LED panel 595x595 Tuneable White / Multi-Lumen with ext. driver

Aviora FL Panels with reflector microfacetted optics Modern design with revolutionary optics The special structure of the reflector microfacettes (Bartenbach development) of the Aviora generates a radiation of 85° FWHM (corresponds to 100° FWTM), without the generation of disturbing scattered light. Normally the beam angle of a luminaire is half the highest lux value of the light beam (Full Width at Half Maximum, FWHM). This is usually accompanied by a lot of stray light outside the beam, which causes disturbing glare. For this reason, Illuxtron panels also work with beam sizes that are based on the height of the 10% lux value (half the half-width or "Full Width at Tenth Maximum", FWTM). In other words, the LED panel directs the light exactly where you want it, onto the work surface and only slightly onto the walls with a pleasant transition. This makes it possible to meet the 500 lux requirement on the work surface of a 5 x 5 metre room with only 4 x 20 watts.   Features and benefits of the Illuxtron Aviora FL Casing color matt white RAL 9016 Material housing: metal   reflector glass: polycarbonate Dimensions 595x595 (XX=33) 620x620 (XX=27) Height 21 mm Application Inside area Beam angle (FWHM/FWTM)  standard 85°/100° UGR (4H8H 70/50/20) < 19 Colour consistency (MacAdam) SDCM3 IP Code IP20 IK Code IK03 Operating temperature (Ta) -20°C / +45°C Lifetime at 25° C L70B50 134.000 hrs. L80B50 82.000 hrs. L90B50 37.000 hrs. Safety sign EN60598 / EN62031 / EN62471 EMV Directive EN55015 Guarantee 7 years Energy class A+ Type incl. LED driver Input 220V - 240V/50Hz Protection class II Ripple < 3% Performance levels 37,3 W 56 W Power factor /Pf 0,98 0,95 inrush current 5A 50µS 20A 400µS   Aviora FL 595x595 / 620x620 All Aviora LED Panels are available with either 2700-6500K, 3000K or 4000K, as well as different lumen packages or powers, as well as ballasts included in the set (dimmable via Casambi, DALI, 1-10V&Push or switchable only) overview of available Aviora FL panels with article numbers. Colour temperature 3000 K 4000 K 2700-6500 K Luminous flux 4100 lm 5350 lm 4350 lm 5650 lm 3450 lm Power 37,3 W 56,0 W 37,3 W 56,0 W 26,6 W Luminous efficacy (with EVG) 110 Lm/W 96 Lm/W 117 Lm/W 101 Lm/W 139 Lm/W Art. No. Switchable XXED03MWF202 XXEE03MWF202 XXED03MWF302 XXEE03MWF302 - 1-10V & Push XXED03MWG202 XXEE03MWG202 XXED03MWG302 XXEE03MWG302 - DALI XXED03MWH202 XXEE03MWH202 XXED03MWH302 XXEE03MWH302 XXED03MW6T02 Casambi - - - - XXED03MW6U02 For further information on the Aviora FL panels, please refer to the data sheet in the download tab. Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.

