION ADAPT converter combines the functions of a converter, a high-frequency motion detector and a daylight sensor in one device. The input current, the detection area, the hold time, the daylight sensor and the stand-by time and dimming level can be set via dip switches for the respective situation. More about this in our download area. (Download tab) 5 Years warranty 3 Years full warranty Contain power supply in delivery High luminous flux (4.000lm) and ingenious light efficiency (121lm / W) Beam angle of  90° Neutral white light (4000K) with a high color rendering index Ra = 85 Five years manufacturers warranty Phasedimming on request  Specifications of LED Panel from LEDON:    General Data:   Form square or rectangular Housing material Metal frame / Plastik Light Guide Design white Rated life 50.000h Count of switching cycles before premature lamp failure 100.000 Engine / start-up period to 100% <0,5s Mercury content 0,0mg    Photometric data:   Luminous flux 4000 Lumen Light color Neutralwithe Light temperature 4000K Color rendering index Ra 90 Light output / efficiency 121 lm/W Lumen maintenance factor at the end of rated life 80% Unified blend value <19 UGR Beam angle  90°    Electrical data:   Nominal capacity 33 W Performance factor >0,97 Nominal voltage 35-41 VDC Constant Current operation 900mA    Height & Weight   Dimensions and weight please refer to the data sheet   Further technical information in DOWNLOADS tab.

LED Recessed floor luminaire PASSUM-UP 33W from A.L.S. These recessed luminaires optimally meet the requirements for upwards or downwards illumination. The innovative technology and the variety of combinations are to be emphasized here. The recessed luminaires are corrosion-resistant and passable with exchangeable covers, which impress with their versatile installation options. The luminaire housings with LED or conventional lamps can be swiveled or adjusted, thus allowing the inclination of the light for perfect illumination of the surfaces. Features of the PASSUM-UP series: Structure: Luminaire housing made of primary aluminum with reduced copper content, painted with anti-corrosive polyester powder after phosphorus chromating Tempered, transparent glass T = 40 ° C; Thickness from 6 to 12 mm and max. Load of 2,000 to 3,500 kg 0.5 m floor-retractable H07RN-F cable with IP68 connection Built-in box made of stabilized technopolymer The covers are available in: round with primary aluminum with double coating; round and square made of INOX AISI 316L stainless steel with stainless steel hexagon screws Manufactured in accordance with European standards EN 60598-1: 2015 Technical data: Light source LED LED Colour temperature 3000K 4000K Beam angle 38° pivoted 25° System power 33W Connection voltage 230 V Luminous flux 1060 lm Colour rendering index CRI >80 Protection class 1 Mechanical  load IK10 passable 3500Kg Protection type IP67 Lifespan L80 B20; 60.000 h Dimension round Ø245mm INFO: incl. Luminaire housing, cover, external driver, floor-mounting box and longitudinal connector For further information please refer to the data sheet in the Download-tab.

Elegant wall mounted luminaire with IP65With this outdoor wall mounted luminaire, the beam angle can be adjusted individually between 15 ° and 120 °. The housing is made of die-cast aluminium.  Further features: 2 light emissions directed upwards and downwards Protection type: IP65 Protection class: 1 Built-in electronic power supply Technical data: System power 10 W Luminous flux 499 lm Colour temperature 3000K Colour rendering index CRI >80 Beam angle 15°-120° System efficacy 50 lm/W Operating current 230 V Energy efficacy A++ - A Weight 0,649 kg Dimensions L=120*W=97*H=100 mmFor further information please refer to the data sheet in the Download tab.

Sturdy LED floor lamp 8W 230V - UV protection, IP65 Its essential design, aluminium structure, and LED light source allow this post light to fit into your garden discretely yet with personality. The LED floor lamp has a very good colour rendering and its sturdy structure has made it possible to reduce its cross-section to just 73x86 mm, thereby preventing its base from protruding from its profile. STANDING is a LED floor lamp for walkways and driveways and can be used for lighting gardens and flower beds. The product is available with different colour temperatures (warm white and neutral white) as well as in different housing colours. Overview for LED floor lamp: LED bollard, with primary aluminum, 495mm height UV-stabilized paint very good colour rendering index (CRI > 85), very bright Protection type: IP65 and pprotection class:1 60.000 hours lifespan Incl. electronic power supply wirh built-in driver Equipped with a 0,5 m H05RN-F cable Manufactured in compliance with European standards EN 60598-1:2015 Note:Its structure allows another side-light or diffused light luminaires to be installed at the back Technical data:  Colour temperature 3000 K 4000 K Housing colour Graphite grey Metallized grey Graphite grey Metallized grey Articlenumber STAND-8WW6 STAND-8WW7 STAND-8NW6 STAND-8NW7 Light up with LED System power 8 W Colour rendering index (CRI) > 85 Power supply with built-in driver Connection voltage 230 V Energy efficacy A++ - A Protection class 1 Test certificates CE Mechanical load IK10 Surface UV-stabilized paint Material  Primary aluminum Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=86*W=73*H=495 mm For further information, please refer to the data sheet in the download tab.

Flexible LED outdoor light 4,5W/10W as mounted module - adjustable optics, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board).The function of STAMP as a marker light is underlined by the possibility to adjust the inclination of the optics (+ 13° or + 18°). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker This LED outdoor light is available in a version with 4.5W and 10W and in different color temperatures and housing colors. The 10W module can also be operated with 500mA constant current. On request, a dimming function by an external button is possible. Overview: LED Marker light from primary aluminium Adjustable optics by 13° / 18° integrated Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: System power 4,50 W 10 W Colour temperature 3000 K 3000 K 4000 K 4000 K Housing colour Graphite Metallized grey Graphite Metallized grey Article number STAMPA-4WW6 STAMPA-4WW7 STAMPA-10WW6 STAMPA-10WW7 STAMPA-4NW6 STAMPA-4NW7 STAMPA-10NW6 STAMPA-10NW7 Light up with LED Luminous flux 300 lm 800 lm Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V Operating current 25 mA 500 mA System efficacy 67 lm/W 80 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechnical load IK10 Material Primary aluminium Version adjustable optics +13° adjustable optics +18° Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=110*W=110*H=25 mm L=175*W=175*H=30 mm For further information please refer to the data sheet in the download tab.

Universal LED outdoor light 4,5W/10W as mounted module - adjustable optics, IP65 The new range of waterproof lamps for outdoor use, reinvents the concept of wall recessed fixtures. Indeed, the minimal 25-30 mm protrusion offers all the advantages of recessed installation, without requiring any wall cavity. The body, characterised by an essential and minimalist line, contains a high technology and excellent lighting efficiency LED which works directly at 230V (DOB - driver on board).The function of STAMP as a marker light is underlined by the possibility to adjust the inclination of the optics (+ 13° or + 18°). The downward orientation of light (for versions with antidazzle lid) and the possibility to regulate optical inclination, are features which identify it as a path marker This LED outdoor light is available in a version with 4.5W and 10W and in different colour temperatures and housing colours. The 10W module can also be operated with 500mA constant current. On request, a dimming function by an external button is possible. Overview: LED Marker light from primary aluminium Adjustable optics by 13° / 18° integrated Sturdy design (Protection type IP65, protection class 1, impact-resistent, waterproof) Good colour rendering (CRI>80) 60.000 h lifespan incl. power supply Special formworks enable flush wall mounting A dedicated spacer also enables side cable entry/ exit Note: Not possible with motion sensor 24V DC on request Technical data: System power 4,50 W 10 W Colour temperature 3000 K 3000 K 4000 K 4000 K Housing colour Graphite Metallized grey Graphite Metallized grey Article number STAMPE-4WW6 STAMPE-4WW7 STAMPE-10WW6 STAMPE-10WW7 STAMPE-4NW6 STAMPE-4NW7 STAMPE-10NW6 STAMPE-10NW7 Light up with LED Luminous flux 300 lm 800 lm Colour rendering index (CRI) > 80 Power supply incl. Connection voltage 220-240 V Operating current 25 mA 500 mA System efficacy 67 lm/W 80 lm/W Energy efficacy A++ Protection class 1 Test certificate CE Mechnical load IK10 Material Primary aluminium Version adjustable optics +13° adjustable optics +18° Protection type IP65 Lifespan L80 B20; 60.000 h Dimensions L=110*W=110*H=25 mm L=175*W=175*H=30 mm For further information please refer to the data sheet in the download tab.