Aviora Panel with reflector microfacetted optics Modern design with revolutionary optics The special structure of the reflector microfacettes (Bartenbach development) of the Aviora generates a beam angle of 85° FWHM (corresponds to 100° FWTM), without generation of disturbing stray light. Normally the beam angle of a luminaire is half the highest lux value of the light beam (Full Width at Half Maximum, FWHM). This is usually accompanied by a lot of stray light outside the beam, which causes disturbing glare. For this reason, Illuxtron panels also work with beam sizes that are based on the height of the 10% lux value (half the half-width or "Full Width at Tenth Maximum", FWTM). In other words, the LED panel directs the light exactly where you want it, onto the work surface and only slightly onto the walls with a pleasant transition. This makes it possible to meet the 500 lux requirement on the work surface of a 5 x 5 metre room with only 4 x 20 watts.   Features and advantages of the Illuxtron Aviora Panels Casing color matt white RAL 9016 Material housing: metal   reflector glass: polycarbonate Dimensions 595 mm x 595 mm (XX=33) 620 mm x 620 mm (XX=27) Height 69,5 mm Application Inside area Beam angle (FWHM/FWTM) Standard 85°/100° UGR (4H8H 70/50/20) < 19 Colour consistency (MacAdam) SDCM3 IP Code IP20 IK Code IK03 Operating temperature (Ta) -20°C / +45°C Lifetime at 25° C L70B50 134.000 hrs. L80B50 82.000 hrs. L90B50 37.000 hrs. Safety sign EN60598 / EN62031 / EN62471 EMV Directive EN55015 Guarantee 7 years Energy class A+ Type incl. LED driver Input 220V - 240V/50Hz Protection class II Ripple < 3% Performance levels 37,3 W 56 W Power factor /Pf 0,98 0,95 inrush current 5A 50µS 20A 400µS   Aviora 595x595 / 620x620 All Aviora LED Panels are available with either 2700-6500K, 3000K or 4000K, as well as different housing Colours, lumen packages or powers, as well as ballasts included in the set (dimmable via DALI, 1-10V&Push or switchable only) Overview of available Aviora panels with article numbers. Colour temperature 3000 K 4000 K 2700-6500 K Luminous flux 4100 lm 5350 lm 4350 lm 5650 lm 3450 lm Power 37,3 W 56,0 W 37,3 W 56,0 W 26,6 W Luminous efficacy (with EVG) 110 Lm/W 96 Lm/W 117 Lm/W 101 Lm/W 139 Lm/W Art. No. Switchable XX2503MW6E02 XX2503MW6L02 XX2503MW6F02 XX2503MW6M02 - 1-10V & Push XX2503MW6A02 XX2503MW6G02 XX2503MW6B02 XX2503MW6H02 - DALI XX2503MW6C02 XX2503MW6J02 XX2503MW6D02 XX2503MW6K02 XX2503MW6P02 Casambi - - - - XX2503MW6Q02 For further information on the Aviora Panels, please refer to the data sheet in the download tab. Note: The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.

Constant current driver for Illuxtron LED panels in MLMC versionIlluxtron exclusively uses constant current drivers from renowned manufacturers. The lifetime of LED constant current drivers determines the lifetime of a luminaire system, as well as the flicker of LED luminaires.The following properties are taken into account with regard to the constant current sources at Illuxtron: compliance with the health standards suitability for photo and video &&overvoltage protection H&outer luminous efficacy thanks to ripple-free drivers Protection against overheating Adherence to EU standards Other details for Illuxtron LED Power Supplies   Dimmability and use of CC power supplies The manufacturer offers various LED drivers from 350 mA to 1050 mA for operating the Illuxtron Mini Downlights. Depending on the selected power, the luminous flux (lumen output) of the connected panel is calculated. (see respective table in the luminaire description)Note: Special feature with Tuneable-White version 2 ballasts are required for operation to supply the two internal, separate LED modules and control them accordingly.Both ballasts together must not exceed the specified total output (e.g. 48.8 watts) and must be regulated accordingly to avoid overheating of the LED modules. In this example this applies to all listed LED drivers from 550 mA (grey background).Tuneable- White dimming (infinitely variable &change of the colour temperature) is only possible with dimmable drivers, with non-dimmable drivers (NoDim) only a switching on and off of the internal modules! Not suitable !  >&round overview of available LED drivers sorted by power and dimming functionnbsp; mA W    Lumen Output  Lumen Output (TW)  DALI  1-10V/Push  NoDim  TRIAC  3000K  4000K  2700-6500K (TW)  Ripple<3%  Ripple<3%  Ripple<3%  <20% 350 14.8 2350 2550 2350-2550 05CJ 05CH 05HA 05CG 500 21.6 3400 3600 3400-3600 05CJ 05CH 05HA 05CG 550 23,9 3700 3950 3700-3950 05CJ 05CH 05HA 05CG 700* 31,2 4700 4950 4700-4950 05CJ 05CH 05HA 05CG 900 41,0 6000 6300 6000-6300 05CM 05CM 05CK X 1050** 48,8 6900 7250 6900-7250 05CM 05CM 05CK X*  Please select the 700mA driver in the selection, all smaller currents (350,500,550,mA) are adjustable via DIP switches.** Please select the 1050mA driver in the selection, all smaller currents (900mA) are adjustable via DIP switches.> Further information on the constant current drivers can be found in the data sheets see Download Tabs: